1. BRIEFING ON PSM 2 Sem / FACULTY OF MECHANICAL & MANUFACTURING ENGINEERING UNIVERSITI TUN HUSSEIN ONN MALAYSIA

2. Content FKMP PSM Committee General Information Forms Important Date
PSM Seminar
PSM 2 Process Flow
Thesis Submission
Claim / PLO Survey

3. FKMP PSM Committee 2017/2018 A/PROF. DR SALIHATUN BINTI MD SALLEH
DEPUTY DEAN (ACADEMIC)
PSM COORDINATOR
DR MOHD NORIHAN BIN IBRAHIM
E KAMPUS INDUK /
JKBR
A/PROF. DR HAMIMAH BINTI ABD RAHMAN E
JKM
DR. ZAMRI BIN NORANAI
D1-210
JKT
DR AZWAN BIN SAPIT
D1 – 208
JKA
DR WAN NUR AZRINA BINTI WAN MUHAMMAD C
TN HJ. SAIFUL FAZAD BIN AHMAD
PUSAT SUMBER, FKMP
BLOCK C6
JKPI
DR. ZAZULI BIN MOHID
D1-314

4. 3. GENERAL INFORMATION
All ANNOUNCEMENT will be made via official FKMP facebook or psm website:

5. Forms D8b Borang Penilaian Seminar – Panel
D6b Borang Penilaian Draf Akhir – Penyelia
D7 Borang Pengesahan Penyerahan Kertas Kerja Seminar
D9 Borang Penyerahan Tesis
Borang Pengesahan Status Tesis – Dalam Tesis
D5 Borang Tuntutan PSM

6. Komen PANEL Contoh: Borang Penyerahan tesis
Lampiran perlu dinyatakan komen dari panel dan tindakan
Contoh:
Komen
Tindakan
Format penulisan tajuk rajah perlu dibaiki
Penulisan tajuk rajah telah dibaiki dalam tesis
Penggunaan graf garis kurang sesuai bagi Rajah 4.6
Graf yang bersesuaian telah ditukar pada muka surat 60

7. YOUR PROJECT YOUR REPONSIBILITY !!
IMPORTANT DATE
Always refer to PSM 2 Work Schedule
Don’t do last minute work
YOUR PROJECT YOUR REPONSIBILITY !!

8. PSM Seminar
Your supervisor has their authority to bar you from attending the seminar based on your attendance. Ensure that they sign your report & seminar paper as approval before submission to the panel.
Refer to Seminar Schedule daily as there is always changes.
Date for Seminar PSM;
(16/12/18 – 20/12/18)
Not attending seminar= FAIL

9. Plagiarism
Plagiarism is defined as an act of fraud. It involves both stealing someone else's work and lying about it afterward.
Student need to SUBMITT For Plagiarism Checking Using “Turn It In” Software BEFORE SEMINAR PRESENTATION
(WEEK 10 – WEEK 14).

10. PSM 2 Process Flow Start Prepare thesis draft Discuss with SV
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
(W1 – W10)
(W1 – W10)
(W1 – W10)
Preliminary Plagiarism Check (W10-W14)
(W15)
End
(W16 – W17)
(W16 – W19)
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form

11. Thesis Submission Student who FAIL to submit their thesis by
Minimum 3 copy (supervisor, 2 copy submit at Pusat Sumber, FKMP)
CD should content:
All thesis content according to chapter (either by chapter or whole thesis)
Seminar paper
Appendix (data, figure, calculation, etc.)
Write name, matrix number and project title on the CD
Student who FAIL to submit their thesis by
17 January2019 will FAIL this course.

12. Others Use D5 form – Borang tuntutan peruntukan PSM
Claim once only before end of November 2018
Template of Front Page PSM 2 REPORT
Information Distribution
FKMP FYP website
FKMP Facebook
PSM Notice boards
Whatsapp, , etc.

13. AMENDMENT on Proses Pelaksanaan PSM UTHM.
(a). Those who fail PSM1 twice need to repeat PSM1 under different Supervisor, Change Title/Topics of PSM (b). Those who fail 2x of PSM2, if the report is prepared & need for the correction, student need to do so & the student may be considered to obtained at least grade “D” (c). Those who fail 2x PSM2, the 3rd time of PSM2 registration (repeat) will be monitored by DEAN or TDAA. (d). Those who fail PSM2 for 3 consecutive semesters (without strong reason/justification) will be graded as FAIL and TERMINATED. All of the above were effectively implemented starting on SEM /2018.

14. Good Luck &
All the BEST