1. РОСІЙСЬКА МОВА Кількість завдань - 51 Час на виконання – 150 хв.
Макс. к-ть балів – 88
Animated title moves behind picture
(Intermediate)
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:
In the Shape Height box, enter 3.17”.
In the Shape Width box, enter 9.5”.
Drag the rectangle slightly above the middle of the slide.
Select the rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Left.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the next to Shape Outline, and then click No Outline.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 0.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 50% (fifth row, 10th option from the left).
Select the next stop in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 25% (fourth row, 10th option from the left).
To reproduce the “heading” text box on this slide, do the following:
On the Insert tab, in the Text group, select Text Box. On the slide, drag to draw a text box.
Enter the heading text, and then select text. On the Home tab, in the Font group, do the following:
In the Font list, select Calibri.
In the Font Size box, enter 38.
Click Bold.
Click the arrow next to Font Color, and then under Theme Colors click Orange, Accent 6, Darker 25% (fourth row, 10th option from the left).
On the Home tab, in the Paragraph group, click Align Text Left.
Drag the text box just above the rectangle, in the right half of the slide.
To reproduce the second text box on this slide, do the following:
On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.
Enter three lines of text with paragraph breaks, and then select the text. On the Home tab, in the Font group, do the following:
In the Font Size list, select 28.
Click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
On the Home tab, in the Paragraph group, click the Paragraph dialog box launcher. In the Paragraph dialog box, do the following:
On the Indents and Spacing tab, under General, select Left in the Alignment box.
Under Spacing, select 12 in the After box.
Drag the second text box onto the rectangle, below the “heading” text box.
To reproduce the full-color picture on this slide, do the following:
On the Insert tab, in the Images group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert.
On the slide, select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 5.08” and the width is set to 2.61”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Glow and Soft Edges in the left pane, and then, in the Glow and Soft Edges pane, do the following:
Under Glow, click the button next to Presets, and then click Blue, 5 pt glow Accent color 1 (first row, first option from the left).
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Drag the full-color picture on top of the rectangle, to the left of the text boxes.
On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Top.
To reproduce the second picture on this slide, do the following:
On the Insert tab, in the Images group, click Picture. In the Insert Picture dialog box, select the same picture, and then click Insert.
On the slide, select the picture. On the slide, select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2.44” and the width is set to 2.61”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
On the slide, drag the new picture directly below the first one, and then, in the Format Picture dialog box, in the Crop tab, under Picture Position, adjust the Offset X and Offset Y settings to align the content of the two images so that they appear continuous.
Also in the Format Picture dialog box, click Picture Corrections in the left pane, and in the Picture Corrections pane, under Brightness and Contrast, do the following:
In the Brightness box, enter 70%.
In the Contrast box, enter -70%.
Select the smaller picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Bottom.
Press and hold CTRL, and then select both pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Selected Objects.
Click Align Center.
To reproduce the animation effects on this slide, do the following:
On the slide, select the “heading” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Timing group, in the Duration box, enter 2.
On the Animations tab, in the Timing group, in the Delay box, enter 1.5.
On the slide, select the “heading” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths click Lines.
On the Animations tab, in the Animation group, click Effect Options, and then click Left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the slide, select the motion path for the “heading” text box, point to the starting point (green arrow) of the motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point about 1.5” off the left edge of the slide. (Note: If your lines of text are longer than in the example above, you may need to further increase the length of the motion path. )
On the slide, select the second text box. On the slide, select the “heading” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.
On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Fade dialog box, do the following:
On the Effect tab, in the Animate text list, select By Letter.
In the % delay between letters box, enter 5.
On the Timing tab, in the Start list, select After Previous.
In the Duration list, select 0.5 seconds (Very Fast).
On the Text Animation tab, in the Group text list, select By 1st Level Paragraphs.
To reproduce the background on this slide, do the following:
One the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Transparency box, enter 0%.
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 232, Green: 227, and Blue: 216.

