1. Master programme: “Industrial IT and Automation”
PPT made by Nils-Olav Skeie
- IIA programme coordinator

2. Agenda HSN (USN) Introduction, TNM Faculty introduction,
TNM on Campus Porsgrunn,
Master programme:
“Industrial IT and Automation”,
Industry master:
Courses,
Learning activities,
Project and master thesis,
Status.

3. 18.000 88
Students 44
1.500 8 8
TNM fakultetet: Bø, Kongsberg, Porsgrunn og Vestfold
HSN er Norges nest største høyskole, med studenter og 88 bachelorutdanninger å velge mellom.

4. TNM - Faculty for Technology, Natural Sciences and Maritime Sciences
Departments in Bø, Kongsberg, Vestfold (Bakkenteigen) and Porsgrunn,
Departments at campus Porsgrunn:
EIK: Electrical Engineering, IT and Cybernetics,
PEM: Process, Energy and Enviromental Technology.
Department
Bachelor Programmes
Master Programmes
EIK
Computer Science and Industrial Automation
Industrial IT and Automation
Electric Power Engineering
PEM
Civil Engineering
Energy and Environmental Technology
Mechanical Engineering
Process Technology
Clean Energy and Process Technology

5. Technological studies at Campus Porsgrunn
PhD
(3 years)
Master (2 years)
Bachelor (3 years)
E-learning: IIA, PT as EET as part time online teaching.
Process, Energy
and
Automation Engineering
Energy and
Environ-
mental
Technology
(EET)
Process
Technology
(PT)
Electrical
Power
Engineering
(EPE)
Industrial
IT and
Automation
(IIA)
Industrial 4.0,
IoT,
Digitalization.
Bygg / Maskin/ Kjemi/ Elektro A-vei og Y-vei alle linjer
Forkurs og TRES
Innenfor teknologi har vi 6 bachelorprogrammer, 4 masterprogrammer og ett doktorgradsprogram. De fire masterprogrammene undervises på engelsk. I år har vi også for første gang opptak til master i elkraftteknikk. Vi har både forkurs og realfagskurs (tresemesterordning).
Og til dere som går på forkurs; vi har eksempler på studenter som startet på forkurs og endte opp med en doktorgrad. Noen tar også en bachelorgrad, jobber noen år og kommer tilbake for å ta mastergrad. Det er blitt enklere nå, siden vi har tee av de fire masterprogrammene som deltids nettstudier.

6. Industrial IT and Automation
Sensors and Measurement,
Monitoring and Analysis,
Industrial IT,
Modeling,
Control,
Optimization,
Software development,
Projects;
Groups; master project
Individual; master thesis.

7. Industrial IT and Automation: Master programme
Campus programme (2006);
2 years, full time;
Internationalization in 3rd or 4th semester,
Master project as group project; Master thesis as individual project.
Online programme (2015);
4 years, 50% time;
Internationalization in 6th, 7th or 8th semester,
Master project and master thesis in a company, if working.
Industry master (2018?);
3 years, 50% time, employed in a company,
Assignments in the company,
Internationalization in 5th (or 6th) semester.
Master project and master thesis in the company.
PhD,
Industrial PhD

8. IIA Industry master Mandatory gatherings on campus:
Programme start-up, 2 days
1 day at end of first semester,
3 days in second semester,
4 days in third semester,
2 days in fourth semester,
(Project: 1 day in fifth semester),
(Thesis: 1 day in last semester).
Final tests, one day for each course.

9. Learning activities: All courses are taught in English,
Teaching videos;
self-produced thematic videos, videos of lectures on campus or external videos,
Preferably asynchronous teaching activities;
teacher and student need not be online at the same time, except for online guidance,
Assignments, exercises and projects;
individually or in collaboration with others,
Most teaching resources are available for both online and campus students;
Teaching plan, exercises, solutions and supplementary literature;
available in the online education system (Canvas).

10. Projects and Thesis
Master projects in 5th semester, group based, 10 credits (1/3 of the semester),
Task description in middle of August, deliver at end of November,
Use the knowledge from some of the courses,
Work in a project, preferably as a project manager or sub project manager,
Grading based on report, process and examination.
Master Thesis in 6th semester, one student, 30 credits (whole semester),
Task description in middle of November, deliver in middle of May,
Use the knowledge from most of the courses,
Contents (normally):
Literature survey, Develop a model, use model for simulation/verification/optimization, develop prototype,
Literature survey, System development; analysis, design, implementation and testing,
Grading based on report only.

11. EIK: Industry Advisory Council
Meetings once every semester,
March/April and October/November,
Members;
Industry;
Goodtech Projects and Services AS, Skagerak Kraft, Ineos Bamble AS, Neflo Telemark, ABB, Kebony AS, Multifag AS, Kongsberg Maritime, IKT Telemark,
HSN;
EIK Programme coordinators and department leader,
BSc and MSc students.