2. Click a hyperlink to view the corresponding slides.
Chapter Menu
Section 8.1 Main Group Elements
Section 8.2 Transition Elements
Click a hyperlink to view the corresponding slides.
Chapter Menu

3. Main Group Elements
Relate the position of main group elements on the periodic table to their electron configurations.
Predict the chemical behaviors of the main group elements.
Relate chemical behavior to electron configuration and atomic size.
Section 8.1

4. Main Group Elements
inner transition element: one of the elements in the actinide or lanthanide series
Section 8.1

5. Main Group Elements alkali metal alkaline earth metal halogen
For the main group elements, both metallic character and atomic radius decrease from left to right across a period.
Section 8.1

6. Patterns of Behavior of Main Group Elements
Elements in the same group have similar properties because they have the same number of valence electrons.
Elements in the same period have different properties because the number of valence electrons increases as you move from left to right in the row of the periodic table.
Section 8.1

7. Patterns of Behavior of Main Group Elements (cont.)
Section 8.1

8. Patterns of Behavior of Main Group Elements (cont.)
Atomic radius is defined as one-half the distance between the nuclei of two identical atoms when those atoms are bonded together.
With each increase in nuclear charge across the period, the outer electrons are attracted more strongly toward the nucleus, resulting in smaller atomic size.
Section 8.1

9. Patterns of Behavior of Main Group Elements (cont.)
Section 8.1

10. Patterns of Behavior of Main Group Elements (cont.)
Section 8.1

11. Patterns of Behavior of Main Group Elements (cont.)
Atomic size is an important factor in the chemical reactivity of an element.
Ionic size is also important in determining how ions behave in solution and the structure of solid ionic compounds.
Section 8.1

12. Patterns of Behavior of Main Group Elements (cont.)
Section 8.1

13. Patterns of Behavior of Main Group Elements (cont.)
Electrons that are not lost experience a greater attraction to the nucleus and pull together in a tighter bundle with a smaller radius.
When an electron is added, the charge on the nucleus is not great enough to hold the increased number of electrons as closely as it holds the electrons in the neutral atom.
Section 8.1

14. Patterns of Behavior of Main Group Elements (cont.)
Section 8.1

15. Patterns of Behavior of Main Group Elements (cont.)
Ionic radii decrease because nuclear charge increases.
Section 8.1

16. Patterns of Behavior of Main Group Elements (cont.)
Elements tend to react in ways that allow them to achieve the configuration of the nearest noble gas.
Section 8.1

17. The Main Group Metals and Nonmetals
Group 1 elements are called the alkali metals.
They lose their s valence electron and form a 1+ ion with the stable electron configuration of the noble gas in the preceding period.
The most reactive alkali metal is the one that has the least attraction for this electron.
Section 8.1

18. The Main Group Metals and Nonmetals (cont.)
Group 2 elements are called the alkaline earth metals.
They lose their s valence electrons and form a 2+ ion with the stable electron configuration of the noble gas in the preceding period.
Group 2 elements are less reactive than group 1 elements because they lose 2 electrons.
Section 8.1

19. The Main Group Metals and Nonmetals (cont.)
Group 13 elements
tend to share electrons in covalent compounds rather than form ionic compounds
Their valence configuration is s2p1, and they exhibit the 3+ oxidation number in most of their compounds.
Section 8.1

20. The Main Group Metals and Nonmetals (cont.)
Aluminum is the most abundant metallic element in Earth’s crust.
Unlike the other group 13 elements, boron is a metalloid.
Section 8.1

21. The Main Group Metals and Nonmetals (cont.)
Group 14 elements
usually share electrons rather than lose electrons to achieve a noble gas configuration
Their valence configuration is s2p2, and they exhibit the 4+ oxidation number in most of their compounds.
Section 8.1

22. The Main Group Metals and Nonmetals (cont.)
Group 15 elements
form covalent bonds to achieve noble gas configuration
Their valence configuration is s2p3.
Section 8.1

23. The Main Group Metals and Nonmetals (cont.)
Group 16 elements
form covalent bonds to achieve noble gas configuration
Their valence configuration is s2p4.
Both metals and nonmetals react directly with molecular oxygen to form oxides.
Section 8.1

24. The Main Group Metals and Nonmetals (cont.)
Section 8.1

25. The Main Group Metals and Nonmetals (cont.)
Group 17 elements are called halogens.
active nonmetals that don’t exist freely in nature
Their valence configuration is s2p5.
form –1 ion with a noble gas configuration
Section 8.1

26. The Main Group Metals and Nonmetals (cont.)
Because the halogens react by gaining an electron, the most reactive element in the group is the one with strongest attraction for an electron.
Section 8.1

27. The Main Group Metals and Nonmetals (cont.)
Group 18 elements are the noble gases.
no tendency to lose or gain electrons
lack of reactivity
Section 8.1

28. Section Assessment
Atomic radius is defined as ___ the distance between the nuclei of two identical atoms when those atoms are bonded together.
A. one-fourth
B. one-half
C. twice
D. three-fourths
Section 8.1

29. Section Assessment
Elements in the same period have similar properties because they have the same number of valence electrons.
A. true
B. false
Section 8.1

30. End of Section 8.1

31. Transition Elements
Relate the chemical and physical properties of the transition elements to their electron configurations.
Predict the chemical behavior of transition elements from their positions in the periodic table.
Section 8.2

32. Transition Elements
halogen: an element from group 17 (F, CI, Br, I, and At) that reacts with metals to form salts
The properties of the transition elements result from electrons filling d orbitals; for the inner transition elements, electrons fill f orbitals.
Section 8.2

