1. 586-468-8972 nationalheirloombuildings.com National Heirloom Buildings Of Steel Welcome to the National Heirloom Buildings Of Steel Construction Process S L I D E S H O W Telephone

2. Beginning the construction process with the foundation in place and the first steel members laid out. [ 2 OF 19 ] National Heirloom Buildings Of Steel

3. Assemble the X- Braced bay first. Review the instruction manual for various ways to erect frames. [ 3 OF 19 ] National Heirloom Buildings Of Steel

4. Plumb and square the X-Braced bay. Once the first bay is plumb and squared, its just a matter of measuring distance to put the other frames in place. [ 4 OF 19 ] National Heirloom Buildings Of Steel

5. Run a row of purlins down both sides of the peak and another near the eave to tie the frames together. [ 5 OF 19 ] National Heirloom Buildings Of Steel

6. Finish installing the purlins based on the purlin spacing specified by the engineered drawings. [ 6 OF 19 ] National Heirloom Buildings Of Steel

7. Frame all exterior sidewall and endwall girts along with window and door openings. [ 7 OF 19 ] National Heirloom Buildings Of Steel

8. Install the roof insulation and roofing. Our roof fasteners are applied through the high ribs of our roofing sheets. The special threads allow for superior performance against leaking. [ 8 OF 19 ] National Heirloom Buildings Of Steel

9. Install all windows and entry doors. Trim them out with trim kits. Its very easy to work with light gauge steel if you have the right tools. Ask our building consultant to include them in your kit. [ 9 OF 19 ] National Heirloom Buildings Of Steel

10. Steel siding is extremely popular. Its strong and requires little maintenance. AND, National Heirloom Buildings Of Steel are simple to finish with other materials to match existing structures too. [ 10 OF 19 ] National Heirloom Buildings Of Steel

11. In a building which includes a mezzanine, the joists must be installed before the endwalls are applied. This is a very clean building system with lots of usable space. [ 11 OF 19 ] National Heirloom Buildings Of Steel

12. Once the mezzanine floor joists are installed and the ends capped, you are ready to place the floor decking. [ 12 OF 19 ] National Heirloom Buildings Of Steel

13. Its back outside to finish installing the endwall sheeting. Various roof pitches require the builder to cut the sheeting angle at the gable. [ 13 OF 19 ] National Heirloom Buildings Of Steel

14. Safety is critical! This is not the OSHA approved method for installing tall sheeting. If you are hiring the work out, check references and for proper licensing, bonding, and insurance coverage. [ 14 OF 19 ] National Heirloom Buildings Of Steel

15. Install trim pieces, outside corners, ridge- caps, and gable flashings. Extended eaves add value and are worth the expense where aesthetics are important. [ 15 OF 19 ] National Heirloom Buildings Of Steel

16. The overhead doors are installed after the opening is framed, trimmed and pre- measured by the installer. Its a good idea to have the installer inspect the opening just after framing. [ 16 OF 19 ] National Heirloom Buildings Of Steel

17. Gutters and down spouts help protect the building. We can supply them or you can have them installed locally. [ 17 OF 19 ] National Heirloom Buildings Of Steel

18. National Heirloom Buildings Of Steel are fully engineered to meet your specific needs. We guarantee strength and beauty that will withstand natures toughest tests. [ 18 OF 19 ] National Heirloom Buildings Of Steel

19. For more information about National Heirloom Buildings Of Steel the most advanced steel building system designs in the world, just contact us at 586-468-8972 or (link to email) (link to email) For more information about National Heirloom Buildings Of Steel the most advanced steel building system designs in the world, just contact us at 586-468-8972 or (link to email) (link to email) [ 19 OF 19 ]