1. How Mould Release Agent Can Be Used By Ghanim Trading LLC

2. ★ Release agents should always be performed before the reinforcement. It is used to reduce the likelihood of inadvertently applying it to the reinforcement. ★ Whenever you apply the release agent, it’s advisable to read manufacturer’s instructions. It’s also not good to use a high amount of release agents. ★ Always choose an experienced person who can guide you about the number of release agents.

3. Here are some effective use of mould release agent ●SPRAYING ●SWABBING AND PAINTING ●WIPING ●DIPPING

4. 1. SPRAYING 1. Spraying is one of the most efficient methods. When you want to apply for the release, keep the wand moving 2. For thinnest and most accurate cover, broad nozzle flat spray is used.

5. 2. SWABBING AND PAINTING 1. To swab and paint by hand is an acceptable application method, with the advantage of eradicating the majority of airborne particulate. 2. There is a negative side as well, the applications tend to be thicker than a requirement, leading to wasted material and potential for additional problems.

6. 3. WIPING 1. For difficult architectural precasters with the blemish-free surface, wiping is generally a method of choice. 2. By using release agents on a sponge or rag will normally result in the thinnest coating. This is just a labor-intensive work

7. 4. DIPPING 1. Automated dipping system is the best option. It’s fast as well as labor efficient. 2. The material waste is also less in this method because the excess material will generally drip back into a holding tank. You will get thicker application coat.

8. ★ With the help of these agents, you can make the work easy as well as accurate. ★ If you are looking for standard quality release agents in UAE, check your nearby areas. ★ You will find plenty of options. Choose Ghanim Trading LLC, the most affordable one who can provide you good quality mould release agent in UAE

9. Contact Us Ghanim Trading LLC Call : +971-4-282-1100 Visit : www.ghanimtradinguae.com