1. Lift Eyes Tolerance Change for EPA2017 Horizontal Systems- Updated EI & EO Linear Tolerance
CEAF Type: Change Approval Request
Technical Configuration(s) Affected: D313029BX03, D563025BX03 , D103016BX03
Engine Family Affected: ISB, ISL, ISX
Market(s) Impacted: On-Highway.
Anticipated Production Date (mm/yy): 10/2016
Option(s) Affected: PE9487, PE9485, PE9486, PE9532, PE9483, PE9534, PE1072, PE1073.

2. Overview of Change
Immediate need to deviate from current lift eye tolerances due to limited manufacturing process capability.
This would be followed by a change of lift eye tolerance callouts on P-phase prints.
Configurations Impacted: All Horizontal Systems

3. Print Tolerance Callout Change on Side Inlets and Side Outlets
+/-3°
Lift Eye Tolerance Change on Side Inlets and Side Outlets:
Linear: +8mm/- 5mm
Angular: +/- 3°
The P-phase prints will include lift eye tolerances that are smaller or equal to the above listed values.
+8mm/- 5mm
Current Lift Eye Tolerance Callout on Prints

4. Print Tolerance Callout Change on End Inlets and End Outlets
Lift Eye Tolerance Change on End Inlets and End Outlets:
Linear: +2.5mm/-5mm Angular: +/- 3 °
The P-phase prints will include lift eye tolerances that are smaller or equal to the above listed values.
+2.5mm/-5mm
+/-3°
Current Lift Eye Tolerance Callout on Prints