Download presentation
Presentation is loading. Please wait.
1
LETS Phase 3 Review 4/29/08
2
Agenda Team Introduction Daedalus Concept Subsystem Overview
Concept of Operations Daedalus Performance Daedalus Vision Questions
3
Team LunaTech Nick Case, Project Manager
Morris Morell, Systems Engineer Travis Morris, GN&C Greg Barnett, Thermal Systems Adam Garnick, Power Systems Katherine Tyler, Power Systems Tommy Stewart, Structures and Mechanisms Julius Richardson, Conops John Grose, Payload and Communications Adam Fanning, Communications Eric Brown, Technical Editor
4
Partners Mobility Concepts Sample Return Vehicle Design
Southern University Robert Danso McArthur Whitmore Sample Return Vehicle Design ESTACA Julie Monszajin Sebastien Bouvet
5
Daedalus Lander
6
Daedalus Lander
7
Concept of Operations
8
Daedalus LPES
9
Daedalus Thermal
10
Daedalus Power
11
Daedalus GN&C
12
Daedalus Communications
13
Daedalus Performance Figures of Merit Goal Daedalus
Number of surface objectives accomplished 15 Samples in permanent dark and 5 samples in lighted terrain 16 Samples in permanent dark and 6 samples in lighted terrain Percentage of mass allocated to payload Higher is better 40% of Dry Mass Ratio of objectives (SMD to ESMD) validation 2 to 1 Efficiency of getting data in stakeholders hands vs. capability of mission Redundant Communication Percentage of mass allocated to power system Lower is better 17% of Dry Mass Ratio of off-the-shelf hardware to new development hardware
14
Proposed LPRP Timeline Using Daedalus
Daedalus Vision Proposed LPRP Timeline Using Daedalus LRO (2008) LCROSS (2008) LCS (2010) Daedalus I (2012) Daedalus II (2014)
15
Daedalus Vision Starting with a basic, yet powerful and adaptable lander; building on the good design practices and valuable data will allow the Daedalus concept to evolve with each lunar mission and provide a low-cost solution for the Lunar Precursor Robotic Program. This is the Vision of Daedalus, and the mission of Team LunaTech.
16
Questions
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.