1. Dali
CV dimming

2. DALI Dimmer Knowledge about DALI
Digital Addressable Lighting Interface (DALI)
DALI is specified by technical standards IEC and IEC
Standards conformance ensures that equipment from different manufacturers will interoperate.
Members of the AG DALI (founded by Philips lighting in 1984) were freely allowed to use the DALI trademark until DALI working party was dissolved on 30th March 2017.
Since 9th June 2017, Digital Illumination Interface Alliance (DiiA) certifies DALI equipment.

3. A typical DALI configuration
Assign addresses to each device. Monitor and control each device
A DALI network requires a 24V DC 250 mA power supply
DALI Controller
Group 1：Max 64
DALI +
DALI Power Supply
DALI -
DALI Device (Driver)
DALI Device
doesn't need any termination resistors
。。。
DALI Gateway w/ Power Supply
Group 2
The dimmer can be set to Group 1 or 2 through the DIP so as to control G1 or G2.
DALI Driver
DALI Driver
。。。

4. A single DALI group configuration
The DALI dimmer can control On/Off and dimming for a group of DALI drivers without DALI controller and DALI PS
(Set DIP to broadcast)

5. CV Dimming control for LED strips
Triac dimming 
1-10V 
Dali or Push dimming 
CV Dimming control for LED strips
Triac
1-10V or Push
PHOTO
Dali or Push
AcTEC is also providing relevant high quality dimmers matching with the above drivers for a perfect dimming of the LED strips.

6. CV Triac dimming
SM06A

7. CV 1-10V dimming