Presentation is loading. Please wait.

Presentation is loading. Please wait.

Effective Methods to Identify the Damaged Intake Manifold Gasket

Similar presentations


Presentation on theme: "Effective Methods to Identify the Damaged Intake Manifold Gasket "— Presentation transcript:

1 Effective Methods to Identify the Damaged Intake Manifold Gasket Effective Methods to Identify the Damaged Intake Manifold Gasket

2 The gasket is referred to be a seal that was placed in between the cylinder head and the isntake manifold to provide a seal.

3 The seal of the intake manifold gaskets are made from paper, metal, rubber and the combination of all of them.

4 As it is responsible for delivering the mixture of fuel and air to the cylinder in your car.

5 When the intake manifold gaskets of your car got damaged then it unable to seal these two components properly and create major issues.

6 Below points help you to identify the damaged intake manifold gaskets of your car:-  Engine suspended  Leakage in coolant  Engine overheated  Difficulty in acceleration  Low fuel mileage

7 Engine suspended  Due to the damaged intake manifold gasket when your car engine stops turning, it will be suspended eventually.  The causes of these situations are the vacuum leak that can mess up the ratio of air to the fuel and experience engine suspend while driving.  When you find a suspended engine in your car, it's better to go to a mechanic and verify that the issues related to the gasket or not.

8 Leakage in coolant  In some of the cars, the intake manifold gaskets also serve as a seal for the coolant of the engine.  If the intake manifold gaskets of your car are damaged then the coolant fluid will seep through the seal and leak out.  When the coolant is leaking you will smell a distinct odor of coolant in the cabin and also see the steam and puddles of coolant under the car.

9 Engine overheated  The continuation of coolant leaking issues in your car can cause overheating of your engine eventually.  If the damaged intake gasket has caused coolant leaks in your car, then the coolant is getting into the intake manifold and create engine overheating.  Many cases in the engine overheating you may not even see any visible leaks coming from your car, you can recognize it through your car dashboard.

10 Difficulty in acceleration  Aside from the engine suspended, you also experience difficulty in the acceleration of your car after you step on the gas pedal.  You may need to apply little bit power at first to stop the acceleration and start again when you keep your foot on the pedal.  In this conditions, you won't be able to drive your car and definitely need to replace the intake manifold gasket of your car promptly.

11 Low fuel mileage  The damaged intake manifold gasket also causes the disruption in the air to fuel ratio, so that your engine will consume more fuel than normal.  In this way, you will need to spend more money on fuel for maintaining the same amount of driving that you normally desired.  As a result due to the faulty intake manifold gasket the fuel economy of your car will decrease greatly.

12 Conclusio n

13 The intake manifold gaskets are not recommended to remove and replace unless a trained mechanic is performing the repair task.

14 If you feel that the intake manifold gasket of your car is damaged then take it to a reputed professional technician for replacement.

15 https://www.revolutionautomotiveservices.com/


Download ppt "Effective Methods to Identify the Damaged Intake Manifold Gasket "

Similar presentations


Ads by Google