1. SikaGrout®-334 summary
Sika NEDERLAND

2. E SikaGrout® -3 4 The Environment E E E E E E E E E E E
Taking Responsibility E
For a sustainable future E
SikaGrout® -3 4 E
The first two products to be launched will be SikaGrout-334 from Sika Austria (Q4-2013) and SikaGrout-234 from Sika France (Q1-2014)
De eerste twee producten die zullen worden gelanceerd zijn SikaGrout-334 (Sika Oostenrijk (Q4-2013) en SikaGrout-234 (Sika Frankrijk (Q1-2014)
The middle number in the 3-digits will now indicate the SikaGrout has improved sustainability characteristics, demonstrated by an LCA.
Het middelste getal in de 3-cijfers geeft aan dat de SikaGrout verbeterde duurzaamheidskenmerken heeft, aangetoond door een LCA.
The sustainabilty characteristics will be communicated on fact sheet which can be down loaded via a QR code on the packaging or PDS.
De duurzaamheidskenmerken staan vermeld in een factsheet die via een QR-code op de verpakking of de PDS geladen kan worden.

3. Sika sustainable solutions FACING THE CHALLENGE
A positive 3 for the future:
The main characteristic of SikaGrout®-334 is the significant reduction of Portland cement which is estimated to generate approximately one tonne of carbon dioxide per produced tonne. In direct comparison to an equivalent performing SikaGrout® product, reducing the amount of Portland
cement in SikaGrout®-334 by 28 % has demonstrated the following benefits: 3
~12% reduction in primary energy demand
~17% reduction in carbon dioxide emissions
~16% reduction in summer smog
SikaGrout®
The first product to be launched by Sika Austria will be the SikaGrout-334 and contains 28 % supplementary cement material (SCM)
In comparison to an equivalent 300 series product from the same production (i.e. SikaGrout-316), SikaGrout-334 is demonstrated, when comparing raw materials, transportation and production in a Life Cycle Assessment, to reduce the following
The primary energy demand by 12 %
The carbon dioxide emission by 17 %
The summer smog contribution by 16 %
The performances of a 300 series SikaGrout are maintained
Het eerste product dat door Sika Oostenrijk wordt gelanceerd is de SikaGrout-334 en bevat 28% alternatief materiaal voor cement.
in vergelijking met een gelijkwaardig product van de 300-serie (bijv. SikaGrout-316), zijn voor SikaGrout 334 de volgende reducties aangetoond (kijkend naar grondstoffen, transport en productie):
de primaire energie eisen 12%
de CO2-uitstoot 17%
de zomer smog bijdrage 16%
De prestaties van een 300-serie SikaGrout zijn hetzelfde gebleven.
Comparision to an equivalent SikaGrout product

4. Sika sustainable solutions environmental benefits
The new SikaGrout aims to be more sustainable
compared to an existing equivalent SikaGrout product
By;
Using waste materials like fly ash or slag
To;
Reduce the disposal of waste to landfills
Which;
Alleviates demand for Portland cement
With the benefit to improve the Carbon Footprint by decreasing CO2 Emissions
SikaGrout-334 aims to show the sustainability benefits in a credible way.
This is achieved with the reduction of the binder material, Portland cement. Portland cement is estimated to produce 0.8 – 1.0 kg of CO2 per 1.0 kg of produced cement.
By reducing the amount of Portland cement in SikaGrout we can reduce the carbon footprint.
Furthermore, using a supplementary cement material (SCM) such as fly ash or slag to repalce Portland cement, Sika is finding a use for waste material which may normally be disposed of in a landfill or other.

