1. Professor Stear Spring 2017 Second Start
ENGR 1201
Professor Stear
Spring 2017 Second Start

2. ENGR 1201 Licensure as a professional engineer (PE)
Elements of Engineering Analysis
Attendance

3. Licensure as a professional engineer (PE)
ENGR 1201
Licensure as a professional engineer (PE)
Education
Examination
Experience
Documentation

4. Engineering Licensure - Education

5. Engineering Licensure - Exam

6. Engineering Licensure - Experience

7. Engineering Licensure – Documenting Experience

8. Elements of Engineering Analysis
ENGR 1201
Elements of Engineering Analysis
Engineering Graphics
Unit Analysis
Problem Solving
Spreadsheets

9. ENGR 1201 Engineering Graphics CADD/3D Printing Sketching Lettering
Scales
Orthographic Projection

10. Computer-aided Drafting and Design
ENGR 1201
CADD
Computer-aided Drafting and Design

11. 3D Printing ENGR 1201 Additive Manufacturing Rapid Prototyping
Manufacturing of the Future

12. Sketching

13. Lettering

14. Scales

15. Orthographic Projection

16. The Glass Box
One way to understand the standard arrangement of views on the sheet of paper is to envision a glass box.
If planes of projection were placed parallel to each principal face of the object, they would form a box.

17. Unfolding the Glass Box
To organize the views of a 3D object on a flat sheet of paper, imagine the six planes of the glass box being unfolded to lie flat.
Note the six standard views (front, rear, top, bottom, right side, left side).

18. The Glass Box Unfolded
Lines extend around the glass box from one view to another on the planes of projection. These are the projectors from a point in one view to the same point in another view.

19. Transferring Depth Dimensions
The depth dimensions in the top and side views must correspond point-for-point. When using CAD or instruments, transfer these distances accurately.
You may find it convenient to use a 45° miter line to project dimensions between top and side views.
You can transfer dimensions between the top and side views either with dividers or with a scale.

20. ENGR 1201 – Unit Analysis

21. ENGR 1201 – Unit Analysis

22. ENGR 1201 – Problem Solving Need – Know – How - Solve

23. ENGR 1201 – Spreadsheets

24. Homework wk of 2/24 Handouts Chap 2 exercises ENGR 1201 Scales
Sketching
Ortho
Lettering
Chap 2 exercises
8,10,14,
16,17,21,
30,32,42