1. How To Fix An Old Or Clogged Ink Cartridge In Xerox Printer In Cheap Way WATER METHOD

2. GO TO THE SINK AND GET HOT WATER

3. ENSURE YOUR PRINTER IS PLUGGED IN AND YOUR LAPTOP HAS THE PRINTER DRIVERS INSTALLED.

4. OPEN THE PRINTER UP TO REVEAL THE INK CARTRIDGES.

5. TAKE OUT THE BLACK INK CARTRIDGE

6. TAKE THE CARTRIDGE TO THE SINK AND PLACED IT DOWN AT THE NEWSPAPER OR PAPER TOWELS

7. WAIT UNTIL TO THE HOT WATER

8. Turn on the sink and wait until you can get very hot water

9. LET THE SINK FILL WITH HOT WATER, BUT ONLY A LITTLE BIT.

10. PLACE THE CARTRIDGE IN THE SINK SO THE PART WHERE THE INK COMES OUT IS IN THE WATER.

11. IF INK COMES OUT IMMEDIATELY THEN YOUR CARTRIDGE ISN'T TERRIBLY CLOGGED

12. DRY OFF THE CARTRIDGE AND PUT IT IN THE PRINTER AND GET IT A TEST RUN

13. Xerox Printer Service Center NZ Xerox Printer Service Center NZ For More Information Contact 092805551 Thanks