1. March 2017
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: VAT V2X CAMCOM Modulation Methods
Date Submitted: July 2017
Source: Jaesang Cha, Miseon Kim, Minwoo Lee, Vinayagam Mariappan (SNUST), Jeonggon Kim (Korea Polytechnic Univ.), Sangwoon Lee (Namseoul Univ.), Ilkyoo Lee (Kongju Nat’ Univ.), Gilsik Lee (The Univ. of Texas at Dallas), Sooyoung Chang (CSUS)
Address: Contact Information: , FAX: , Re:
Abstract: This documents introduce the V2X CamCom modulation methods for Vehicular Assistant Technology(VAT). This proposed LiFi / CamCom Modulation methods for VAT to operate on the application services like ITS, ADAS, etc on road condition. Also this proposed modulation techniques can used for IoT/IoL, LEDIT, Digital Signage with Advertisement Information etc..
Purpose: To Provided Concept models of Vehicle CamCom for Vehicular Assistant Technology (VAT) Interest Group
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
Slide 1
Submission

2. Contents V2X CAMCOM Introduction V2V CAMCOM Modulation Techniques
V2I Traffic Light - CAMCOM Modulation Techniques
V2I Roadway Signage - CAMCOM Modulation Techniques
Conclusion

3. V2X CAMCOM Introduction (1)
V2X CAMCOM Technology
V2V CAMCOM for VAT used the Vehicle tail and head lights LEDs
V2I CAMCOM for VAT used the Traffic Lights LEDs and Roadway Signage Systems
Need Robust Modulation Techniques
Different Modulation used including Optical MIMO
Adaptive Modulation Techniques for different applications
Equalization Techniques have advantages in design

4. V2V CAMCOM Modulation Techniques
V2V CAMCOM for VAT use the Vehicle tail and head lights LEDs
Efficient Modulation Method
OOK
Multilevel PPM
Inverted PPM
Sub Carrier PPM
DSSS SIK
V2V CAMCOM Technology

5. V2I Traffic Light - CAMCOM Modulation Techniques
V2I CAMCOM for VAT use the Traffic Lights LEDs
Efficient Modulation Method
OOK
Multilevel PPM
Inverted PPM
Sub Carrier PPM
DSSS SIK
CAMCOM Technology

6. V2I Roadway Signage - CAMCOM Modulation Techniques
CAMCOM for VAT use the Roadway Signage Systems
Efficient Modulation Method
A-QL
VTASC
SS2DC
IDE

7. Conclusion
Proposed the V2X CAMCOM Modulation Methods used in V2V, V2I using Traffic Signals and Roadway Signage Model
Proposed algorithms communication processing time is low and increase the communication performance