1. FINN-POWER e-technology - 14 years of excellence
19 September, 2018
NEW E6
FINN-POWER e-technology years of excellence
19/9/18
All Rights reserved - Antti KuusisaariAll Rights reserved, Antti Kuusisaari

2. All Rights reserved - Antti Kuusisaari
19 September, 2018
19/9/
All Rights reserved - Antti Kuusisaari

3. e-technology 14 years of exellence
19 September, 2018
First E5 introduced 1998
Servo electric punching 480hpm
Upforming with programmable NC axis
Touch screen Windows based GUI
ISC, Intelligent Stroke Control
19/9/
All Rights reserved - Antti Kuusisaari

4. e-technology 14 years of excellence
19 September, 2018
NEW E6 13-series offers as standard:
High speed punching with full programmability 1,000hpm
Low noise level – 20 or 30 ton punching force available
3 clamps and PCS (optional 4)
Fast indexing 250 rpm
Full 3 m working area without repositioning (6 m with one repo)
150m/min positioning speed (X+Y)
Touch screen Windows XP based with Tulus user interface
ISC, Intelligent Stroke Control - automatic tool length measuring
Indexable upforming with newest forming modes (option)
Central lubrication + no oil and filter changes
Easy loading with 4 pins
Full range of options available
Express, Compact Express & LST with storage connections
19/9/
All Rights reserved - Antti Kuusisaari

5. running costs E6 vs. C6 costs E6 0,4 € /h 0,25 € /h 0,65 € /h
19 September, 2018
nergy costs Maintenance Total
costs
E6 0,4 € /h 0,25 € /h 0,65 € /h
C5 (F4) 1,03 € /h 0,50 € /h 1,53 € /h
C5 (F3) 2,39 € /h 0,55 € /h 2,94 € /h
19/9/
All Rights reserved - Antti Kuusisaari
Calculation used 4000h/year, 0,0994€/kwh/Germany

6. E6, electric requirements
19 September, 2018
Connection power 15kVA
Average consumption 4 kW
Main fuses 3x20A
19/9/
All Rights reserved - Antti Kuusisaari

7. All Rights reserved - Antti Kuusisaari
E6, punching force
19 September, 2018
Standard 20 ton
Optional 30 ton
19/9/
All Rights reserved - Antti Kuusisaari

8. New punch actuation system
19 September, 2018
Double wedge system
Ball screw and overload protection
Less moving mass, less inertia
Fast punching speed, fully adjustable in both directions
Position over the sheet fully adjustable (S-value)
Position under the sheet fully adjustable (P-value)
High static force in forming
Low tonnage load for mechanics
Upforming cylinder 20 ton
Closed circuit water cooling – suitable for high ambient temperatures
19/9/
All Rights reserved - Antti Kuusisaari

9. All Rights reserved - Antti Kuusisaari
E6, punching speed
19 September, 2018
Marking 2,500 hpm
1mm step 1,000 hpm
25 mm step 500 hpm (9mm stroke length
250 mm step 200 hpm (9mm stroke length)
19/9/
All Rights reserved - Antti Kuusisaari

10. All Rights reserved - Antti Kuusisaari
E6, Axis
19 September, 2018
Sheet positioning speed 150 m/min
Index tool rotation speed 250 rpm
Tool change time 0.5 – 3 sec
19/9/
All Rights reserved - Antti Kuusisaari

11. Production time comparison
19 September, 2018
Production time comparison
Nest shown run with different PRIMA POWER machines:
A5: 14 min 30 sec.
X5: 13 min 3 sec.
E5x: 11 min 25 sec.
C5: 10 min 51 sec.
C6: 9 min 9 sec.
E5: 10 min 40 sec.
E6: 10min 25 sec.
NEW E6: 8 min 29 sec. 23 % faster
19/9/
All Rights reserved - Antti Kuusisaari

12. All Rights reserved - Antti Kuusisaari
E6, noise level
19 September, 2018
19/9/
All Rights reserved - Antti Kuusisaari
Note: standard noise reduction methods were used in test.

13. Standard turret template
19 September, 2018
The turret has a total of 20 tool locations offering full customization for customer
Fixed or index tools and Multi-Tools® can be chosen.
Total number of tools can be increased even to over 200 by adding Multi-Tool® stations.
Indexable multi-tools available as option
19/9/
All Rights reserved - Antti Kuusisaari

14. All Rights reserved - Antti Kuusisaari
New turret template
19 September, 2018
16 all-index turret
Max tool capacity 384
Max index tool capacity 128
Example turret has 63 tools which of 13 index tools
Available 13.3 series E5, E6, SGe (Not for Ex-series)
Trumpf tools can be used with ”Trapter”
19/9/
All Rights reserved - Antti Kuusisaari

15. ”Swift Setup” Tool System
19 September, 2018
Save time and trouble and
eliminate costly errors!
19/9/
All Rights reserved - Antti Kuusisaari

16. All Rights reserved - Antti Kuusisaari
Easy manual loading
19 September, 2018
Easy loading for E6 machine including: - Sheet support rolls for heavy material - Full featured easy loading with 4 loading pins - Sheet loading always close to table edge with simple push movement - Pin 4 is for very small blanks (e.g. A4 paper size)
19/9/
All Rights reserved - Antti Kuusisaari

17. All Rights reserved - Antti Kuusisaari
E6 standard layout
19 September, 2018
19/9/
All Rights reserved - Antti Kuusisaari

18. Automatic material handling
19 September, 2018
Compact Express:
Integrated loading & unloading devices
Fast loading and unloading cycles
Compact lay-out
Sheet size 1,500 mm x 3,000 mm
Material capacity 3,000 kg
Different operating modes
Material loading without stops
Combo & FMS connections available
19/9/
All Rights reserved - Antti Kuusisaari

19. All Rights reserved - Antti Kuusisaari
E6 standard layout
19 September, 2018
19/9/
All Rights reserved - Antti Kuusisaari

20. All Rights reserved - Antti Kuusisaari
E6+CE+Combo
19 September, 2018
19/9/
All Rights reserved - Antti Kuusisaari

21. Automatic component handling
19 September, 2018
Loading stacking system – LST
Automatic loading of sheet to the machine
Pickup of parts from machine
Sorting & stacking of parts to the programmed coordinate
Unloading of skeletons
Sheet size 1,500 mm x 3,000 mm
Compact layout with UDC
Several table alternatives
Short & long version
Optional DSD
Combo & FMS connections available
19/9/
All Rights reserved - Antti Kuusisaari

22. All Rights reserved - Antti Kuusisaari
E6 + LST
19 September, 2018
19/9/
All Rights reserved - Antti Kuusisaari

23. Why servo electric machine…?
19 September, 2018
It has lower connection power
It has lower electric consumption
It has lower maintenance costs
It is more accurate in punch control
It is more accurate in forming
Upforming is servo controlled and programmable
It has same tonnages than hydraulic machines
It is more productive than hydraulic machines
There is no oil inside – environmental aspects
No background noise – lower noise when punching
Reliable – long life time
All newest tooling options
All newest machine options
19/9/
All Rights reserved - Antti Kuusisaari

24. All Rights reserved - Antti Kuusisaari
19 September, 2018
19/9/
All Rights reserved - Antti Kuusisaari