1. Harvey Cement Products, Inc. 16030 Park Avenue, Harvey, Illinois 60426 Phone: 708-333-1900 Fax: 708-333-1910 Harvey Cement Products, Inc. 16030 Park Avenue, Harvey, Illinois 60426 Phone: 708-333-1900 Fax: 708-333-1910

2. Turlington Series Thru-Wall Brick Brina Series Ashlar Pattern Brina Series Ashlar Pattern SavannaStone® 2FT Standard Units Turlington Series Thru-Wall Block SavannaStone® Custom Medallions

3. ADVANTAGE #1: Virtually Limitless Design Capabilities Custom mold designers utilize wood, fiberglass, and plaster to create just about any shape and size possible within the cast stone industry: arches, quoins, dentils, panels, medallions, etc. Color can be customized to fit your palette. 2FT standard sizes can be manufactured in the same mix design as custom units, creating a uniform color throughout your building. ADVANTAGE #1: Virtually Limitless Design Capabilities Custom mold designers utilize wood, fiberglass, and plaster to create just about any shape and size possible within the cast stone industry: arches, quoins, dentils, panels, medallions, etc. Color can be customized to fit your palette. 2FT standard sizes can be manufactured in the same mix design as custom units, creating a uniform color throughout your building.

4. ADVANTAGE #2: Lowest Water Absorption Rate in the Industry When tested to the specific cast stone standard for absorption [C1195], SavannaStone® is unequaled. Our analysis has shown that a lower water absorption cannot be obtained without sacrificing the high quality bond with mortar that our product maintains. Due to our industry low 1.9% to 2.6% tested absorption rate, SavannaStone® was able to exceed the freeze/thaw loss allowance test by a hefty 40% margin. This is particularly comforting in cold weather climate areas such as Illinois. ADVANTAGE #2: Lowest Water Absorption Rate in the Industry When tested to the specific cast stone standard for absorption [C1195], SavannaStone® is unequaled. Our analysis has shown that a lower water absorption cannot be obtained without sacrificing the high quality bond with mortar that our product maintains. Due to our industry low 1.9% to 2.6% tested absorption rate, SavannaStone® was able to exceed the freeze/thaw loss allowance test by a hefty 40% margin. This is particularly comforting in cold weather climate areas such as Illinois.

5. ADVANTAGE #3: The Dry Tamp Production Process Process offers a smooth consistent finish which is less porous/permeable than other types of manufactured and natural stone. This helps control color variance. PSI strength can be maintained at higher levels than quarried limestones. Dry tamp provides the most natural-looking cast stone result possible without unsightly bug holes, veining, or large visible aggregate. ADVANTAGE #3: The Dry Tamp Production Process Process offers a smooth consistent finish which is less porous/permeable than other types of manufactured and natural stone. This helps control color variance. PSI strength can be maintained at higher levels than quarried limestones. Dry tamp provides the most natural-looking cast stone result possible without unsightly bug holes, veining, or large visible aggregate.

6. *All cast stone should be tested to ASTM C1364 in all circumstances. ASTM C90 reports from our competitors are invalid. While we easily pass all ASTM C90 tests, they are designed for CMU or block shapes and sizes such as our Turlington® Thru Wall products. Water Absorption Test C1195

7. *All cast stone should be tested to ASTM C1364 in all circumstances. ASTM C90 reports from our competitors are invalid. While we easily pass all ASTM C90 tests, they are designed for CMU or block shapes and sizes such as our Turlington® Thru Wall products. Compression Test C1194

8. ArchesArches

9. ArchesArches

10. ArchesArches

11. ArchesArches

12. Full Facades Combining Custom & Standard for Value Engineering

13. Full Facades Combining Custom & Standard for Value Engineering

14. Full Facades Combining Custom & Standard for Value Engineering

15. Full Facades Combining Custom & Standard for Value Engineering

16. Standard 2FT – Combined with Custom Same Exact Mix Design Used for Each Process

17. Standard 2FT – Combined with Custom Same Exact Mix Design Used for Each Process

18. Decorative Jambs/Headers

20. Custom Engraving

21. Address Stones Multiple fonts and colors available

22. Custom Cornice/Panel

23. Decorative Dentils/Bands Fully Customizable Within ASTM Standards

24. Radius Walls and Columns

25. 2FT Rockface Base System Low Water Absorption Protects Against Salt/Water Damage

26. Typical 2FT Base Stone Rockface, Smooth, Bullnose

27. Full Rockface Corner Returns

28. CAD SHOP DRAWINGS Showing Plan Dimensions, Placement in Elevation, and Profile Details - Included at No Charge

29. For extensive information on our products, including test results and specification sheets. Email sales@harveycement.com for more information.sales@harveycement.com