2. Тест складається із завдань трьох форм:1
З вибором 1 правильної відповіді 2
На встановлення відповідності 3
З розгорнутою відповіддю
Animated radial list with picture
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.
(Intermediate)
Also on the Animations tab, in the Timing group, do the following:
In the Start list, select With Previous.
To reproduce the SmartArt effects on this slide, do the following:
In the Duration box, enter 1.00 seconds.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops that you added as follows:
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Select the first stop in the slider, and then do the following:
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Select the last stop on the slider, and then do the following:
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
To reproduce the animation effects on this slide, do the following:

3. Завдання з вибором однієї правильної відповіді (№ 1-36, 43-50)
Завдання з вибором однієї правильної відповіді (№ 1-36, 43-50)
Оцінюється в 0 або 1 тестовий бал:
1 бал, якщо вказано правильну відповідь;
0 балів, якщо вказано неправильну відповідь, або вказано більше однієї відповіді, або відповіді не надано.
До кожного із
завдань подано чотири варіанти відповіді, з яких лише один правильний. Завдання
вважається виконаним, якщо учасник тестування вибрав і позначив правильну
відповідь у бланку відповідей А
Animated SmartArt vertical list
(Intermediate)
To reproduce the animation effects on this slide, do the following:
On the Animation tab, in the Animation group, click Animation Pane.
To reproduce the SmartArt effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Effects. In the Change Entrance Effect dialog box, under Exciting select Curve Up, and click OK.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Block List (sixth row, first option from the left), and then click OK to insert the graphic into the slide.
In the Animation group, click Effect Options, and under Sequence, click One by One.
In the Timing group, do the following:
Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each of the rectangles.
On the Timing tab, in the Start list, select After Previous.
On the Timing tab, in the Duration list, select
Press and hold CTRL, and select each of the second-level rectangles on the slide. Drag the left sizing handle of one of the second-level rectangles to the left 0.5” to increase the width of the second-level rectangles. Note: The first-level rectangles (rounded rectangles) will decrease in width at the same time.
In the Animation Pane, click the double arrow under the curve up entrance effect (first effect) to expand the list of effects.
Press and hold CTRL, and select the second, fourth, and sixth effects (curve up entrance effects). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Entrance Effects. In the Change Entrance Effect dialog box, under Basic, select Peek In, and click OK.
Select the SmartArt graphic. Under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click the More arrow at the SmartArt Styles gallery, and under Best Match for Document select Intense Effect (fifth option from the left).
Press and hold CTRL, and then select each of the first-level rectangles (rounded rectangles) in the SmartArt graphic.
In the Animation group, click Effect Options, and under Direction, click From Top.
Under SmartArt Tools, on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Fill, and under Theme Colors select White, Background 1, Darker 25%. (fourth row, first option from the left).
In the Start list, select With Previous.
In the Duration list, select
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select White, Background 1 (first row, first option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background, and then click Format Background.
In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Select the top, second-level rectangle in the SmartArt graphic.
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3. (first row, seventh option from the left).
In the Type list, select Radial.
In the Direction list, click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows:
Select the center, second-level rectangle in the SmartArt graphic.
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 40% (fourth row, seventh option from the left).
Select the first stop on the slider, and then do the following:
In the Position box, enter 33%.
Select bottom, second-level rectangle in the SmartArt graphic.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, the first option from the left).
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left).
Press and hold CTRL, and select each of the second-level rectangles.
Select the last stop on the slider, and then do the following:
On the Home tab, in the Font group, in the Font Color list select White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
Under SmartArt Tools, on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Effects, then point to Shadow, and under Outer, click Offset Diagonal Bottom Right.

4. Приклад. Російська мова
Правильно выделена буква, обозначающая ударный гласный звук, в слове
А украинский
Б неприязнь
В агрономия
Г километр
Правильна відповідь: В.

