1. F&J SPECIALTY PRODUCTS, INC.
Ruggedized Cellular Phone
Data Interface System
For
F&J Air Sampler Systems
Rev.: 13 August 2018

2. Ruggedized Cellular Phone Data Interface System
for
Digital Flow Meter
Air Sampler Systems
Global
Air Sampler Systems
F&J P/N: CASRPS-DFM
F&J P/N: CASRPS

3. Ruggedized Cellular Phone Data Interface System
Phone Overview

4. Ruggedized Cellular Phone Data Interface System
Phone Overview

5. Ruggedized Cellular Phone Data Interface System
Phone Overview

6. Ruggedized Cellular Phone Data Interface System
GENERAL DESCRIPTION:
The Casio G’ZOne based F&J air sampler Data Interface system is a ruggedized phone running a custom application including a Data Concentrator electronic module and a power supply. The phone is constantly charged through the USB connector.
The F&J Data Interface system permits connection to an air sampler system whereby measurement data can be sent periodically via and/or SMS. Additionally, air sampler status messages are sent when an unexpected event occurs, or an alarm is triggered or cleared.
The setup feature in the F&J Data Application allows the configuration of the server, up to three recipient addresses and the selection of engineering units. The operator can also set up the phone to send SMS text messages to up to three recipients.
Data can also be sent by or text on an operator selectable frequency.
The Casio G’ZOne cellular phone is mounted in an enclosure external to the main air sampler enclosure (May vary for some F&J air sampling models) while also has a locking hasp for a padlock to provide some measure of security.

7. Ruggedized Cellular Phone Data Interface System
Ruggedized Cell Phone System Features:
Network Operation: CDMA, GSM or Wi-Fi
server settings
SMTP Server
SMPT Port
Sender Address
Sender Password
SMS Text Settings
Operator Selectable Engineering Units
Flow: SCFM, SLPM, SCCM, sm3/hr, Sm3/m
Temperature: °C, °F
Pressure: Atm, InHg, mmHg, bar, kPa, mbar, or hPa
Operator Selectable E mail Frequency: 10 seconds to 12 hours
Operating Temperature: -30°C to 60°C (-22°F to 140°F)
Operating Humidity: 95%; non-condensing
Certification: MIL-STD-810G
Main Screen

8. Ruggedized Cellular Phone Data Interface System
Ruggedized Cellphone Averaging and Alarm Notification Examples :
Averaging Notification
Flow Alarm Notification

9. Data Concentrator Specifications
Power supply: 9V DC, minimum 800Ma
Power connector: Barrel connector jack, 2.0mm ID, 5.5mm OD, center positive
Power protection: Reverse polarity protected
Instrument connections: Up to 4 bidirectional RS-232 (RX, TX, GND)
RS-232 connectors: 9 position D-Sub male (DB9M)
Phone connection: USB 2.0 (host/OTG)
USB capability: Data and charge
USB connector: Micro USB
Mating USB cable: Micro-A OTG (must use supplied red cable, regular USB cable
will not work)
Power indicator: Red LED
Operation indicator: Yellow LED (phone is connected and application is running)
Processor: 16 bit embedded flash microcontroller
Operating temperature: -25°C to +65°C
Panel size: 3.0" x 3.9"
Main Screen 

10. Data Concentrator Specifications
Main Screen 

11. Ruggedized Cellular Phone Data Interface System
The ruggedized cellular phone data interface system can be utilized with either low volume or high volume air sampler systems.
Low Volume Air Sampler

12. Ruggedized Cellular Phone Data Interface System
High Volume Air Sampler

13. Ruggedized Cellular Phone Data Interface System

14. Ruggedized Cellular Phone Data Interface System