1. Copyright © 2018 W.S. Darley and Company. All Rights Reserved.
DigiTrol™+ Panel
Kubota Mechanical Diesel Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-M1705
Main Panel
Actuator
Kubota
Mechanical Engines
(12VDC Battery)
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
High Engine Temperature (Default = Alarm/Shutdown)
Low Oil Pressure (Default = Alarm/Shutdown)
Over Speed (Default = Off)
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay)
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
C Series
Display & Control
MVP-M1105
Remote Panel
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
CAP
Terminating Cap
Page 1 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

2. Copyright © 2018 W.S. Darley and Company. All Rights Reserved.
DigiTrol™+ Panel
Kubota Mechanical Diesel Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-M1705
Main Panel
Actuator
Kubota
Mechanical Engines
(12VDC Battery)
CAP
Terminating Cap
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
High Engine Temperature (Default = Alarm/Shutdown)
Low Oil Pressure (Default = Alarm/Shutdown)
Over Speed (Default = Off)
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay)
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
SINGLE PANEL
INSTALLATION
C Series
Display & Control
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
Page 2 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

3. Diesel DOC/DPF Engines
DigiTrol™+ Panel
Kubota J1939 DOC/DPF Diesel Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-A1706
Main Panel
Kubota J1939
Diesel DOC/DPF Engines
D180337T
(12VDC Battery)
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
All Kubota J1939 ECU Alarms & Shutdowns
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
C Series
Display & Control
MVP-A1106
Remote Panel
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
CAP
Terminating Cap
Page 3 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

4. Diesel DOC/DPF Engines
DigiTrol™+ Panel
Kubota J1939 DOC/DPF Diesel Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-A1706
Main Panel
Kubota J1939
Diesel DOC/DPF Engines
D180337T
(12VDC Battery)
CAP
Terminating Cap
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
All Kubota J1939 ECU Alarms & Shutdowns
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
SINGLE PANEL
INSTALLATION
C Series
Display & Control
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
Page 4 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

5. Diesel DOC Only Engines
DigiTrol™+ Panel
Kubota J1939 DOC Only Diesel Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-A1707
Main Panel
Kubota J1939
Diesel DOC Only Engines
D1803TI49T
V2403TI65T
V3800TI74T
(12VDC Battery)
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
All Kubota J1939 ECU Alarms & Shutdowns
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
C Series
Display & Control
MVP-A1107
Remote Panel
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
CAP
Terminating Cap
Page 5 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

6. Diesel DOC Only Engines
DigiTrol™+ Panel
Kubota J1939 DOC Only Diesel Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-A1707
Main Panel
Kubota J1939
Diesel DOC Only Engines
D1803T9T
V2403TI65T
V3800TI74T
(12VDC Battery)
CAP
Terminating Cap
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
All Kubota J1939 ECU Alarms & Shutdowns
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
SINGLE PANEL
INSTALLATION
C Series
Display & Control
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
Page 6 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

7. Diesel DEF/SCR Engines
DigiTrol™+ Panel
Kubota J1939 DEF/SCR Diesel Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-A1708
Main Panel
Kubota J1939
Diesel DEF/SCR Engines
D3800TI114T
(12VDC Battery)
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
All Kubota J1939 ECU Alarms & Shutdowns
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
C Series
Display & Control
MVP-A1108
Remote Panel
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
CAP
Terminating Cap
Page 7 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

8. Diesel DEF/SCR Engines
DigiTrol™+ Panel
Kubota J1939 DEF/SCR Diesel Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-A1708
Main Panel
Kubota J1939
Diesel DEF/SCR Engines
D3800TI114T
(12VDC Battery)
CAP
Terminating Cap
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
All Kubota J1939 ECU Alarms & Shutdowns
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
SINGLE PANEL
INSTALLATION
C Series
Display & Control
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
Page 8 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

9. Copyright © 2018 W.S. Darley and Company. All Rights Reserved.
DigiTrol™+ Panel
Kubota J1939 Gas Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-A1709
Main Panel
Kubota J1939
Gas Engines
WG1605G-15045
WG2503G-15046
WG3800G-15047
(12VDC Battery)
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
All Kubota J1939 ECU Alarms & Shutdowns
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
C Series
Display & Control
MVP-A1109
Remote Panel
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
CAP
Terminating Cap
Page 9 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

10. Copyright © 2018 W.S. Darley and Company. All Rights Reserved.
DigiTrol™+ Panel
Kubota J1939 Gas Engines
Pressure Transducer
0 to 500 psi
4-20mA
MVP-A1709
Main Panel
Kubota J1939
Gas Engines
WG1605G-15045
WG2503G-15046
WG3800G-15047
(12VDC Battery)
CAP
Terminating Cap
System Operation
With system power ON:
Push button engine start/stop from either station (10 second pre-heat period)
Throttle increase/decrease from either station
Pressure maintain throttle switch (Select PSI and speed adjusts to maintain)
Shutdown override switch for run to fail operation
MVP Display/Controller (Metric/English Selectable)
Engine Temperature ▪ Battery Voltage
Engine Speed ▪ Fuel Level %
Oil Pressure ▪ Engine Hours
Engine Protections for:
All Kubota J1939 ECU Alarms & Shutdowns
Fuel Level (Default = Off)
Alarm Log records alarms with engine hour stamp.
MSG Pressure Gauge (Metric/English Selectable)
Displays pressure (PSI/BAR)
Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay
Panel Materials
Anodized aluminum plate (.09” thickness both panels)
Panel Color (Gray metallic background with black lettering)
Panel dimensions (8.5”H x 7.375”W)
Panel dimensions (7.375”Hx 8.5”W)
Metalphoto graphics and coating (for superior performance and scratch resistance)
Mounting hardware not provided
SINGLE PANEL
INSTALLATION
C Series
Display & Control
Notes:
All components and connectors are water tight
Modular panel system with custom extension harnesses available for plug and play installation and servicing
10 ft. and 20 ft. extension harnesses available
Red OLED displays
Momentary “push to start/push to stop” with over crank protection
Green lamp for panel power indication (not engine run)
15 amp circuit breaker pre-installed for easy access
5 second glow plug sequence when panel is powered ON
Page 10 of 10
Copyright © 2018 W.S. Darley and Company. All Rights Reserved.