1. Quick Start Guide
79-56 Bending Tester
GM Pro 7.4

2. Connect the device
In order to communicate the bending tester and the PC must be connected using a mini USB cable (Buchel item no: ).

3. Double-Click on GraphMaster
Activate the device
Double-Click on GraphMaster

4. Activate the device
Click on Add Device

5. Activate the device
Type the model “76-56”

6. Activate the device
Click on Install

7. Activate the device
Click on Yes

8. Activate the device
Click on Next

9. Activate the device
Plug the USB cable
Turn ON the instrument

10. Activate the device
Click on Next

11. Wait the scan

12. Activate the device
Click on Next

13. Double click on 79-56 Bending Tester
Collect the tests
Double click on Bending Tester

14. Select the “Default” procedure
Collect the tests
Select the “Default” procedure

15. Collect the tests
Click on Open

16. Fill the identification
Collect the tests
Fill the identification

17. Collect the tests
Click on Parameters

18. Set the test parameters
Collect the tests
Set the test parameters

19. Click on OK

20. Collect the tests
Load the sample

21. Collect the tests
Click on Start

22. Collect the tests

23. Click on New Test or change the direction or Exit
Collect the tests
Click on New Test or change the direction or Exit
to save the data

24. Collect the tests
Click on Yes