1. Diffusion What is Engineering

2. What do these processes have in common? 1) Hydrogen embrittlement of pressure vessels in nuclear power plants 2) Flow of electrons through conductors 3) Dispersion of pollutants from smoke stacks 4) Transdermal drug delivery 5) Influenza epidemics 6) Chemical reactions 7) Absorption of oxygen into the bloodstream

3. They all depend on Diffusion (conduction) What is diffusion? The transport of material--atoms or molecules--by random motion What is conduction? The transport of heat or electrons by random motion.

4. Brownian motion causes the ink particles to move erratically in all directions. A concentration of ink particles will disperse. DIFUS.HTM DIFUS.HTM Place a drop of ink into a glass of water. What happens?

5. Because there are more ways for the particles to drift apart than there are for the particles to drift closer together. Why does random motion cause spreading of a concentration of particles? We can also explain the spreading of a concentration by entropy. The second law of thermodynamics says that systems tend towards maximum entropy – or maximum disorder. Area of high concentration and low/zero concentration is an ordered state and the mixed state is the disordered state!

6. Other examples? Why do metal cooking spoons have plastic handles?

7. Other examples? What happens if someone across the room sprays perfume? Perfume diffusion simulation

8. After adding milk and sugar, why do we stir our coffee? Diffusion is slow! Agitation (or stirring) can move fluids much larger distances in the same amount of time, which can accelerate the diffusion process.

9. Values for Diffusivity D Greater the diffusivity, greater the flux!

10. In each of these examples, molecules (or heat) are moving down a gradient! (From an area of high concentration to an area of low concentration) Ficks Law: J i is called the flux. It has units of D is called the diffusion coefficient. It has units of

11. Do our definitions of flux make sense? N2N2 CO 2 (constant T & P) time C(*) If double area of capillary, expect the amount of gas transported to double. Want flux independent of apparatus – normalize by area. Flux is proportional to the concentration gradient – steeper the gradient, more material transported. Flux is inversely proportional to capillary length – increasing the distance to travel will decrease the flux.

12. Steady diffusion across a thin film Now lets use our diffusion equation to predict the concentration profile of a material diffusing across a thin film! If we are at steady-state (the concentration profile has no time dependence, or in other words, there is no accumulation of i in the film), we have a linear concentration profile. Well-mixed dilute solution with concentration c i,l Well-mixed dilute solution with concentration c i,0 Thin film c i,0 c i,l l

13. Concentration-dependent diffusion z=0 z=z c z=l c i,0 c i,c c i,l D1D1 D2D2 Which diffusivity is greater? How do you know? Consider two neighboring thin films with a separation at c i,c :

14. Unsteady state diffusion Back to a drop of ink in a glass of water… If consider diffusion in the z-direction only: How does the concentration profile change with time? (add ink drop – all ink located at z = 0) z=0 t = 0 t A measure of the spread due to diffusion is the diffusion length L d = (4Dt )0.5, where D is the diffusivity coefficient and t is time. Note: for small time, spreading is quick, but for long times it slows down. Thats why you stir your coffee after adding cream. Diffusion doesnt work fast enough over long distances.

15. Heat Transfer Occurs by three means: 1.Conduction: Occurs between two static objects Heat flows from the hotter to the cooler object For example, holding a cup of hot coffee 2.Convection: Transport of heat via a fluid medium Currents caused by hot air rising, fan circulating air 3.Radiation: Transport of energy as electromagnetic waves; the receiving body absorbs the waves and is warmed For example, warmth of a fire

16. Heat moves down a temperature gradient! (From an area of high temperature to an area of low temperature) Fouriers Law: q z is called the heat flux. It has units of k is called the thermal conductivity. It has units of α is called the thermal diffusivity. It is defined as and has units of

17. Thermal Conductivity Values Greater the thermal conductivity, greater the heat flux!

18. Consider a two-paneled door: metalwood What will the steady-state temperature profile look like? Why? TcTc THTH Heat Conduction z k metal > k wood

19. Heres a heat-conducting bar with a fixed temperature T at each end: T(t,0)=0; T(t,100)=100. 2k 1 = k 2. z=0 z=100 T(t,0)=0 T(t,100)=100 κ1κ1 κ2κ2 At steady-state: Therefore, the ratios of the temperature gradients in each section must equal the inverse ratios of the ks. (Constant flux)

20. Gradient transport summary 1. Momentum transferNewtons Law flux of x-momentum in z direction zx x dv dz (), v x is velocity in x-direction, is density, is viscosity. 2. Heat transferFouriers Law heat flux in z-direction q A dcT dz z p () ; is thermal diffusivity, is density, c p is heat capacity, T is thermal energy (heat). 3. Mass transferFicks Law mass flux of A in z-direction JD dc dz AzAB A ;D is molecular diffusivity of A in B, C A is the concentration of A.

21. Heat conduction Diffusion processes Diffusion-limited aggregation