1. Chapter 13 Auxiliary Views
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

2. Is it any different sketching than modeling?
Sketch this part using multi-view projection and correctly locate the holes in whichever view is most descriptive.
Is it any different sketching than modeling?

3. T or F Auxiliary Views are an Orthographic Projection? TRUE
LOS is perpendicular to inclined plane

4. Two Methods to create Fold Line (parallel to edge view of a plane)
Reference Plane (perpendicular to edge view of a plane)

5. Classifications of Auxiliary Views
Primary
Secondary
Tertiary
What is the next one called?

6. Steps to get oblique surface in
true size and shape
Point view of a line
Edge view of a surface

7. angle between two planes
Dihedral angle-
angle between two planes

8. Types of Auxiliary Views
Depth=______
Height=______
Width=_______
Partial
Half
What is the missing dimension?

9. Partial (only needed information is shown)
Must be noted or show break line

10. Half to show symmetrical parts (also partial)

11. Volunteer to sketch views on board
Homework: Model and put this on title block using least # of views and Auxiliary view to detail.
Volunteer to sketch views on board

12. Homework: Min # Views, Dimensioned in correct view
Line Style set to A,0.5,-0.5