5. Завдання на встановлення відповідності (№ 37 – 42)
Завдання на встановлення відповідності (№ 37 – 42)
Оцінюється в 0, 1, 2, 3 або 4 тестових бали:
1 бал за кожну правильно встановлену відповідність (логічну пару);
0 балів, якщо не вказано жодної правильної логічної пари або відповіді на завдання не надано.
До кожного завдання подано
інформацію, позначену цифрами (ліворуч) і буквами (праворуч). Щоб виконати
завдання, необхідно встановити відповідність інформації, позначеної цифрами та
буквами (утворити логічні пари). Завдання вважається виконаним, якщо учасник
тестування правильно зробив позначки на перетинах рядків (цифри від 1 до 4) і
колонок (букви від А до Д) у таблиці бланка відповідей А.
Animated SmartArt vertical list
(Intermediate)
To reproduce the animation effects on this slide, do the following:
On the Animation tab, in the Animation group, click Animation Pane.
To reproduce the SmartArt effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Effects. In the Change Entrance Effect dialog box, under Exciting select Curve Up, and click OK.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Block List (sixth row, first option from the left), and then click OK to insert the graphic into the slide.
In the Animation group, click Effect Options, and under Sequence, click One by One.
In the Timing group, do the following:
Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each of the rectangles.
On the Timing tab, in the Start list, select After Previous.
On the Timing tab, in the Duration list, select
Press and hold CTRL, and select each of the second-level rectangles on the slide. Drag the left sizing handle of one of the second-level rectangles to the left 0.5” to increase the width of the second-level rectangles. Note: The first-level rectangles (rounded rectangles) will decrease in width at the same time.
In the Animation Pane, click the double arrow under the curve up entrance effect (first effect) to expand the list of effects.
Press and hold CTRL, and select the second, fourth, and sixth effects (curve up entrance effects). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Entrance Effects. In the Change Entrance Effect dialog box, under Basic, select Peek In, and click OK.
Select the SmartArt graphic. Under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click the More arrow at the SmartArt Styles gallery, and under Best Match for Document select Intense Effect (fifth option from the left).
Press and hold CTRL, and then select each of the first-level rectangles (rounded rectangles) in the SmartArt graphic.
In the Animation group, click Effect Options, and under Direction, click From Top.
Under SmartArt Tools, on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Fill, and under Theme Colors select White, Background 1, Darker 25%. (fourth row, first option from the left).
In the Start list, select With Previous.
In the Duration list, select
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select White, Background 1 (first row, first option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background, and then click Format Background.
In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Select the top, second-level rectangle in the SmartArt graphic.
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3. (first row, seventh option from the left).
In the Type list, select Radial.
In the Direction list, click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows:
Select the center, second-level rectangle in the SmartArt graphic.
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 40% (fourth row, seventh option from the left).
Select the first stop on the slider, and then do the following:
In the Position box, enter 33%.
Select bottom, second-level rectangle in the SmartArt graphic.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, the first option from the left).
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left).
Press and hold CTRL, and select each of the second-level rectangles.
Select the last stop on the slider, and then do the following:
On the Home tab, in the Font group, in the Font Color list select White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
Under SmartArt Tools, on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Effects, then point to Shadow, and under Outer, click Offset Diagonal Bottom Right.

6. Приклад. Російська мова
Соотнесите слово и толкование его значения.
1 парировать
2 корректировать
3 апеллировать
4 манипулировать
А руководить людьми или группой людей
Б добиваться своих целей, представляя что-либо в искаженном виде
В исправлять, вносить поправки
Г опровергать возражения против чего-либо
Д обращаться за советом, поддержкой
Правильна відповідь: 1–Г, 2–В, 3–Д, 4–Б.

