1. Marston Bentley Div. Brian Allan Simon McManus
Wm Canning Ltd
Marston Bentley Div.
Brian Allan
Simon McManus

2. Offshore Fluids Presentation
Wm Canning
Production Control Fluids
Exploration Control Fluids
Drilling Mud Additives

3. Wm. Canning
B.S.I. Registered to ISO 9001 for manufacture, delivery and research.
Facilities include the QC lab, R&D lab, Fluids test lab and Hydraulic test lab.

4. Wm Canning Ltd
Manufacturing sites in Wigan, England and Houston Texas.
Storage in Aberdeen, Great Yarmouth, Bergen, Stavanger, Port Elizabeth S. Africa, Rio De Janeiro, Singapore and Perth Australia.

5. Subsea Control Fluids Water and oil based control fluids
Range of freezing points available
High temperature fluids available
All with low viscosity, lubrication, biocidal and anti-corrosion properties

6. Oceanic HW500 Series Subsea Production Control Fluids
OCEANIC HW 500 FLUIDS HAVE BEEN THE MARKET LEADER FOR OVER 15 YEARS.
OCEANIC HW540 WITH 40% MEG LEADS IN THE NORTH SEA AND COLDER CLIMATES WITH HW525 CONTAINING 25% MEG LEADING IN THE GULF OF MEXICO AND WARMER CLIMATES.

7. Oceanic HW500 Series Subsea Production Control Fluids
Low Viscosity
Corrosion Protection
Biocidal Protection
Excellent Lubrication
Working in over 200 projects

8. Oceanic HW 443 SUBSEA PRODUCTION CONTROL FLUID
Has all the properties required by a Subsea Control Fluid +.
For Temperatures up up to 145 deg C .
More Environmentally Acceptable.
Contains a Vapour phase Inhibitor.
Contains a leak tracing dye.

9. Oceanic HW600 Range Best environmental fluid ever produced.
Upper temperature limit at least 180°c.
lubrication as good as Oceanic HW540.
Range of pour points available.
Leak Tracing Dye
VPI.

10. Falex Lubricant Test

11. Oceanic HW640 Falex Testing

12. Oceanic HW 540 Falex Testing 0 to 2500lb load with no breakdown

13. Competitor Fluid Falex Testing Fail at 600lb

14. Environmental Testing
FULL HOCNF INFORMATION AVAILABLE IN LINE WITH PARCOM.
443 AND 625 ARE THE LEAST TOXIC CONTROL FLUID KNOWN.
SFT AND THE DTI THROUGH THE OCNS ALLOWS DISCHARGE OF ALL THE OCEANIC FLUIDS.

15. Environmental Testing

16. Vapour Phase Testing
COMPETITOR OCEANIC HW 443
or HW625

17. Oceanic HW 443 GOOD LUBRICANT RESISTS MICRO-ORGANISMS
PREVENTS CORROSION IN LIQUID AND IN AIR GAPS.
EXTREMELY LOW TOXICITY
HIGH TEMPERATURE
PROVEN TRACK RECORD.

18. Oceanic BTC 491 SYNTHETIC HYDROCARBON
PROVEN IN VALVE TESTING TO 176°c AT psi
PROVEN IN THE LABORATORY TO 200°c
EXCELLENT LUBRICANT
COMPATIBLE WITH ALL OTHER HYDROCARBONS ON THE MARKET.

19. Exploration Products BOP control fluid concentrates.
Motion Compensator Hydraulic Fluids
Drilling Mud Additives

20. Erifon HD 856 100:1 BOP Fluid Concentrate.
Workhorse of the industry for over 15 years
Used by all major drilling contractors and equipment suppliers
Excellent track record
Market leader world-wide

21. Erifon HD 2000 All the properties of Erifon HD 856
Developed for use where water and ambient temperatures promote the growth of bacteria and fungus.

22. Erifon HD603 Again it has all the properties in Erifon HD856
Developed to meet current and future environmental regulations

23. Erifon Pilot Line Fluid
Developed to prevent poor water and mixing damaging the pilot line system
Ready to use
Increases reliability

24. Erifon 818 Motion Compensator Fluid. Market leader for over 15 years
First water-based fluid to replace old phosphate ester fluids
excellent track record

25. Erifon 818L Low viscosity version of Standard Erifon 818
Developed in conjunction with a major motion compensator manufacturer.
For use in cold climates

26. Erifon 818TLP
Added high pressure lubrication for Tension Leg Platforms
Required due to higher loads and different types of motion
Developed in conjunction with a major motion compensator manufacturer

27. Drilling Mud Additives
Lo-Tork Products used all over the world.
Lo-Tork Envirolube for ecological sensitive areas.
Wm Canning are leading the R&D for silicate muds and wireline lubrication.