Download presentation
Presentation is loading. Please wait.
1
ABB Graphical display for UPS
2
One device for more purposes
Graphical Display One device for more purposes The graphical display serves for various purposes such as: UPS display for PowerWave 33 S kW Optional UPS display for PowerWave 33 S kW System display for Conceptpower DPA 500 Remote panel for the other UPS models
3
Graphical Display Highlights 7‘‘ touchscreen interface
Clear view of the status of the UPS Quick access to useful information Easy control of the entire system Multiple languages 7‘‘ touchscreen interface Interactive mimic diagram Colored and graphical display Integrated buzzer for alarms Very low power consumption 17 languages selection Extended events log (up to 1000 events) Interfaces: RS 485/SPI, SD card, USB Up to 100m distance from the UPS when used as remote panel
4
Graphical display Overview UPS load status Time
Quick access to mimic diagram Date UPS positioning in a parallel system Quick access to service, operation and information menus Modules selection Measurements Status of UPS Direct access zones to specific menus
5
Graphical Display Navigation screen Alarms and events log
Service setup UPS measurements User setup UPS commands UPS information © ABB Group Month DD, Year
6
Graphical Display Multiple languages Available languages: Dutch
English Finnish French German Hungarian Italian Romanian Polish Portuguese Russian Spanish Swedish Turkish Chinese Slovenian Norwegian © ABB Group Month DD, Year
7
Graphical display Emergency buttons I/O PORTS SD Card
Slot for the SD card USB USB connector DC Input Power supply connector (only needed if the RJ-45 cable is >75m & <100m) UPS Input RJ-45 connector LED’s UPS Status GREEN: when the UPS is on inverter mode RED: when the inverter is on alarm Alarm OFF: if no alarm present RED: if unread alarm(s) present BUTTONS Reset Reset of the display ON/OFF 1/2 Pressing ON/OFF 1 + ON/OFF 2: UPS shutdown / UPS startup Pressing ON/OFF 1 + Reset: Touch screen calibration
8
UPS display PowerWave 33 S2
9
UPS display PowerWave 33 S2 Standard on PW33 250-500 kW
PW includes Graphical Display feature (S2) PowerWave kVA TFT (S2) PowerWave kVA TFT (S1) PowerWave kVA TFT (w/out Man. Bypass) (S1) PowerWave kVA TFT (w/out Man. Bypass) Optional on PW kW GRAPHICAL DISPLAY FOR PW kVA only factory mounted Graphical Display PW kVA 4NWP101339R0001 Graphical Display PW33 200kVA
10
System display Conceptpower DPA 500
11
Graphical touchscreen display
System Display Graphical touchscreen display Clear system overview, measurements and system status Navigation into module level, module level measurements and status System level commands Modules selection to access the module level measurements and status System level measurements © ABB Group Month DD, Year
12
Remote graphical display
Remote panel Remote graphical display
13
Remote graphical display
Remote real-time surveillance Status, meaurements and events of each single UPS or module Can be placed either on a desk or fixed to a stand or wall. Can be installed up to 100m far from the UPS (RJ-45)
14
Remote graphical display
Compatibility PowerWave 33 DPA UPScale Conceptpower DPA 500 Quantity of remote graphical displays 1 per UPS frame 1 per system* Quantity of remote graphical displays if using SNMP multidrop 1 per system * The remote graphical display can only be installed if the UPS system graphical display is not used because they are connected to the same port in the interface board. © ABB November 15, 2018
15
Remote graphical display
Included accessories The package includes the following items: 1x Remote graphical display 2x mounting screws 4.5x45mm 2x M6 washer 2x wall plugs 1x RJ-45 cable (25m) 1x User manual © ABB November 15, 2018
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.