1. EVERLINE® LED Emergency Drivers
Greg Bennorth
Director, Product Management

2. Overview Family of 4 Emergency LED Driver SKUs
What’s an Emergency LED Driver?
It is a battery back-up driver that is connected in parallel with an existing driver within a fixture
The Emergency drivers contain a NiCad battery that is continually having a charge maintained
When power goes out, the Emergency Driver cuts in and provides power to the LED modules for up to 90 minutes
Fixtures will operate at lower lumen levels when in the emergency mode
Who Buys Emergency Drivers?
OEMs, where projects require emergency lighting up to 1 in 10 fixtures have one installed
Our OEM targets will be small and mid-tier customers that purchase EVERLINE drivers
Distributors for MRO and sometimes as an add on for new installations
EM Driver Ratings
Output Power
This is the output power supplied in emergency mode
Output current will vary based on the load voltage
Lumen output can be calculated based on the output power
Output Voltage Range
The output voltage range must cover the range of the connected load
UL Listed
Listing allows for field installation
California Title 20 Compliant
Meets Battery charger requirements for California

3. Emergency Drivers Product Overview
ELD10UNVL: 10W LED Emergency driver
Features:
Integrated NiCad battery
Lead wire only
90 minute illumination time
Harness included for wiring
Test switch and charging light included
Applications:
Output voltage range of 10-50Vdc
Targeted for linear fixtures
 ELD10UNVLPL: 10W LED Emergency driver (Low Profile version)
Low profile (1.18” h x 1.18” w)
Output voltage range of 15-52Vdc
Targeted for architectural fixtures

4. Emergency Drivers Product Overview
ELD7UNVCL: 7W LED Emergency driver
Features:
Integrated NiCad battery
Flexible conduit
90 minute illumination time
One harness goes to the driver and modules
Second harness goes to test switch for remote mounting
Remote mounted due to downlight application
Test switch and charging light included
Applications:
Output voltage range of 15-50Vdc
Targeted for downlight applications
ELD20UNVL: 20W LED Emergency driver
Conduit harness contains all the leads
Typically remote mounted due to size
Output voltage range of 20-50Vdc
Targeted for high bay applications

5. Product Notes Inventory in L80 (to begin)
Ordering Code
Catalog #
Power
Voltage
Connection
Luminaire Applications
Notes
Master Carton Qty
ELD10UNVL000I
ELD10UNVL
10W V
Leads
General Linear 10
ELD10UNVLPL000I
ELD10UNVLPL
Architectural Low Profile
Low Profile
ELD7UNVCL000I
ELD7UNVCL 7W
Conduit Leads
Downlights 6
ELD20UNVL000I
ELD20UNVL
20W
High Bay
Inventory in L80 (to begin)
Individual Packs in Master Cartons
Parts Kit included
Additional faceplate for 7W
Product Available to order now.
Inventory by the end of the month.

6. Wiring Connection Notes
Line Side Connections
One Connection to un-switched branch for monitoring
Separate connection to switched power
Converter Connector
Must be connected to link in the batteries
Disconnected during shipment
Output Load
Connect total output load
Do not connect just one module in multi module fixture
Test Switch – Indicator Light
Dual function component
To be tested monthly per NFPA code
w/ LED Driver
w/ Step-Dimming Driver
For Emergency Mode Only (no Driver)

7. Product Labels I-Pack Label Master Carton Label
I-Packs within
*Carton label will have extra bar codes not relevant for Universal

8. Marketing Support
to internal sales (OEM & DIST RSMs): February 5th
Formal launch eblast (OEM & DIST Agents & Customers): Early March
Press Release on website: Early March
Social Media announcements: Early March
Collateral PDFs currently available on
Product Flyer
Installation Instructions
Spec sheets
To support adoption of the Emergency Drivers, these tactics (among others) will be in play…
Training Presentation posted to Presentation Library
Emergency Drivers Application Guide – to be added
LED Selector Guide – to be updated
Retrofit Solutions Guide – Emergency Drivers Spec Sheet to be added to booklet
Blueprint Newsletter (print & eblast)
IMARK & AD notification to members
Incorporation into ongoing marketing/sales programs
If additional support is required in your local market, please contact Heather DeWire at

9. Snap this QR Code and quickly access our website.
Thank you
Snap this QR Code and quickly access our website.
Website:
Nashville Customer Service: (800)
Universal Technical Engineering Services: (800)