7. Завдання з розгорнутою відповіддю (№ 51)
Завдання з розгорнутою відповіддю оцінюється від 0 до 20 тестових балів за критеріями змісту та мовного оформлення: Теза: 0, 1 або 2 тестових бали Аргументи: 0, 1 або 2 тестових бали а. Приклад із літератури чи інших видів мистецтва: 0, 1 або 2 тестових бали б. Приклад, що є історичним фактом або випадком із життя: 0, 1 або 2 тестових бали Логічність, послідовність: 0, 1 або 2 тестових бали Висновок: 0, 1 або 2 тестових бали а. Орфографія та пунктуація: 0, 1, 2, 3 або 4 тестових бали б. Лексика, граматика та стилістика: 0, 1, 2, 3 або 4 тестових бали.
Завдання цієї форми передбачає
створення учасником тестування власного аргументативного висловлення на
дискусійну тему (бланк відповідей Б)
Animated SmartArt vertical list
(Intermediate)
To reproduce the animation effects on this slide, do the following:
On the Animation tab, in the Animation group, click Animation Pane.
To reproduce the SmartArt effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Effects. In the Change Entrance Effect dialog box, under Exciting select Curve Up, and click OK.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Block List (sixth row, first option from the left), and then click OK to insert the graphic into the slide.
In the Animation group, click Effect Options, and under Sequence, click One by One.
In the Timing group, do the following:
Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each of the rectangles.
On the Timing tab, in the Start list, select After Previous.
On the Timing tab, in the Duration list, select
Press and hold CTRL, and select each of the second-level rectangles on the slide. Drag the left sizing handle of one of the second-level rectangles to the left 0.5” to increase the width of the second-level rectangles. Note: The first-level rectangles (rounded rectangles) will decrease in width at the same time.
In the Animation Pane, click the double arrow under the curve up entrance effect (first effect) to expand the list of effects.
Press and hold CTRL, and select the second, fourth, and sixth effects (curve up entrance effects). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Entrance Effects. In the Change Entrance Effect dialog box, under Basic, select Peek In, and click OK.
Select the SmartArt graphic. Under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click the More arrow at the SmartArt Styles gallery, and under Best Match for Document select Intense Effect (fifth option from the left).
Press and hold CTRL, and then select each of the first-level rectangles (rounded rectangles) in the SmartArt graphic.
In the Animation group, click Effect Options, and under Direction, click From Top.
Under SmartArt Tools, on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Fill, and under Theme Colors select White, Background 1, Darker 25%. (fourth row, first option from the left).
In the Start list, select With Previous.
In the Duration list, select
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select White, Background 1 (first row, first option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background, and then click Format Background.
In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Select the top, second-level rectangle in the SmartArt graphic.
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3. (first row, seventh option from the left).
In the Type list, select Radial.
In the Direction list, click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows:
Select the center, second-level rectangle in the SmartArt graphic.
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 40% (fourth row, seventh option from the left).
Select the first stop on the slider, and then do the following:
In the Position box, enter 33%.
Select bottom, second-level rectangle in the SmartArt graphic.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, the first option from the left).
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left).
Press and hold CTRL, and select each of the second-level rectangles.
Select the last stop on the slider, and then do the following:
On the Home tab, in the Font group, in the Font Color list select White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
Under SmartArt Tools, on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Effects, then point to Shadow, and under Outer, click Offset Diagonal Bottom Right.

8. Приклад. Російська мова
Поддержите или опровергните высказывание:
«Природа не храм, а мастерская, и человек в ней работник».

9. КРИТЕРИИ ОЦЕНИВАНИЯ ТЕСТОВОГО ЗАДАНИЯ С РАЗВЕРНУТЫМ ОТВЕТОМ (СОБСТВЕННОГО ВЫСКАЗЫВАНИЯ) ПО РУССКОМУ ЯЗЫКУ
Содержание собственного высказывания оценивается по шести критериям
(1, 2, 3а, 3б, 4 и 5), изложенным в таблице 1

10. Таблица 1
1. Тезис
Участник четко формулирует тезис, то есть высказывается следующим образом:
1) поддерживает предложенную мысль (путем повторения или перефразирования темы собственного высказывания);
2) опровергает (отрицает) мысль;
3) предлагает компромиссный вариант, например: «Я не совсем разделяю предложенную мысль и считаю, что…»;
4) приводит два тезиса, аргументируя каждый отдельно, то есть одновременно и поддерживает, и опровергает предложенную мысль 2
баллы

