1. Measurement Schmeasurement

2. There is No Such Thing as a Perfect Measurement…
The quality of a measurement depends upon:
The precision of the instrument(s) used.
The accuracy of an instrument.
The ability of the instrument user.

3. Accuracy
Accuracy is the extent to which a reported measurement approaches the true value of the quantity measured.
Do we always know the true value?
How can we improve upon our accuracy?

4. Precision
Precision is the degree of exactness or refinement of a measurement, and is based on the precision of the measuring instrument.

5. Precision
…has to do with the certainty in measurement due to the instrument used.

6. Accuracy vs. Precision
Accuracy is telling the truth Precision is telling the same story over and over again.
-Yiding Wang

7. Accuracy vs. Precision

8. Significant Figures (Sig Figs)

9. Significant Figures
When physical quantities are measured, the measured values are known only to within the limits of the experimental uncertainty.
You cannot claim levels of precision that the measuring device you used cannot discern.
Significant figures are used to communicate the certainty of a measurement.

10. More on Significant Figures
The number of significant figures is the number of digits believed to be correct by the person doing the measuring.
It includes one estimated digit.

11. Which glassware would give you the most precise volume measurement?

12. Never Use Too Many Figures…
If you express a the distance from Austin to Dallas as 196 miles  1 mile (the last digit is estimated).
If you choose to report this measurement in inches, your calculator would show:

13. But You Measurement Was NOT So Precise to One Inch…
In fact, it was only precise to inches (one mile of inches).
Which makes the all of the numbers in the circle NOT significant.

14. In ALL LABS… Report all certain values as significant figures.
Estimate (and report as significant) to the 1/10th of the smallest division of measurement.

15. Significant Figures When is a Figure Significant?
Figures which are not zero are all significant.
has six significant figures
2. If a zero falls between two non-zero figures, it is significant;
has six significant figures
3. Zeros to the left of the first figure which is not zero are not significant has four significant figures has three significant figures
4. Zeros at the end of a number are significant and have five significant figures
5. Scientific notation is used to avoid using non-significant zeros at the end of a number without a decimal point 2.06 x10^3 has three significant figures 2060 is ambiguous. For definiteness we will write it as 2.06 x10^3 or 2.060x10^3 as appropriate.

16. Significant Figures Rules of Operation
ADDING AND SUBTRACTING
When measurements are added or subtracted, the answer can contain no more decimal places than the least precise measurement.
150.0 g H2O
g salt
150.5 g solution

17. Significant Figures Rules of Operation
MULTIPLYING AND DIVIDING
When measurements are multiplied or divided, the answer can contain no more significant figures than the least precise measurement.
2 Sig Figs
3 Sig Figs