1. TH series Distributors
Standard Features
Flat Back and Full Round
45-60 degree slope
4 plus discharges
Locking inner spout
Removable inner spout
Removable inlet stub
Opening slide: Custom Metal Fabricators TH series distributors

2. Flat back or Full round

3. 45 degree degree
Intermediate slopes available on request

4. Any number of discharges on full round or flat back

5. Inner spout drops into discharge stub and locator ring when correctly aligned

6. Inner spout can be disassembled and taken out through the access door

7. Removable inlet stub can be replaced when it becomes worn

8. Distributors come standard with the customers choice of Cable control or Pipe control

9. Optional Features Painted or Galvanized Finish
Stainless Steel Construction
Custom sized discharge stubs
Special lining of stubs and/or inner spout
Cone bottom
Power Select electric drive unit

10. Custom sized discharge stubs
Finish
Enamel paint
Hot dip galvanize after welding is completed
Material
Carbon Steel is standard
Stainless Steel is optional any available alloy
Custom sized discharge stubs
Discharge stubs can be tube size or pipe size
They can be sized up or down compared to the inlet size

11. Lining options Several material and thickness options are available
Urethane/Kryptane AR
Ceramic tile
UHMW
Please inquire if you require lining materials not listed

12. Cone bottom
The cone bottom can be used to redirect dust or overflow material back to the leg or a storage bin. The discharge elbow can be rotated 360 degrees.

13. Power Select drive
The Power Select drive is a computer controlled hydraulic unit that bolts directly to the bottom of any CMF distributor. The Power Select maintains the up and down action of the inner spout requiring a positive lock in the discharge stub before the ready signal is given on the operator station. Full round models incorporate logic to pick the shortest route of travel to the selected discharge. The Power Select may be factory installed on new units or retrofit in the field to existing units.