Presentation is loading. Please wait.

Presentation is loading. Please wait.

WELCOME TO Via Chemical. ABOUT US Including CPE, HCPE we have capability to produce CPVC resin is polymer material obtained from chlorination modification.

Published byVia Chemical Modified over 6 years ago

Similar presentations

Presentation on theme: "WELCOME TO Via Chemical. ABOUT US Including CPE, HCPE we have capability to produce CPVC resin is polymer material obtained from chlorination modification."— Presentation transcript:

1 WELCOME TO Via Chemical

2 ABOUT US Including CPE, HCPE we have capability to produce CPVC resin is polymer material obtained from chlorination modification with polyvinyl chloride PVC - resin

3 CPE VIA Chemical Chlorinated Polyethylene CPE resin can be classified as CPE for plastic impact modification and CM for rubber.

4 CPVC Resin CPVC resin is a polymer material obtained from chlorination modification with polyvinyl chloride (PVC) resin. VIA Chemical CPVC resin can be classified as extrusion grade and injection grade according to the K-value of PVC and chlorine content.

5 CPE Rubber and Modifier According to its application, VIA Chemical CPE resin can be classified as CPE for plastic impact modification and CM for rubber.

6 Commercial Electrical Contracto HCPE HCPE is a high-molecular polymer obtained after substantial PE chlorination. VIA Chemical HCPE resin can be made into high viscosity, moderate viscosity, and low viscosity HCPE according to the PE molecular weight and difference of chlorination processes.

7 Thanks for Watching http://viachemical.com/

Download ppt "WELCOME TO Via Chemical. ABOUT US Including CPE, HCPE we have capability to produce CPVC resin is polymer material obtained from chlorination modification."

Similar presentations

2008 International Lubricants and Waxes Meeting NPRA International Lubricants and Waxes Meeting Session LW-08-106.

2008 International Lubricants and Waxes Meeting NPRA International Lubricants and Waxes Meeting Session LW
Introduction to Engineering Plastics. During this unit we will review: Classifications of Plastics, Characteristics of thermoplastics, Definitions of.

Introduction to Engineering Plastics. During this unit we will review: Classifications of Plastics, Characteristics of thermoplastics, Definitions of.
Lecture # 9 Polymer structure Characteristic ,Applications and processing of polymers Learning objectives: 1- Describe a typical polymer molecule in terms.

Lecture # 9 Polymer structure Characteristic ,Applications and processing of polymers Learning objectives: 1- Describe a typical polymer molecule in terms.
Plastics and their uses

Plastics and their uses
1 Chemistry for Engineering Logistics POLYMERS AND POLYMER MATERIALS 1. Basic Terms in Polymer Chemistry 2. Manufacture of Polymer Products Department.

1 Chemistry for Engineering Logistics POLYMERS AND POLYMER MATERIALS 1. Basic Terms in Polymer Chemistry 2. Manufacture of Polymer Products Department.
1 Chapter 1. Introduction to Molecular Materials “The development of a civilization depends on new materials” Materials Science at the center of a tetrahedron.

1 Chapter 1. Introduction to Molecular Materials “The development of a civilization depends on new materials” Materials Science at the center of a tetrahedron.
Review of Polymers Highlights from MY2100.

Review of Polymers Highlights from MY2100.
Polymers Materials Polymerisation C H O N Cl F S Degree of polymerisation Sources of monomers Si.

Polymers Materials Polymerisation C H O N Cl F S Degree of polymerisation Sources of monomers Si.
 Compared to metals, plastics have lower density, strength, elastic modulus, and thermal and electrical conductivity, and a higher coefficient of thermal.

 Compared to metals, plastics have lower density, strength, elastic modulus, and thermal and electrical conductivity, and a higher coefficient of thermal.
Polymers in Civil Engineering “Poly” “meros” = many parts Monomer = non-linked “mer” material Polymers = long continuous chain molecules formed from repeated.

Polymers in Civil Engineering “Poly” “meros” = many parts Monomer = non-linked “mer” material Polymers = long continuous chain molecules formed from repeated.
PVC (polyvinyl chloride)

PVC (polyvinyl chloride)
Recycling Plastic? D. Moore. Types Of Plastics? Material Percent 1.)Polyethylene Terephthalate (PET) 20-30% 2.)High Density Polyethylene 50-60% 3.)Vinyl/Polyvinyl.

Recycling Plastic? D. Moore. Types Of Plastics? Material Percent 1.)Polyethylene Terephthalate (PET) 20-30% 2.)High Density Polyethylene 50-60% 3.)Vinyl/Polyvinyl.
Understanding the Basics of the IAPD Thermoplastics Rectangle

Understanding the Basics of the IAPD Thermoplastics Rectangle
Weerawat hatthaphonphaisankul 5310755300 Kantapat navanugraha 5310751341.

Weerawat hatthaphonphaisankul Kantapat navanugraha
Plumbing Plastic Pipe Plumbing Systems 20091Plumbing.

Plumbing Plastic Pipe Plumbing Systems 20091Plumbing.
Chemicals from Oil Chemicals from Oil PLASTICS. Plastics When oil is cracked ethene is often made. Ethene is a very useful molecule as it is the starting.

Chemicals from Oil Chemicals from Oil PLASTICS. Plastics When oil is cracked ethene is often made. Ethene is a very useful molecule as it is the starting.
Injection Molded Plastic By: Dan Quates Material science 3344.

Injection Molded Plastic By: Dan Quates Material science 3344.
CHEMISTRY DEPARTMENT WAID ACADEMY Standard Grade Topic 13.

CHEMISTRY DEPARTMENT WAID ACADEMY Standard Grade Topic 13.
POLYVINYL CHLORIDE.

POLYVINYL CHLORIDE.
Polymers Plastics and Fabrics. What’s a Polymer?  Made up of monomers (single unit)  long chains of many monomers (generally 10 or more) are called.

Polymers Plastics and Fabrics. What’s a Polymer?  Made up of monomers (single unit)  long chains of many monomers (generally 10 or more) are called.

Similar presentations

Ads by Google