1. Maps!

2. Representing Earth’s Surface
Latitude and longitude are lines on the globe that are used to determine location.
Latitude is distance north or south of the equator, measured in degrees. Lines run East to West
Longitude is distance east or west of the prime meridian, measured in degrees. Lines run North to South

3. Maps and Mapmaking
No matter what kind of map is made, some portion of the surface will always look either too small, too big, or out of place. Mapmakers have, however, found ways to limit the distortion of shape, size, distance and direction.

4. Types of maps Mercator Projection Map
Lines of lat and long are parallel
Map is rectangular
Shows directions accurately
Sizes and Distances distorted

5. Types of maps Robinson Projection Map One of the most widely used
Shows most distances, sizes and shapes accurately
Distortions in areas around the edges of map (e.g. Greenland)

6. Types of maps Conical Projection Map
Made by wrapping a cone of paper around a globe at a particular line of latitude
Various points and lines projected onto paper
Almost no distortion along the line of latitude that is in contact with the cone
Accuracy is great over a small area
Used to make road maps and weather maps

7. Types of maps Gnonomic Projection Map
Made by placing a piece of paper on a globe so that it touches a single point on the globe’s surface
Distances and directions distorted
Useful to sailors because show great accuracy the shortest distance between two points

8. Types of Maps Geologic Maps
Geological maps show the different types of rocks in an area
Each color=different rock
Contour maps are often included

9. Topographic Maps

10. What is a Topographic Map?
In contrast to most maps, a topographic map shows the shape of the Earth’s surface by using contour lines.

11. Contours are imaginary lines that join points of equal elevation above or below sea level.

12. Topographic Maps
Contour lines are lines on a topographic map that indicate an elevation.
The closer the lines, the steeper the slope
Contour lines NEVER touch or cross

13. Other Topographic Terms
Map scale – compares distances on the map with distances on earth.
Legend – explains symbols used on the map.
Index contours – contour lines that are labeled to help you find the contour interval.

14. What is a contour interval?
A contour interval is the difference in elevation between two contour lines that are side by side.
Remember that a contour interval is not the distance between the two lines – to get the distance you need to use the map scale.

15. What if my contour lines are close together?
If the contour lines are close together, then that indicates that area has a steep slope.

16. What if my contour lines are far apart?
If the contour lines are far apart, then that indicates the land has a gentle slope (low slope).

17. What do the dark colored contour lines mean?
The dark colored contour lines represent every fifth contour line to make it easier to read the map.

18. What do depressions in the map look like?
A depression, such as the inside of a dead volcano, is represented by Hachure lines.
Hachure lines are regular contour lines with small segments sticking out from it.
The first hachure line is at the same elevation as the contour line before it.

19. More on Contour Lines
Contour lines form V’s that point upstream when they cross a stream.
It is important to remember that they point in the opposite direction as the flow of water.

20. What do the colors on the topographic map represent?
Blue lines/shapes - represent water features, such as streams and lakes.
Brown – contour lines
Black – Roads, buildings, railroads, other man made objects.
Green – Woodland areas
Red - Highways

21. Now that I know what a topographic map is, how do I read it?
First determine the contour interval (the distance between each contour line)
Then determine the map scale (usually at the bottom of the map)
Identify any hills or depressions
Use the legend to identify man made features.

22. Reading a topographic map cont.
Look for areas where the contour lines are close together – they indicate a steep area.
Look for areas where the contour lines are spread apart – they indicate a gentle slope.

23. Let’s take a walk up a hill!

24. We’re now at an elevation of 100 meters.

25. Let’s keep going!
100m

26. Now we’re at 200m.
200m
100m

27. Shall we march on?
200m
100m

28. We’ve made it to 300m!
300m
200m
100m

29. On to the peak!
300m
200m
100m

30. We’re on the peak, but what’s our elevation?
300m
200m
100m

31. Let’s add contour lines for every 50 meters and see if that helps.
Any ideas?
Let’s add contour lines for every 50 meters and see if that helps.
300m
200m
100m

32. We know that we are above 350m, but less than 400m.

33. Let’s head down the hill, it’s getting late!
350m
300m
250m
200m
150m
100m
50m

34. Now what’s our elevation?
If you said somewhere between 200m and 250m you are right!
350m
300m
250m
200m
150m
100m
50m

35. Let’s try this again!
350m
300m
250m
200m
150m
100m
50m

36. What’s our elevation now?
If you said 50m or just under, you’re right!
350m
300m
250m
200m
150m
100m
50m

37. Let’s now look at the same hill, but the way we might see it from an airplane!

38. Each color change represents a 50 meter increase.

39. Now, let’s try the same hike! Our elevation is 0 meters.

40. Now what is our elevation?

41. If you said more than 150 meters, but less than 200 meters your right!

42. Let’s go a little higher.

43. Think you know our elevation now?
More than 300meters
But less than 350meters

44. If we were standing on the peak, what would be our elevation?
More than 350 meters, less than 400 meters

45. Let’s head down hill.

46. Know our elevation?

47. More than 100 meters,
less than 150 meters

48. I think you got it!

49. Let’s see what you know. E C D B
1200m F
1000m A
800m
400m
600m

50. Quiz Time
Use your notes to write your answers to the following questions.
Ready?

51. 1. Could the elevation at the peak (B) be 1410 meters?F
1000m A
800m
400m
600m

52. 2. What is the elevation at (E)?C D B
1200m F
1000m A
800m
400m
600m

53. 3.What is the elevation difference between (A) and (B)?
1200m F
1000m A
800m
400m
600m

54. 4. Could the elevation at (F) be 417 meters?

55. 5. If you walked a straight line from (D) to (C) would you walk over a ridge or down a valley?B
1200m F
1000m A
800m
400m
600m

56. 6.Just looking at the map, would it be easier to head down from the peak going East, or going North?C D B W E
1200m F
1000m A
800m
400m
600m S

57. 1. No :The elevation must be under 1400 meters, but over 1300 meters.
Answers!
1. No :The elevation must be under 1400 meters, but over 1300 meters.
2. about 400 meters

58. Answers!
3. (A) is probably close to the 750 meter line, (B) is above 1300 meters. The difference between the two would probably be 600 to 700 meters.

59. 4. No: It must be more than 700 meters and less than 800 meters.
Answers!
4. No: It must be more than 700 meters and less than 800 meters.
5. Down a valley: If the contour lines point up the slope it’s a valley, if they point down the slope it’s a ridge.

60. Answers!
6. East: When contour lines are close together that means there is a steep slope, the further apart the lines, the more gentile the slope and therefore an easier walk! Go east!