5. Sika sustainable solutions decreasing CO2 Emissions
Verkoop in aantal kg’s van gietmortels
waar SikaGrout-334 een alternatief op kan zijn:
Gietmortels hebben een water/cement factor van 0,5 kg
Aan een zak van 25 kg moet ca. 3 ltr water worden toegevoegd
Dit geeft aan dat er ca. 6 kg cement zit in 1 zak
1.000 kg gietmortel bevat 240 kg cement
kg gietmortel bevat kg cement
Reductie cement bij SikaGrout-334 is 28% t.o.v. vergelijkbare gietmortels
28% van kg cement is kg cement
kg cement staat gelijk aan 14 ton lagere Co2 uitstoot.
(zie duurzaamheidsbewijs)

6. Sika sustainable solutions customer benefits
Possible credit points
Low heat generation, for thick applications
Wide range of application thickness
CE Marked (for European market)
Fast strength development
Maintained high flow for long time
Sika’s support and advice
What are the customer benefits

7. High Performance Expanding Low Shrinkage Pouring Mortar with Reduced Carbon Footprint
Description
A 1-component, ready to mix, free flowing, expanding, low shrinkage pouring mortar containing recycled waste materials to reduce the carbon footprint
Uses
Suitable for precision grouting of for layer thickness between 10 mm to 125 mm:
Heavy equipment / machine bases
Base plates
Dowling reinforcing bars
Bedding joints in pre-cast concrete sections
Filling cavities, voids, gaps and recesses
Sealing around penetrations
Post fixings
Characteristics
Compared to an equivalent performing SikaGrout®
Reduced Carbon Footprint
Good flow characteristics, even after 45 minute
Shrinkage compensated
No segregation or bleeding
Fast 1 day strength development
High final strength
High thickness application
Can be pumped or poured

8. 1.0 Sustainability
1.1 The Life cycle assessment
1.2 impact categories

9. 1.1 The Life Cycle assessment Building trust
To compare inputs, outputs and potential environmental impacts of products and services over a life cycle
Standards ISO and EN 15804
Impact assessment methodology CML 2001*
Uses public and actual data
Ecoinvent, PE-GaBi
European Reference Life Cycle Database
Sika productions
* Institute Environmental Sciences, Leiden NL
Centrum voor Milieuwetenschappen Leiden NL

10. 1.2 impact categories three main impacts
Cumulative Energy Demand (CED)
Amount of primary energy from renewable and non-renewable resources
Global Warming Potential (GWP)
Climate change due to greenhouse gas emissions
Photochemical Ozone Creation Potential (POCP) Ozone induced by sunlight on volatile organic compounds (VOC) and nitrous oxides (NOx)

11. 2.0 Communication 2.1 Packaging 2.2 sustainability FACTSHEET
2.3 PRODUCT DATA SHEET
2.4 MEDIA

12. 2.1 Communicating sustainability QR Code
The new Corporate Identity packing is not yet available therefore we use the old style distributuion bags.
A QR code will lead the customer to a product sustainabilty factsheet.
Countries domesticating a formulation or developing a sustainable SikaGrout will be responsible for their QR code and factsheet (based on the template)
If the language is not available on the QR code for SikaGrout-334 or SikaGrout-234, then the local Sika will be responsible for translating the factsheet and adding it to the list (with Corporate Marketing support)

13. 2.2 sustainability FACTSHEET
Factsheet is structured to demonstrate:
The features
The advantages
The benefits
The proof!
The sustainability factsheet is structured to show
The product features
The advantages
The benefits
And the proof!
The Sika Organisation is responsibile for translation of the factsheet into their local language (EN, FR, DE and ES are currently available fior SikaGrout-334 (Austria))
22/09/2018
Sustainable SikaGrout Solutions

14. 2.3 Product Data Sheet The QR code will also be shown on the PDS
22/09/2018
Sustainable SikaGrout Solutions

15. 2.4 media Website Sika Nederland Sika Nieuws (Intern) Bouwgids
22/09/2018
SikaGrout-334 technical presentation/ for local translation and adaptation

16. 3.4 media Sika Bestekboek (Architecten) www.nbd-online.nl
(Nederlandse Bouw Documentatie)
Raab Karcher Productnieuws
Sika Magazine (Extern)

17. E
Let’s go together for the positive