1. UTD viewer Links to be deleted (NRT viewer)
Coverage
Time
Ideally all hourly UTD values since 01/01/current year
If not possible at least 10 days of hourly values switching to daily mean value in past
Pollutants and averaging time
CO, O3, NO2, SO2, PM2.5, PM10 – hourly data (or daily mean value if not possible)
Only valid data – all verification flags
Filters
Pollutant single value drop down
Type of station multiple values drop down
Type of area multiple values drop down
Zone if possible; multiple values drop down
Default (landing page)
Map: PM10 (time shown: latest hour – 24)
Graph: blank
Filters: on “all”
Pollutant navigation
Map: must be displayed even if no data due to filters selection (if not possible, display warning “no data available”)
Graph: reset to blank
Filters station and area: no reset
Time: no reset
Time navigation
Time slider instead of time list (left = past | right = present)
Time player if possible
Synchronisation map – graph
Sampling points selected on map in graph
In graph last value (time) is the value (time) shown in map
Same content of sampling point popup windows in map and graph
Download
In map, values corresponding to the selected time for all selected sampling points selected
In graph, all values over the period of time and for all time series shown
Help page
Include access to help page

2. Graph: all values over the period for all selected sampling points
Download:
Map: all selected series for the time shown (and not the latest value as at present)
Graph: all values over the period for all selected sampling points
Indicate pollutant, date, time and data type (« hourly values/daily mean values »)
Ex: PM10 | | 13:00 | Hourly values
PM10 | | Daily mean values
Title:
TBD
Add PM2.5
Clean pollutant name: delete «(air)»
Date and hour
Pollutant
Value
Station classification
Area classification
Altitude
Station code
Station name
Sampling point code
Zone
Include access to help page (to be written by ACC1)
Only hourly (daily mean) data
Filter not necessary
Replace with time slider
Left = past |right = present
Include time player if possible
should be « time »
Include filters on station type and area type (drop down, multiple choice)

3. if 1 station: station code | station name
Title:
if 1 station: station code | station name
if more than 1 station: « all selected stations)
All same dot siza
Same content as on map
Disclaimer:
To be written by ACC1