1. Analog Room Command Module
Header - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
RS-7000
Stylish flush mount
Analog Room Command Module
Footer - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’

2. RS 7000 Analog Room Command Module Overview
Header - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
RS 7000 Analog Room Command Module Overview
The Hardware platform provides:
RS Analog Room Command module comapible with former and new HVAC Controller
White Version Only
Benefit
Modern design
Large display with Push buttons
Thin profile 14 mm and square 86 x 86 mm design
Flush mount, made to fit EU box
Configurable functions for SKU reduction and easy selection
Combined Temperature and Humidity detection
Consistent design between new generation of Room Sensors
Flush mount European Box
Footer - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
NSA-7000 Room Command Module Resource pages

3. RS 7000 Analog Room Command Module User Interface
Header - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
RS 7000 Analog Room Command Module User Interface
Large Display
Custom Display
40% of the front area
Backlight with time-out
No need of localization
Show Set Point only option
Show Humidity
Set Point limits
Show Units °C or F
Temperature reading offset
Fan Controls
Set Point Control
Depending on model
Easy selection up / down of 0,5 °C
Set Point mode ADJ or W/C configurable
Occupancy
Toggle OCC output
ADJ 12 28 °C
W/C -3 +3
Configurable
Up to 5…35°C
Up to °C
SP MODE
Keypad Lockable
No lock
Lock all keys
Lock all keys except Occupancy
Press and Hold 5 SEC
to configure
Footer - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
NSA-7000 Room Command Module Resource pages

4. RS 7000 Analog Room Command Module Overview
Header - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
RS 7000 Analog Room Command Module Overview
RS 7000 Room Command Module
Designed to be use with former and new HAVC Controller offers analogs output to transmit: Temperature, Setpoint and Fan Speed selection or Humidity.
Main Difference with Current RS-1100:
Flush Mount, low profile with larger a clear display
Combined Temperature and Humidity option
Local configuration via Display and pushbuttons:
Set Point mode: Adjust or Warmer/Cooler
Show Only Setpoint,
Units °C or °F
Locks Push buttons
3 Items codes for many configuration
ADJ 12 28 °C
W/C -3 +3
Configurable
Up to 5…35°C
Up to °C
SP MODE
Footer - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
NSA-7000 Room Command Module Resource pages

5. RS 7000 Analog Room Command Module Item Codes
Header - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
RS 7000 Analog Room Command Module Item Codes RS
Four buttons model RS
Three buttons model
AO1 Temperature
AO2 Set Points
AO3 Fan Speed
DO Occupancy override (*)
AO1 Temperature
AO2 Set Points
AO3 Humidity RH%
DO Occupancy override (*) RS
Specification
Power 15 VDC
Temp range 0…40°C accuracy + 0,5 °C
Humidity % accuracy 3%
Only White finishing
AO1 Temperature
AO2 Humidity RH%
(*) Open Collector, open when occupied
Footer - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
NSA-7000 Room Command Module Resource pages

6. RS 7000 Network Sensors Installation
Header - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
RS Network Sensors Installation
The NSA-7000 can be installed on rounded European boxes using the mounting plate included in the supply. Once installed the devices will cover completely the mounting plate and it will protrude from the wall of 14 mm only. A little screw keeps the device in place.
Footer - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’
NSA-7000 Room Command Module Resource pages

7. RS 7000 Ordering codes Table 1: RS 7000 Room Command Module
Product code
Color1
LCD
Temp
Humidity2
Fan control
Temp.
adjustment3
F/C scale toggle
Occupancy override RS
White No
Yes
Yes (±3%)
N/A RS
Adj/WC RS
Note:
For models with humidity sensor, the humidity value can be displayed in LCD too
Device color white only
Adj/WC means this model can work under Adjust 12 to 28°C or WC (Warmer/Cooler) +3 °C mode, selected in setting.
NSA-7000 Room Command Module Resource pages

8. RS-7000 network sensor Benefit
Large backlit Display in a low profile enclosure
Display larger than 40% of front area, provides real time status of the environment with intuitive and clear user interface
Display helps to meet building policy
Sensors can be configured to show temperature, humidity or set point only, in addition the keypad can be locked to avoid misuse in public spaces.
Flush Mount installation make it stylish
Suitable for various installation boxes, flush mount offer low profile of only 14 mm outside the wall.
Customize colors to meet customer needs
The front panel of the sensor can be white or customized in black or other colors with a minimum quantity.
Mounting plate protection cap
The mounting plate allows installation without opening the sensor. The removable and repositionable protection cap protects the sensor during commissioning or painting.
Both avoid the risk of component damages during installation
Configurable options reduce stock need
Setpoint functionality Adjust or Warmer/Cooler can be configured from the display during the installation.
Combined Temperature and Humidity
Offer best comfort, and Service retrofit opportunity where RS-1100 can be replaced with a more advanced stylish unit.
NSA-7000 Room COmmand Module Resource pages

9. RS-7000 Technical Specification
Supply Voltage
15VDC nominal
Current consumption
35mA maximum
Terminations
Screw terminal block
Wire size
Screw terminal block: AWG ( mm diameter); 22AWG (0.6 mm diameter) recommended
Outputs RS :
Temperature: 0…10 0…40 °C
Humidity : …10 0…100 RH%
Outputs RS :
AO1 Temperature: 0…10 0…40 °C
AO2 Setpoint: … 10 V (*)
AO3 Humidity : …10 0…100 RH%
Occupancy: Open collector Occupied = Contact Open,
Outputs RS :
AO2 Setpoint: … 10 V (*)
AO3 Fan Speed: V
Occupancy: Open collector Occupied = Contact Open,
Mounting
Flush-mounted
Temperature accuracy
±0.5℃ (±1oF)
Humidity accuracy
±3%RH
Default temperature set point adjustment range
Default Adjust Range: °C, max configurable 0 to 40 °C in 0.5 °C increments
Default W/C Range: -3 to +3 °C, max configurable 0 to + 5 °C in 0.5 °C increments
SP adj 12°C = 3 V / 28°C = 7 V -- SP W/C 0°C = 5 V +3°C = 7 / -3°C = 3 V)
Ambient conditions
Operating: 0-40 °C with 10-90% RH, non-condensing
Storage: -20 to 60 °C with 5-95% RH, noncondensing
Shipping weight
Approx. 300g
Compliance
CE mark
RCM mark, Australia/NZ emissions compliance
RoHS, REACH, WEEE
(*) SP adj 12°C = 3 V / 28°C = 7 V -- SP W/C 0°C = 5 V +3°C = 7 / -3°C = 3 V)
Footer - Use 'Insert >Header & Footer' to modify this text and ‘Apply to all’

10. Thank You
NSA-7000 Room COmmand Module Resource pages