11. 1. Тезис (продолжение) 1 бал
Таблица 1
1. Тезис (продолжение)
Участник только указывает: «Я соглашаюсь / не соглашаюсь с предложенной мыслью», не раскрывая
содержания темы.
В работе отсутствует четкая формулировка тезиса, но есть предложения и ключевые слова,
свидетельствующие о понимании темы
1 бал

12. Участник не формулирует тезис.
Таблица 1
1. Тезис (продолжение)
Участник не формулирует тезис.
Участник формулирует тезис, не отвечающий предложенной теме.
В работе отсутствуют предложения и ключевые слова, свидетельствующие о понимании темы
баллов

13. Один из аргументов не соответствует сформулированному тезису:
2. Аргументы
Участник приводит не менее двух уместных аргументов для подтверждения высказанного тезиса, связанных
с примерами:
2 тестовых балла
Участник приводит не менее одного уместного аргумента для подтверждения высказанного тезиса.
Аргументы дублируют друг друга, то есть второй аргумент перефразирует содержание первого.
Один из аргументов не соответствует сформулированному тезису:
1 тестовый балл
Участник не приводит аргументов для подтверждения высказанного тезиса либо аргументы неуместны:
0 тестовых балла

14. 3а. Пример из литературы или других видов искусства
3а. Пример из литературы или других видов
искусства
Участник приводит не менее одного уместного примера из художественной литературы или других видов искусства.
Указаны проблема, затронутая в произведении, художественный образ, раскрывающий проблему,
название и автор произведения, может быть приведена цитата из произведения.
Участник может ссылаться на факты из биографии автора, если эти факты касаются его творчества –
2 балла
Отсутствует мотивация приведения именно этого примера, либо пример содержит фактические ошибки, или
пример не конкретизирован через художественный образ:
1 тестовый балл
Пример из художественной литературы или других видов искусства отсутствует или неуместен:
0 тестовых баллов

15. 3б. Пример, являющийся историческимфактом или случаем из жизни
Участник приводит не менее одного уместного примера либо из истории, либо из общественно-
политической жизни, либо из собственной жизни.
Участник может ссылаться на факты из биографии автора произведения, если эти факты не касаются
его творчества:
2 балла
Пример содержит фактические ошибки:
1 тестовый балл
Пример из истории, общественно-политической или собственной жизни отсутствует или неуместен:
0 тестовых баллов

16. 4. Логичность, последовательность 2 балла 0 тестовых баллов
В работе нет нарушений причинно-следственных связей.
Участник структурирует работу по абзацам:
2 балла
В работе имеются нарушения причинно-следственных связей:
1) тезис расположен после аргументов;
2) тезис разорван аргументом;
3) аргументы расположены после примера, иллюстрирующего его:
1 тестовый балл
Логика изложения отсутствует:
0 тестовых баллов

17. аргументов и примеров:
5. Вывод
Вывод соответствует предложенной теме и органически следует из сформулированного тезиса,
аргументов и примеров:
2 балла
Вывод частично соответствует тезису или не связан с аргументами и примерами.
Участник неправильно формулирует вывод, например, начиная его словами «я считаю»:
1 тестовый балл
Вывод отсутствует, не соответствует тезису, не связан с аргументами и примерами или является другим
тезисом:
0 тестовых баллов

18. Языковое оформление собственного высказывания оценивается по двум критериям (6а и 6б), изложенным в таблицах 2 и 3.
Критерий
Количество ошибок
Баллы
6а.
Орфография и
пунктуация
0 – 1 4
2 – 6 3
7 – 11 2
12 – 16 1
17 и более
Критерий
Количество ошибок
Баллы
6б.
Лексика, грамматика
и стилистика
0 – 1 4
2 – 4 3
5 – 7 2
8 – 10 1
11 и более