33. Trends in Properties
Each of the transition elements has its own properties that result from its atomic structure.
With the exception of the group 12 elements, the transition metals have higher melting points and boiling points.
Section 8.2

34. Trends in Properties (cont.)
There is a wide range of oxidation numbers within the transition elements due to the involvement of the d electrons in chemical bonding.
The changes in atomic radii for the transition elements are not as great as the changes for the main group elements.
Section 8.2

35. Other Transition Elements: A Variety of Uses
Iron, cobalt, and nickel have nearly identical atomic radii, similar chemical properties, and are known as the iron triad.
Section 8.2

36. Other Transition Elements: A Variety of Uses (cont.)
The platinum group includes ruthenium, rhodium, palladium, osmium, iridium, and platinum. They are used as catalysts to speed up chemical reactions.
Section 8.2

37. Other Transition Elements: A Variety of Uses (cont.)
The coinage metals are copper, silver, and gold. They are malleable, relatively unreactive, and in the case of silver and gold, rare.
Section 8.2

38. Other Transition Elements: A Variety of Uses (cont.)
Chromium and zinc are corrosion-resistant metals that are often alloyed with other metals to protect them.
Section 8.2

39. Other Transition Elements: A Variety of Uses (cont.)
Section 8.2

40. Lanthanides and Actinides: The Inner Transition Elements
The inner transition elements are found in the f block of the periodic table.
In the lanthanides, electrons of highest energy are in the 4f sublevel.
Section 8.2

41. Lanthanides and Actinides: The Inner Transition Elements (cont.)
In the actinides, electrons of highest energy are in the 5f sublevel.
Cerium is the most abundant lanthanide and used to make the flints for lighters.
The actinide uranium is a naturally occurring, radioactive element used as a source of nuclear fuel and other radioactive elements.
Section 8.2

42. Section Assessment
Which element is the most abundant lanthanide that is used to make flints for lighters?
A. cerium
B. uranium
C. plutonium
D. terbium
Section 8.2

43. Section Assessment
Which element is often used to prevent metals from corroding?
A. nickel
B. platinum
C. chromium
D. iron
Section 8.2

44. End of Section 8.2

45. Standardized Test Practice Image Bank Concepts in Motion
Chemistry Online
Study Guide
Chapter Assessment
Standardized Test Practice
Image Bank
Concepts in Motion
Resources Menu

46. Key Concepts
In a period of the periodic table, the number of valence electrons increases as atomic number increases.
From left to right across a period, atomic radius decreases. Down a group, atomic radius increases.
The metal with the biggest atom and smallest number of valence electrons is the most active metal.
The nonmetal with the smallest atom and greatest number of valence electrons is the most active nonmetal.
Study Guide 1

47. Transition elements form the d block of the periodic table.
Key Concepts
Transition elements form the d block of the periodic table.
Multiple oxidation states are characteristic of transition elements.
Transition elements with similar atomic radii often have similar chemical properties. The iron triad, platinum group, and coinage metals are examples.
The inner transition elements, the lanthanides and actinides, form the f block of the periodic table.
Study Guide 2

48. Ionic radii decrease because the: A. nuclear charge increases
B. nuclear charge decreases
C. atomic size increases
D. atoms are covalently bonded
Chapter Assessment 1

49. Elements tend to react in ways that allow them to achieve the configuration of the nearest ___.
A. nonmetal
B. metalloid
C. noble gas
D. metal
Chapter Assessment 2

50. Which is the least reactive of the alkali metals in group 1? A. cesium
B. francium
C. rubidium
D. lithium
Chapter Assessment 3

51. Which metal of group 13 is a metalloid? A. boron B. aluminum
C. gallium
D. thallium
Chapter Assessment 4

52. Which is the most abundant element on Earth? A. hydrogen B. oxygen
C. nitrogen
D. aluminum
Chapter Assessment 5

53. Which is the least reactive of the halogens? A. fluorine B. iodine
C. selenium
D. chlorine
STP 1

54. Which elements are known as the iron triad?
A. iron, cobalt, and nickel
B. iron, ruthenium, and osmium
C. iron, nickel, zinc
D. manganese, iron, and nickel
STP 2

55. Which group of elements is often used to speed up chemical reactions?
A. noble gases
B. iron triad
C. platinum group
D. coinage metals
STP 3

56. Which actinide is a naturally occurring, radioactive element used as a source of nuclear fuel and other radioactive elements?
A. platinum
B. uranium
C. cerium
D. lithium
STP 4

57. Which region in the periodic table are the most reactive metals located?
A. s
B. f
C. p
D. d
STP 5

58. Click on an image to enlarge.
IB Menu

59. IB 1

60. IB 2

61. IB 3

62. IB 4

63. IB 5

64. IB 6

65. IB 7

66. IB 8

67. IB 9

68. IB 10

69. IB 11

70. IB 12

71. IB 13

72. Figure 8.3 Trends in atomic radii
Table 8.0 Alloy Steels
Figure 8.3 Trends in atomic radii
CIM

73. To use this Interactive Chalkboard product:
Click the Forward button to go to the next slide.
Click the Previous button to return to the previous slide.
Click the Home button to return to the Chapter Menu.
Click the Return button in a feature to return to the main presentation.
Click the Exit button or press the Escape key [Esc] to end the slide show.
Click the Help button to access this screen.
Click the Chapter Resources button to view available resources for the chapter. These resources include Chemistry Online, Study Guide, Chapter Assessment, Standardized Test Practice, Image Bank, and Concepts in Motion.
Concepts in Motion pieces can also be accessed on relevant lecture note slides.
Help

74. This slide is intentionally blank.
End of Custom Shows