1. Presents

2. Which is the easy & safest way for water Disinfection
Today’s Topic
Which is the easy & safest way for water Disinfection

3. There are many ways to disinfect water.
It can be done by…
Ozone UV
Ionization
Chemicals
Etc.

4. Chemical disinfection1
Chlorine is the most common chemical disinfectant but the question is:
Is disinfection with Chlorine really safe and reliable?

5. This is what you are exposed to:
1.Use of chlorine is carcinogenic in drinking water
(Mutagen X) Harvard Medical/ Barcelona Study 2007.
2. Use of chlorine causes TriHaloMethanes (THM) e.g. chloroform, bromodichloromethane, bromoform bromochloromethane.
3. Use of chlorine causes haloacetic acids (HAA) mono-,di and trichloroacetic acids and mono- and bromoacetic acids.
4. Mutagen X cancer potency is 170 times greater than chloroform.
MX, THM and HAA are linked to cancer, miscarriages, stillbirths and birth defects

6. Other limitations of chlorine
1. Chlorine does not kill ALL micro-organisms in water
2. Chlorine is pH dependant
3. Chlorine is corrosive
4. Chlorine is hazardous to transport, store and use
5. Chlorine does not effectively remove the bio-film & algae.
6. Chlorine generates by-products that are a proven and
permanent risk for human health.

7. Chlorine Dioxide (ClO2) So ClO2 is VERY different from Chlorine!!
It has Chlorine in the name but is NOT Chlorine Compare:
H20 is 2 parts Hydrogen gas and 1 part Oxygen
= Water and NOT Hydrogen nor Oxygen
So ClO2 is VERY different from Chlorine!! 2

8. Facts about “traditional” Chlorine Dioxide:
It is a gas that explodes when in contact with air!
Difficult and dangerous to deliver to water
When delivered to water only 60%-70% pure
The remaining 30%-40% are still dangerous and toxic residues
However:
As such however the BEST disinfectant existing says the WHO
Improved purity and stability make it safer and more effective!

9. Thus to make a safe and clean disinfectant !
What was the challenge?
To develop an innovative and revolutionary new concept that removes all side effects and by-products known from existing disinfectants.
Thus to make a safe and clean disinfectant !

10. If we could make a pure ClO2 solution in water what would that mean?
A sublime disinfection power
No more dangerous by-products
Safe to human and animals
Numerous applications
A revolution in the world of water disinfection

11. Today we present you this revolution
After 8 years of intensive research, scientist were able to generate a pure ClO2 dissolved in water and called it:

12. What is Diamondoxide 1. A very powerful disinfectant
2. A cleaner of Bio-contamination
(Bio-film & Bio-fouling)

13. What is Diamondoxide : The disinfectant
1. A 2-component liquid kit delivering:
99.99% pure 0.75% Chlorine Dioxide solution
2. A powerful oxidising agent of the FULL spectrum of micro-organisms
3. A product with the highest quality standards
4. A proven concept
5. An environmental friendly and 100% SAFE disinfectant.
6. Effective in a broad Ph range (4-10)
7. Easy to use without further big investments

14. What Diamondoxide does
100% effective against all water-borne micro-organisms and spore forming bacteria (Bacteria, Viruses, Protozoa, Fungi, Mould, Parasites, larval eggs, and Sediment) etc.
1 liter disinfects up to 150,000 liters of water
Destroys algae-related taste and odour compounds (No taste, No smell)
When Diamondoxide is applied the end products are a fraction of sodium sulphate (Na2SO4) and sodium chloride (NaCl). These substances are common in water;

15. What Diamondoxide does NOT
Does not chlorinate organic materials; no chlorates, chlorites, chloramines. NO FREE CHLORINES!!!
Does not form THM’s, HAA’s and other organic compounds related to carcinogens (cancer)
No build-up of resistance in target micro-organisms
No residues formed
No corrosion; i.e. of water distribution system, pipes, pumps, filters, domestic/commercial air conditioners, taps, showers, industrial equipment/factories

16. Comparison Facts
Classical Method
Diamondoxide method
Form:
Cl2: gas
NaOCl: liquid
Component A:
Component B:
Stability of Ingredients
Very limited
2 years
Composition of ClO2 solution
Containing Free Chlorine
Containing Chlorate
Containing Chloride
Containing Chlorite
Explosive
No Free Chlorine
No Chlorate
No Chloride
No Chlorite
Non-explosive
Kinetic Half Time >30 days! (in solution form when storage conditions are respected)

17. Kinetic Half Time >30 days!

18. to Disinfection water by
100% Safe
to Disinfection water by

19. What is Bio-film / Bio-fouling
Bio-film is the film of dirt, residues and micro-organisms
in pipes, filters, pumps etc. .

