1. ROBUST

2. What makes a Robust luminaire?
We light spaces to enhance human well-being. Lighting adverse area’s is no different.
One of the core principals of enhancing human well being is to provide safety.

3. What makes a Robust luminaire?
In adverse areas providing safety means the use of robust luminaires that provide the right light at all times.
These luminaires must be able to continuously operate despite extreme physical attack, whilst remaining maintenance free as long as possible.

4. What makes a Robust luminaire?
When it comes to a luminaires ability to resist physical attack the standard we like to use is IEC (2002).
Given as an IK rating between 00 to 10, where 10 is the highest rating.

5. Testing to IK10
The hammer’s weight and the joules are specified (mass over distance) as is the radius of the striking area.
Standard requires 5 strikes to the weakest point.
IK10 TEST

6. Testing to IK10
Even though we always test at the fittings weakest point, 20 joules, or 2kg at 1m distance, is simply not enough to resist many physical attacks .
For this reason we have tested far beyond the norm of what is considered ‘vandal resistant’.
EXCEEDING THE IK10 TEST

7. What makes a Robust luminaire?
Built to last:
Polyester Powder coat over Bonderite providing a corrosion resistant finish.
Stainless safety screws (torx with centre pin) to prevent vandalism and unwanted access.
Burns test diffusers in prison cell fittings. Our diffusers will resist extended periods of naked flame attack, preventing the risk of self-harm occurring.

8. What makes a Robust luminaire?
Maintenance Free:
Choice of LED and fluorescent sources. We design our luminaires for optimum thermal performance and therefore optimal life of lamps and components.
Removable gear trays with plug and play connectors are standard allowing easy access for maintenance and retrofitting new boards into older fittings.

9. TUSCAN
Three models- Surface, 30 degree angled and 45 degree angled
Available in Black or Anthracite polyester powder coat.

10. TUSCAN
T5/ LED.
IP 65 | IK 10/150 J
Heavy gauge steel body
Clear patterned polycarbonate
Removable tray plug & socket connector block.
Provision for conduit entry in ends

11. FLAIR SQUARE
T5 / LED.
IP 65 | IK 10/150 J
Toughened polycarbonate lens.
Extruded aluminum body and die cast end caps.
Low brightness louver in symmetrical and asymmetrical distributions.
Removable tray with fused plug & socket connector block.

12. FLAIR SQUARE
LED is available in both louvered (high efficiency) or lenses (high visual comfort) versions.
T5 versions offer a low brightness louvre in symmetrical and asymmetrical distributions.
Standard in aluminium grey.

13. PARKALUX
T5.
IP 55 | IK 10/150 J
Zinc-coated steel body.
Clear patterned polycarbonate diffuser. Removable tray with plug & socket connector block.
Provision for conduit entry in back and at ends.

14. MONITOR
T5.
IP 65 | IK 10/150 J
Die cast aluminium body finished.
Clear prismatic polycarbonate diffuser.
Removable tray with plug & socket connector block.

15. BUCCANEER
LED.
IP 65 | IK 10/150 J
Die cast aluminium body.
Injection molded clear frosted polycarbonate diffuser.
Removable gear tray with plug & socket connector block.

16. QUANTUM & QUADRIGA
LED.
IP 65 | IK 10/150 J
Die cast aluminium body.
Opal polycarbonate diffuser
Removable tray with plug & socket connector block.
Provision for conduit entry in back and at sides.

17. PANTHEON
LED and Metal Halide.
IP 65 | IK 10/150 J
Aluminium reflector and control lens for efficient, even distribution of light.
Die cast aluminium body.
Clear prismatic polycarbonate diffuser
Hinged overhead catch.
Removable tray with plug & socket connector block.

18. ROBUST