1. eCall: Creating momentum towards the networked car
11/14/2018

2. What is Pan European eCall ?
Pan European eCall is a further development of traditional emergency call using the emergency number 112 and is thus free of charge
Pan European eCalls are either generated manually or automatically
When activated a voice connection with the most appropriate Public Safety Answering Point (PSAP) is established
At the same time a minimum set of data (MSD) is sent using the voice channel to the PSAP operator receiving the voice call
The MSD contains vital data such as the current GPS location coordinates, incident time and vehicle description.
MSD = minimum set of data
PSAP = public safety answering point
Source: European Commission
11/14/2018

3. Pan European eCall, Technical Bits
Whereas the implementation of the Pan European eCall service is at European level, a harmonised approach respecting the different national implementations, interoperability and cross border continuity, the eCall service will use the common European standards as defined by ETSI and CEN*
Pan European eCall transmission is piggybacking on the standards of traditional emergency calls (TS12). This ensures maximum Grade of Service
For the sake to be able to distinguish traditional emergency calls from eCalls, 3GPP/ ETSI standardized the “eCall Flags” (ETSI TS / 3GPP TS )
*a List of relevant eCall Standards is contained in the backup
11/14/2018

4. What is managed eCall ?
Managed eCalls are proprietary solutions which from a customers perspective provide basically an equivalent service
Managed eCalls are part of a bundle services (Concierge Service, Breakdown Service…)
Managed eCalls are based on common numbers (not 112)
When activated a voice connection to a service centre is established
From there:
Emergency calls are forwarded to the appropriate PSAP
Emergency related data is sent either via SMS or proprietary modems using the voice channel
11/14/2018

5. The regulatory background
A set of proposed legal acts shall ensure the deployment of the 112-based eCall service by 1 October 2015:
A proposal for a regulation on the eCall in-vehicle system concerning type-approval requirements for the deployment of the eCall in-vehicle system. The purpose of this proposal is to introduce a requirement for fitting an eCall in-vehicle system in the EC motor vehicle type-approval system.
The Commission Recommendation 2011/750/EU of 8 September 2011 on support for an EU-wide eCall service in electronic communication networks for the transmission of in-vehicle emergency calls based on 112 (‘eCalls’)
A Commission Delegated Regulation (EU) No 305/2013 of supplementing Directive 2010/40/EU of the European Parliament and of the Council with regards to the harmonised provision for an interoperable EU-wide eCall
11/14/2018

6. Deutsche Telekom engagement for eCall
Proactive in relevant Standardization Bodies and at political level
Engagement in various Field Trials
All mobile Networks in the DT Group will have the eCall flags* be implemented by October 2015
* (ETSI TS / 3GPP TS )
11/14/2018

7. E-Mail: martin.buechter@telekom.de www.telekom.com
Martin Büchter
Deutsche Telekom AG
Group Technology
Landgrabenweg 151, Bonn
(Tel.)
(Mobil) 7
11/14/2018

8. Backup
11/14/2018

9. eCall Standards (1) Title Description Reference 11/14/2018
3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; eCall Data Transfer; In-band modem solution; Characterisation Report (Release 8)
eCall Data Transfer – Characterisation Report
3GPP TS
ETSI TS
eCall Data Transfer – Technical Report - Characterisation Report
3GPP TR
ETSI TR
Road transport and traffic telematics — eSafety — eCall minimum set of data - Draft EN
eCall minimum set of data
CEN EN 15722
Intelligent transport systems — eSafety - Pan European eCall – Operating requirements
Pan European eCall Operating Requirements
CEN EN 16072
Intelligent Transport Systems - eCall – High Level Application Protocols
High Level Application Protocols
CEN EN 16062
Intelligent transport systems - ITS Safety and emergency messages using any available wireless media - Data registry procedures
Data registry procedures
ISO/EN 24978:2009
11/14/2018

10. eCall Standards (2) Title Description Reference 11/14/2018
3rd Generation Partnership Project; Technical Specification Group Services and System Aspects Service aspects; Service principles (Release 9)
eCall requirements for data transmission
3GPP TS
ETSI TS
3rd Generation Partnership Project; Technical Specification Group Core Network and Terminals; Mobile radio interface Layer 3 specification; Core network protocols; Stage 3 (Release 8)
eCall Discriminator Table d
3GPP TS
ETSI TS
3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; eCall Data Transfer; In-band modem solution; General description (Release 8)
eCall Data Transfer – General Description
3GPP TS
ETSI TS
3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; eCall Data Transfer; In-band modem solution; ANSI-C reference code (Release 8)
eCall Data Transfer - ANSI-C Reference Code
3GPP TS
ETSI TS
3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; eCall Data Transfer; In-band modem solution; Conformance testing (Release 8)
eCall Data Transfer – Conformance Testing
3GPP TS
ETSI TS
11/14/2018