1. Demolition 29 CFR 1926, Subpart T

2. Overview of the OSHA regulation
Preparations
Pre-job survey
By competent person
Determine structural integrity
Have evidence in writing 1a

3. Overview of the OSHA regulation
Preparations
All utilities shut off
Needed utilities relocated to temporary hook-up
Identify hazards & guard (glass)
Cover all floor openings not to be used 1a

4. Stairs, Passageways, & Ladders
Close those not to be used
Maintain only those for access
Proper illumination needed 2a

5. Chutes
No dropping of materials outside the building w/o protection (chute)
Totally enclose chutes 45 degrees & greater
End of chute guarded 2b

6. Masonry Removal
Do not overload floors with materials from other floors or components
Totally enclose chutes 45 degrees & greater
Safe access to scaffolds & walkways required 2b

7. Floor Removal Provide adequate work surfaces for employees
Minimum 2X10 (undressed) planks
Openings less than 16” 3a

8. Using Equipment for Removal
Check structure’s ability to support load
Provide curbs to prevent driving over edge
Meet all aspects of Subparts N & O 3b

9. Storage
Debris on floors must not exceed allowable floor loads 3c

10. Mechanical Demolition
Keep employees out of work area
Remove heavy building attachments prior to demo
Cut steel prior to pulling over
Competent person must oversee job 3d