19. К негрубым относятся следующие ошибки:
При оценивании орфографической и пунктуационной нормативности работы две негрубые ошибки соответствуют одной грубой.
К негрубым относятся следующие ошибки: 1
исключения из всех правил 2
написание большой буквы в сложных собственных наименованиях; 3
слитное или раздельное написание приставок у наречий, образованных от сочетания существительных, прилагательных, местоимений с предлогами 4
использование одних знаков препинания вместо других
Animated SmartArt chevron list
Select the first stop on the slider, and then do the following:
(Basic)
Click the button next to Color, and then under Theme Colors select Olive Green, Accent 3 (first row, sixth option from the left).
To reproduce the SmartArt on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Chevron List (seventh row, second option from the left), and then click OK to insert the graphic into the slide.
Select the last stop on the slider, and then do the following:
To create a fourth chevron, select the third chevron at the bottom of the graphic, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click the arrow next to Add Shape, and select Add Shape After.
To add bullets for the fourth chevron, select the fourth chevron, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click Add Bullet.
To enter text, select the SmartArt graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each level. (Note: In the example slide, the first-level text are the chevrons with “One,” “Two,” and “Three.” The second-level text are the “Supporting Text” lines.)
Select the third from the top rectangle with bulleted text, and then do the following:
On the slide, select the SmartArt graphic and drag the right center sizing handle to the right edge of the slide.
With the SmartArt graphic still selected, on the Design Tab, in the Themes group, click Colors, and then under Built-In select Median. (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)
With the SmartArt graphic still selected, under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click the More arrow, and then under 3-D select Inset (first row, second option from the left).
Also under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click Change Colors, and then under Colorful select Colorful Accent Colors (first option from the left).
To reproduce the chevron effects on this slide, do the following:
Press and hold CTRL, and select all four chevrons in the SmartArt graphic. On the Home tab, in the Font group, in the Font list select Franklin Gothic Medium Cond, and then in the Font Size box select 28 pt.
Click the button next to Color, and then under Theme Colors select Gold, Accent 4 (first row, seventh option from the left).
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Text Box in the left pane, and in the Text Box pane do the following:
Under Text layout, in the Vertical alignment list select Bottom.
Under Internal margin, do the following:
In the Left box enter 0”.
In the Right box enter 0”.
In the Bottom box enter 0”.
In the Top box enter 0.6”.
To reproduce the rectangle effects on this slide, do the following:
Press and hold CTRL, and the four rectangles (with bulleted text). On the Home tab, in the Font group, do the following:
In the Font list, select Franklin Gothic Book.
Select the fourth from the top rectangle with bulleted text, and then do the following:
In the Font Size box, enter 21 pt.
In the Font Color list, under Theme Colors select White, Background 1 (first row, first option from the left).
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following:
Click Gradient fill.
In the Type list, select Linear.
Click the button next to Direction, and then click Linear Down (first row, second option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors select Black, Text 1 (first row, second option from the left).
Click the button next to Color, and then under Theme Colors select Green, Accent 5 (first row, 8th option from the left).
In the Transparency box, enter 100%.
Select the last stop in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 45%.
Also in the Format Shape dialog box, click Shadow in the left pane, and in the Shadow pane, in the Presets list select No Shadow.
Also in the Format Shape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Bevel, in the Top list select No Bevel.
Select the first from the top rectangle with bulleted text, and then do the following:
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and in the Line Color pane do the following:
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Animation Pane.
Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow on the Effects Gallery and under Entrance, click Grow & Turn.
In the Animation group, click Effect Options, and under Sequence, click One by one.
In the Timing group, in the Duration list, enter
Under Gradient stops, click Add or Remove until two stops appear on the slider. Customize the gradient stops as follows:
In the Animation Pane, click the double arrow to expand the contents of the list. Press and hold CTRL, and select the second, fourth, sixth, and eighth effects (bullets’ grow & turn entrance effects), and then do the following:
Select Stop 1 on the slider, and then do the following:
In the Animation group, click the More arrow on the Effects Gallery and then click More Entrance Effects. Under Basic, click Peek In, and then click OK.
Click the button next to Color, and then under Theme Colors select Orange, Accent 2 (first row, sixth option from the left).
With the four peek in entrance effects still selected, in the Timing group, do the following:
In the Start list, select With Previous.
In the Duration list, select
Select the first grow & turn entrance effect in the list, and in the Timing group, in the Start list, click With Previous.
Select Stop 2 on the slider, and then do the following:
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
In the Transparency box, enter 0%.
Select the second from the top rectangle with bulleted text, and then do the following:
In the Position box, enter 20%.
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 25% (fourth row, first option from the left).
Select the second stop on the slider, and then do the following:

20. К негрубым относятся следующие ошибки:
При оценивании орфографической и пунктуационной нормативности работы две негрубые ошибки соответствуют одной грубой.
К негрубым относятся следующие ошибки: 5
сложные случаи правописания оборотов (не кто иной (другой) / никто иной (другой); не что иное (другое) / ничто иное (другое)); 6
пропуск одного из соединительных знаков препинания или нарушение их последовательности; 7
неправильный перенос слов; 8
замена русских букв украинскими
Animated SmartArt chevron list
Select the first stop on the slider, and then do the following:
(Basic)
Click the button next to Color, and then under Theme Colors select Olive Green, Accent 3 (first row, sixth option from the left).
To reproduce the SmartArt on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Chevron List (seventh row, second option from the left), and then click OK to insert the graphic into the slide.
Select the last stop on the slider, and then do the following:
To create a fourth chevron, select the third chevron at the bottom of the graphic, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click the arrow next to Add Shape, and select Add Shape After.
To add bullets for the fourth chevron, select the fourth chevron, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click Add Bullet.
To enter text, select the SmartArt graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each level. (Note: In the example slide, the first-level text are the chevrons with “One,” “Two,” and “Three.” The second-level text are the “Supporting Text” lines.)
Select the third from the top rectangle with bulleted text, and then do the following:
On the slide, select the SmartArt graphic and drag the right center sizing handle to the right edge of the slide.
With the SmartArt graphic still selected, on the Design Tab, in the Themes group, click Colors, and then under Built-In select Median. (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)
With the SmartArt graphic still selected, under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click the More arrow, and then under 3-D select Inset (first row, second option from the left).
Also under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click Change Colors, and then under Colorful select Colorful Accent Colors (first option from the left).
To reproduce the chevron effects on this slide, do the following:
Press and hold CTRL, and select all four chevrons in the SmartArt graphic. On the Home tab, in the Font group, in the Font list select Franklin Gothic Medium Cond, and then in the Font Size box select 28 pt.
Click the button next to Color, and then under Theme Colors select Gold, Accent 4 (first row, seventh option from the left).
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Text Box in the left pane, and in the Text Box pane do the following:
Under Text layout, in the Vertical alignment list select Bottom.
Under Internal margin, do the following:
In the Left box enter 0”.
In the Right box enter 0”.
In the Bottom box enter 0”.
In the Top box enter 0.6”.
To reproduce the rectangle effects on this slide, do the following:
Press and hold CTRL, and the four rectangles (with bulleted text). On the Home tab, in the Font group, do the following:
In the Font list, select Franklin Gothic Book.
Select the fourth from the top rectangle with bulleted text, and then do the following:
In the Font Size box, enter 21 pt.
In the Font Color list, under Theme Colors select White, Background 1 (first row, first option from the left).
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following:
Click Gradient fill.
In the Type list, select Linear.
Click the button next to Direction, and then click Linear Down (first row, second option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors select Black, Text 1 (first row, second option from the left).
Click the button next to Color, and then under Theme Colors select Green, Accent 5 (first row, 8th option from the left).
In the Transparency box, enter 100%.
Select the last stop in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 45%.
Also in the Format Shape dialog box, click Shadow in the left pane, and in the Shadow pane, in the Presets list select No Shadow.
Also in the Format Shape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Bevel, in the Top list select No Bevel.
Select the first from the top rectangle with bulleted text, and then do the following:
On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and in the Line Color pane do the following:
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Animation Pane.
Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow on the Effects Gallery and under Entrance, click Grow & Turn.
In the Animation group, click Effect Options, and under Sequence, click One by one.
In the Timing group, in the Duration list, enter
Under Gradient stops, click Add or Remove until two stops appear on the slider. Customize the gradient stops as follows:
In the Animation Pane, click the double arrow to expand the contents of the list. Press and hold CTRL, and select the second, fourth, sixth, and eighth effects (bullets’ grow & turn entrance effects), and then do the following:
Select Stop 1 on the slider, and then do the following:
In the Animation group, click the More arrow on the Effects Gallery and then click More Entrance Effects. Under Basic, click Peek In, and then click OK.
Click the button next to Color, and then under Theme Colors select Orange, Accent 2 (first row, sixth option from the left).
With the four peek in entrance effects still selected, in the Timing group, do the following:
In the Start list, select With Previous.
In the Duration list, select
Select the first grow & turn entrance effect in the list, and in the Timing group, in the Start list, click With Previous.
Select Stop 2 on the slider, and then do the following:
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
In the Transparency box, enter 0%.
Select the second from the top rectangle with bulleted text, and then do the following:
In the Position box, enter 20%.
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 25% (fourth row, first option from the left).
Select the second stop on the slider, and then do the following:

