1. Mike Knox WA0KKE Amateur Slow Scan Television
SSTV
Mike Knox WA0KKE
Amateur Slow Scan Television
9/21/2018

2. Topics of Discussion History of SSTV What Equipment is Needed?
Slow Scan vs Fast Scan
Some favorite Circuits.
How Much Does it Cost?
What Kind of Images are Sent?
Problems?
Where do I look for SSTV Signals?
Why SSTV?
Etiquette
Resources
Demo Time
9/21/2018

3. History of SSTV Amateur SSTV has been around since 1958.
SSTV started out with surplus radar display tubes with very long persistence ("P7") phosphors. This allowed an image to be painted on the screen over a period of a few seconds.
Flying Spot scanners Were used to “look at pictures” and send signals to Tape Recorders.
Pictures were stored on tape recorders and on Polaroid pictures.
9/21/2018

4. History of SSTV
1973: SSTV Monitor, using a long persistence display-tube. Fastscan to slowscan tv camera converter (sampler).
1975: First commercially available digital memory SSTV-Scanconverter SFC-1404 (was displayed on the 1975 Geneva ITU Show and designed by DL2RZ).
9/21/2018

5. History of SSTV
1976: First combined Receive&Transmit-SSTV-Scanconverter SC-420 with integrated Keyboard and Lightpen.
1978: First Color and High-Resolution Transmit&Receive SSTV-Scanconverter SC-422A. First system using the unique line sequential RGB-color transmission scheme, which directly led to today's color SSTV-standards (M1/2 S1/2, WRAASE180).
9/21/2018

6. History of SSTV
1981: First combined high-resolution color sstv and fax scanconverter SC-1. This unique system did not only allow to easily generate live sstv pictures with any standard black&white camera but also allowed reception of high resolution fax and wefax images from polar orbiting and geostationary weather satellites and to convert fax to sstv and vice versa.
9/21/2018

7. History of SSTV
1986: High resolution color sstv & fax scanconverter SC-2, allowed higher than tv-quality images (512 pixels per line) to be transmitted via ham radio. Became a difficult to reach standard for all software developers.
1993: SC-3 SSTV & FAX-PC-Scanconverter with DK7BO-DOS-Software.
9/21/2018

8. History of SSTV
1995: First true Windows SSTV-Program "Charly" developed by DJ6PS for the SC-3 PC-Scanconverter.
1997: SC-4 SSTV-PC-Scanconverter designed by DL2RZ with fully multitasking Windows 95/98 Software "Charly 4.0" written by DJ6PS
9/21/2018

9. What Equipment is Out There?
Some Commercial Equipment used:
The legendary Robot 1200C scan converter (Discontinued in 1992)
SUPERSCAN 2001
TSC-70
PC Based Stuff:
Pasokon TV
SSTV Explorer
ViewPort VGA
MSCAN
PC SSTV 5
9/21/2018

10. What Equipment is Needed?
Sound Blaster with the Slow Scan II software
Some Multi-mode TNC's
Minimum requirements of your PC:
IBM PC with '486 or higher CPU Running at 133 Mhz Min.
Color VGA display. Any VGA card will work but one capable of 800 x 600 resolution with at least 32k colors is recommended for best results.
8 Megabytes of memory.
Sound Card.
9/21/2018

11. Minimum requirements To save the CPU power, try the following steps.
- Increase the buffer size of the soundcard (select Option, select the Misc tab, and increase the value in the sound buffer size) - Disable the RxBPF (select Option, select the RX tab, and check RxBPF OFF) - Disable the FFT display (select View and turn off the FFT display) - Decrease the order number of the PLL OutLPF (select Option, select the RX tab, and decrease the number in the order of OutLPF) - Choose RX buffer FILE or turn it off (select Option, select the RX tab, and check   NONE or FILE in the RX buffer pane) - Turn the TX BPF off (select Option, select TX tab, and uncheck Tx BPF)
The RX buffer temporarily stores the receiving or just received image to get it back to the RX window after adjusting the slant and phase. The buffer stores 270-second sound data, and therefore it would cause page swapping if the RAM is selected or if the physical memory size of your PC is not sufficient to keep the data on the memory. If you have intermittent halts during the receive operation, please select FILE or turn it off.
9/21/2018

12. Slow Scan vs Fast Scan
Slow scan is sending an audio signal with the information embedded. Similar to a FAX.
Fast scan is a wide bandwidth rf signal (Wider than the 2 Meter band) similar to broadcast TV.
We will be talking about Slow Scan TV
9/21/2018

