1. Pascal Auto Systems 25/2A/1, Nanded Phata, Opp. Savali Dhaba,
Sinhagad Road, Pune.
Tel : ,
Mob:
Id:

2. About Company CEO : Chandrashekhar
Pascal Auto Systems started in It is situated in automation hub at Sinhagad road, Nanded phata, Pune. We are a company working in the field of low cost automation and assembly SPMs and presses catering to automobile sector. Our expertise is in providing cost effective solutions in engine and vehicle assembly lines, taking due care of future maintenance issues and spares availability.
We also manufacture hydraulic power packs, CNC machining fixtures
Our main area of operation is hydraulics and pneumatics.

3. MOTTO & QUALITY POLICY MOTTO:- “ TEAM WORK , RESPECT , INTEGRITY ,
SIMPLICITY ,
CONTINUAL IMPROVEMENT ”
QUALITY POLICY:-
We all are committed to manufacture products as per customer requirements in order to enhance the customer satisfaction.
This we shall achieve through continual improvement in our product quality.

4. Pascal Auto Systems CUSTOMERS : Bajaj Auto Ltd. Greaves cotton ltd.
Fiat India Automotive Ltd.
Tata Motors Ltd.
Jaya Hind Industries.
Cummins India Ltd.
Saj Test Plant Pvt. Ltd.
Dynomerk Controls
Umasons Auto Comp Pvt. Ltd.
Shakti Component Ventures.
Eurotech Manufacturer SDN BHD., Malaysia.
Carraro India Ltd.
Xytel India Pvt. Ltd.

5. Low cost automation and assembly presses
OUR PRODUCTS :-
Low cost automation and assembly presses
Multi axis with auto feeder press
C-frame press
Single axis with auto feeder press

6. CNC machining fixtures
OUR PRODUCTS :-
CNC machining fixtures
Lifters
Hydraulic systems, power packs.

7. Machines supplied by Pascal Auto Systems

8. 4S Clutch side multi axis press machine
Features :
6 Parts pressing.
Drain bolt tightening
Less time cycle (22 sec).
Less material handling.
Job present poka for all child part.
Auto feeder for shifter bush, nrb, circlip parts.
Barcode scanning & no. marking.
Safety pokas and alarm (with error display on hmi)
Drain bolt
Nrb
Rivet
Ball bearing
No. marking
Shifter bush
O-ring
Circlip

9. 4S Magneto side multi axis press machine
Oil seal
Ball bearing
Ball bearing
Oil seal
Ball bearing
Ball bearing

10. 4S Magneto side multi axis press machine
Features :
6 Parts pressing.
Less time cycle (18 sec).
Less material handling.
Job present poka for all child part.
Auto feeder for bearing and oil seal parts.
Safety pokas and alarm (with error display on hmi) .

11. Input, output, differential shaft bearing press
Features :
5 Parts pressing.
Less time cycle (26 sec).
Less material handling.
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi)

12. Crank shaft pull & oil seal press
Features :
Crank shaft pulling in to bearing.
Oil seal pressing.
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi)
Crank shaft
Crank case
Bearing
Oil Seal

13. Wt balancer key-gear-nrb press
Features :
Key-gear-wt balancer pressing in first stage.
2 Nrb pressing in second stage.
Removed previously key to gear slot orientation problem
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi).
Nrb
Wt balancer
Key
Nrb
Gear

14. Cylinder head nipple press
Features :
Cylinder head nipple pressing with conveyors.
Pressing load measurement.
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi).

15. Trailing arm press Spring fitment
Axle
Oil seal
Nrb
Trailing arm

16. Cylinder head plug press
Features :
4 Plug pressing.
Less time cycle (24 sec).
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi).
Cyl head
Plug

17. Valve seat & valve guide press
Features :
Inlet & exhaust valve seat, valve guide pressing.
Applicable for 4 types of cyl head.
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi).
VALVE GUIDE
VALVE GUIDE

18. Transmission shaft-gear press
Features :
Transmission shaft-gear pressing.
Heating of gear on part loading stage.
Reduces heat loss.
Reduces material handling time.
Reduces cycle time.
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi)

19. Crank case multi axis hydropneumatic press machine
Crank Shaft oil hole plug and bush press machine
Features :
2 Dowel, oil seal , 2 bearing pressing.
Pressing load measurement.
Features :
4 Plug pressing.
Bush pressing.

20. Cylinder head rocker-pin press machine
Features :
Rocker pin pressing.
Less time cycle (20 sec).
Less material handling.
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi).
Rocker
Pin
Cylinder head

21. Knuckle-hub press machine
Features :
Hub pressing.
2 types of knuckle assy-hub pressing.
Pressing load measurement.
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi).
Hub
Knuckle

22. Knuckle assy -hub press machine Knuckle-bearing-circlip press machine

23. Crank case oil seal press tool
Features :
Oil seal pressing.
Removed previously oil leakage problem
Compact & on line pressing.
Job present poka for all child part.
Safety pokas and alarm (with error display on hmi).
Oil seal
Oil seal press tool

24. KTM, DUKE frame no. marking machine for Malaysia
Features :
Applicable for two frames
Barcode scanning & no. marking.
Safety pokas and alarm (with error display on hmi).

25. 3Wh no. marking tool 4Wh no. marking tool
No. marking tool assembly
4 Wheeler B-piller
No. marking tool assembly
3Wh dash board

26. Platina oil filling fixture Discover oil filling fixture

27. Clutch housing machining fixtures
Set up-1
Set up-2

28. 2&3 Cyl head machining fixtures
Set up-1
Set up-2
Set up-3
Set up-4

29. Lifters
Tank lifter
Trailing arm lifter
Pot lifter

30. Conveyors
Station-2
Forward
Station-1
Pallet return

31. Oil Pumping station Filtration Vehicle (Tanker) Tank-1 Tank-2
Application line
Tank-2
Tank-1
Filtration unit

32. We Value Your Business.
Thank you for your valuable time. !!!