21. Увага!
Негрубу орфографічну й негрубу пунктуаційну помилки не сумують і не зараховують як одну грубу. 1
Систематичне порушення норм милозвучності (три і більше випадків порушення на одне з правил: у–в, і–й–та) рахують як одну
стилістичну помилку. 2
Animated SmartArt vertical list
(Intermediate)
To reproduce the animation effects on this slide, do the following:
On the Animation tab, in the Animation group, click Animation Pane.
To reproduce the SmartArt effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Effects. In the Change Entrance Effect dialog box, under Exciting select Curve Up, and click OK.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Block List (sixth row, first option from the left), and then click OK to insert the graphic into the slide.
In the Animation group, click Effect Options, and under Sequence, click One by One.
In the Timing group, do the following:
Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each of the rectangles.
On the Timing tab, in the Start list, select After Previous.
On the Timing tab, in the Duration list, select
Press and hold CTRL, and select each of the second-level rectangles on the slide. Drag the left sizing handle of one of the second-level rectangles to the left 0.5” to increase the width of the second-level rectangles. Note: The first-level rectangles (rounded rectangles) will decrease in width at the same time.
In the Animation Pane, click the double arrow under the curve up entrance effect (first effect) to expand the list of effects.
Press and hold CTRL, and select the second, fourth, and sixth effects (curve up entrance effects). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Entrance Effects. In the Change Entrance Effect dialog box, under Basic, select Peek In, and click OK.
Select the SmartArt graphic. Under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click the More arrow at the SmartArt Styles gallery, and under Best Match for Document select Intense Effect (fifth option from the left).
Press and hold CTRL, and then select each of the first-level rectangles (rounded rectangles) in the SmartArt graphic.
In the Animation group, click Effect Options, and under Direction, click From Top.
Under SmartArt Tools, on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Fill, and under Theme Colors select White, Background 1, Darker 25%. (fourth row, first option from the left).
In the Start list, select With Previous.
In the Duration list, select
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select White, Background 1 (first row, first option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background, and then click Format Background.
In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Select the top, second-level rectangle in the SmartArt graphic.
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3. (first row, seventh option from the left).
In the Type list, select Radial.
In the Direction list, click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows:
Select the center, second-level rectangle in the SmartArt graphic.
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 40% (fourth row, seventh option from the left).
Select the first stop on the slider, and then do the following:
In the Position box, enter 33%.
Select bottom, second-level rectangle in the SmartArt graphic.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, the first option from the left).
Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left).
Press and hold CTRL, and select each of the second-level rectangles.
Select the last stop on the slider, and then do the following:
On the Home tab, in the Font group, in the Font Color list select White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
Under SmartArt Tools, on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Effects, then point to Shadow, and under Outer, click Offset Diagonal Bottom Right.