20. Facts about Bio-film 1. Chlorine does NOT remove both layers
2. Chlorine cannot penetrate Bio-film and kill bacteria living in and behind this Bio-film.
3. Chlorine can only corrode the top layer.
4. Chlorine dioxide and Ionization penetrate the Bio-film.
5. Only complete removal of the Bio-film guarantees 100% save water at the tap
6. Chlorine dioxide removes the Bio-film and prevents the growth by a low continuous dosing.

21. Bio-film 21

22. Bio-film
Soft

23. Applications of Diamondoxide
Human Use:
Swine Processing
Drinking water
Meat and milk farms
Municipal water
Meat Processing
Ice cube Industry
Fish and shrimp hatchery
Fish & shrimp Farming Industry
Bio Industry:
Fish and Shrimp Processing
Fruit and Vegetable Processing
Poultry Hatchery
Canning Industry
Poultry Growers
Brewing and Milk Industry
Frozen Foods
Egg Production
Cosmetics Industry
Dairy
Swine farms

24. Industrial Market: Urban & leisure market Horticulture Cooling Towers
Hotels and resorts
Pulp & Paper
Hospitals
Refineries, Pipelines
Condominiums
Irrigation Water
Commercial Building
Well Water
Air Conditioning systems
Waste Water
Swimming Pools and Hot Tubs
Water Parks & Resorts
Domestic Sanitize
Merchant Marine, Navy
Cruise Ships
Horticulture
Commercial Aircraft
Flowers
Irrigation
Car Wash, Train & Truck Wash
Ornamental Fish Aquaria
Injection Water

25. Safe, reliable and simple water Disinfection
How to use it

26. Simple Application Simple instructions Water volume Component A first
Component B second
Wait for 1-5 hours (depending on temperature)
Diamondoxide ready for application

27. Dose/Measure Dosage rates according to your requirement
Simple (standard) dosing equipment and a PE-HD tank;
Residual is measured by DPD Colorimetric Method (DPD 1);
Residual is measured by ORP equipment;
Residual is measured by Chlorine Dioxide Sensor
Thick PE-HD storage tank (black colored).

29. Yield per litter
The dosing capacity of 1 Liter Diamondoxide is calculated as following:
Diamondoxide 0.75% = 7,5 gram ClO2 per liter = 7500 ppm/mg per liter
1 liter of Diamondoxide can disinfect:
at 0.05 ppm dosing= 7500 ppm/0.02 ppm = liter of water.
at 0.10 ppm dosing= 7500 ppm/0.10 ppm = liter of water. or
Volume of water to be disinfected x dosage rate = ClO2
7500 ppm

30. Disinfection by-products
Disinfectant
By-products
Sodium / Calcium Hypochlorite
trihalomethanes (THMs)
haloacetic acids
Haloacetonitriles
haloketones
chloral hydrate
(trichloroacetaldehyde)
Chloropicrin
(trichloronitromethane)
cyanogen chloride
chlorate
chloramines
Mutagen X (MX)
Ozone
bromate
aldehydes
ketones
ketoacids
carboxylic acids
bromoform
“Classic” Chlorine Dioxide
chlorite
chloride
free chlorine
Diamondoxide
none

31. Summary of advantages of Diamondoxide
Long shelf life (2 years guaranteed)
Long stability (kinetic half time of the solution >30 days)
10 x more powerful than Chlorine
No environmental or health issues
No harmful by-products and end-products
Not corrosive when dosed into the water.
Low equipment investment
Easy to dose, easy to control
Kills 100% of water-borne pathogens
Eliminates bio-film and prevents re-growth of bio-film.
Safe to use, store and transport (by truck, plane, boat and train)
On-site production

32. participation of this presentation.
Thank you
for your attention and
participation of this presentation.

33. For details please visit
Marketed by,
For details please visit