2. LDC borstplätering

3. LDC borstplätering LDC Portable Electroplating
Cold process: used at room temperature, no stress or adjustments because of termal distorsion.
To tolerance: normaly no machining required
Quick metal build-up: 0,05 mm in min.
Plating: on all conductive materials, cast iron, stainless, mild steel, copper, chrome etc
Dense deposits: no or very little porosity in most coatings
Many differens metals: nickel, gold, silver, copper, cobolt, zinc and alloys.
Excellent bonding: molecular bonding results in very god adhesion, all coatings can be machined, ground or polished.
Mobile equipment: the repair can be done on site

4. LDC borstplätering
Retainingrings, part of generator for powerstation, silverplated.

5. LDC borstplätering
Retainingrings, part of generator for powerstation, silverplated.

6. LDC borstplätering
Bus bar, contact rods for the power generating industry, gold and silver coated contact-surfaces for increased conductivity.

7. LDC borstplätering On-site plating job, shafts to be restored

8. LDC borstplätering
Electric rotor with bad / worn bearing / seal areas repaired to original size.

9. LDC borstplätering
Electric rotor with bad / worn bearing / seal areas repaired to original size.

10. LDC borstplätering
Endcover of cast iron or Aluminium with worn /mismachined bearing seat corrected by LDC nickel.

11. LDC borstplätering
Worn shaft on a turbine wing in power plant, to be repaired.

12. LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se
Onsite repair of 2 
pieces of seal 
surfaces on a compressor 
shaft due to 
local wear damage. Built with the LDC-2904 Copper Hi-speed 0.5 mm.

13. LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se
Finished compressor 
shaft to its original dimensions, 
with a hard, dense 
top layer of the LDC-2874 Nickel Tungsten. With a hardness of 58 Hrc

14. LDC borstplätering
Bearing journals and sealareas can be repaired on a Turboshaft
Highly polished cylinders with damages is corrected by LDC plating

15. Propellershaft sleeve repaired on-site in England by LDC
LDC borstplätering
Propellershaft sleeve repaired on-site in England by LDC

16. LDC borstplätering
Documented view of enlarged LDC-2807 Nickel layer, as part of quality control.

17. LDC borstplätering Typical document of approval for LDC in Sweden.