13. Places to Find Project Help
Homebrew articles:
73 Amateur Radio Today -- August 1992
QST -- January 1993
QST -- January 1994
Radio Fun -- February 1995
All you need is a Rig and a Computer with a sound card and one of the circuits below.
9/21/2018

14. All You Need to get Started
9/21/2018

15. Another Ckt.
9/21/2018

16. And Another
9/21/2018

17. Additional Circuits
9/21/2018

18. $ Cost $ From a few Cents to a few Dollars.
If you have a Computer and Sound Card.
9/21/2018

19. Pictures From the Past
9/21/2018

20. What Kind of Pictures are Sent Today?
9/21/2018

21. What Not to Send
9/21/2018

22. What Kind of Pictures are Sent Today?
9/21/2018

23. Problem with MMSSTV
Paulitis is a condition that may exist in MM-SSTV. It is named after Paul W9CQ who first discovered and identified the symptoms in mid March The characteristics are poor image quality, splotches, layering of colors and lack of depth to the image.
Paulitis appears to be caused when MMSSTV is installed and initialized when Windows is running with a color mode of less than 24-bit True Color. When MMSSTV is installed and run in this condition, all images imported through the MMSSTV Picture Clipper appear to be converted to 65,535 color mode when pasted into the TX window. The contents of the corrupted TX window are automatically saved in the Current.bmp file in the Stock folder. Even if the Windows color mode is later changed to 24-bit or higher color depth, any image pasted into the TX window through the Picture Clipper while a "corrupted" Current.bmp file exists in the Stock folder will assume the "corrupted" color mode. Paulitis can be exterminated at any time by simply deleting the corrupt Current.bmp file from the Stock directory. 73, John -- K9FB
9/21/2018

24. Paulitis- What it looks like.
9/21/2018

25. What Frequencies?
3.845
3.857
7.171
14.230
14.233
21.340
28.680
145.5 MHz
9/21/2018

26. What This Means SSTV is a way of SEEING who you are talking to.
One of the many MODES of Amateur Radio.
Anyone can get into it.
9/21/2018

27. What We Need to Do Get MORE Folks on SSTV. Start a Slow Scan Net?
Get (OXB) Dave to Take More Pictures of Shacks.
9/21/2018

28. Etiquette
VERY IMPORTANT: Before starting to TX a picture on a frequency, please ask in PHONE "Is this frequency in use for SSTV ??" Never transmit if you hear any other signals !
SSTV is a lot more than "TX pictures". Use your mic between pictures ! Give comments about the RX/TX pictures ! Ask if the station is ready for your next picture ! When you want to answer a CQ picture, first ask the CQ'ing station in PHONE if he's ready for your picture ! This will avoid a lot of doubles and QRM !!!!!
Never BREAK INTO a SSTV QSO by sending a picture ! Again BREAK IN in PHONE !!! Transmitting a "QRZ ?? QRZ ??" Picture is also not the right way to get a contact if there is QRM. Try a PHONE contact !
9/21/2018

29. Etiquette
28.680, and are calling frequencies. Try to QSY to a clear spot when you want to make a QSO with another station. The chance your QSO will be disturbed by a CQ picture is a lot less.
20 meters is really overcrowded (and not only with SSTV!). Try the higher bands. 10 meters for example has a sea of (unused !!) space. Send a CQ picture on a "dead" band. You will be surprised at the answering station !! And mostly QRM free! (SSTV gets through when voice doesn't).
Try to be original in your pictures ! Station related pictures (shack, antennas, QTH, area, family etc) make SSTV really attractive ! Please don't transmit pictures containing PORNO, politics, commercials etc.
9/21/2018

30. Etiquette
Very important: Use the suggested SSTV frequencies with 3Kc spacing !!!
Here are the suggested SSTV frequencies :
10 Meters : =calling frequency , , =K3ASI repeater =ON4VRB repeater.
15 Meters : , , =calling frequency , Avoid SSTV around because there is a Phone DX Net there !
20 Meters : =calling frequency Avoid SSTV on because there is a Phone DX Net there!
80% of all SSTV traffic is done on those frequencies so please don't transmit SSTV pictures BETWEEN those suggested frequencies, it will create QRM!!! 3Kc spacing is really a must for not interfering with nearby stations !!
9/21/2018

31. Etiquette
Don't hesitate to help (and sometimes even blame) stations who are not using the right operating practices. And think about this; everybody makes mistakes.
9/21/2018

32. Resources
Slow Scan Television Explained by Mike Wooding G6IQM ( ISBN )
For MAC
9/21/2018

33. DEMO Time
SSTV in Action.
9/21/2018