Download presentation
Presentation is loading. Please wait.
1
Vocational school Jean De Berry
THE JOINERY WORKSHOP MACHINES USED TO PLANE IN FRANCE Vocational school Jean De Berry
2
Planing consists of : Step 1 : surfacing and squaring one face (reference n°1)and one edge (reference n°2). Step 2 : making the section of the piece . I start by making the width, I put the reference n°2 on the table and after the thickness ,I put the surface the reference n°1 on the table. Reference n°1 thickness Reference n°2 width
3
is used to plane a piece of wood .
The surface planer is used to plane a piece of wood . Adjust the infeed table Adjust the outfeed table extraction Bridge protector
4
The surface planer Power control The fence Infeed table Outfeed table
5
Is used to thick a piece of wood
Thickness planer Is used to thick a piece of wood Extraction Adjustment of thickness Power control Raise and lower the table
6
A four side straightening
Is used to plane and square a piece of wood Protection extraction Power control Tools of a four side straightening
7
Cutter Head used on these different machines
8
THE END
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.