1. LEarNer© Burn Chamber
Specific Areas Detail

2. Burn Chamber Specified Areas
The burn chamber includes 18a, and all areas open to the hydrogen gas and LENR fuel.
8/28/2012
Burn Chamber Specified Areas

3. Burn Chamber Specified Areas
Specific Areas
16b. Heater Shim
16c. Heater Element
16d. Heater Flat
17a. Holder Coils
17b. Holder Bottom
17c. Gas Groove
17d. Liquid Groove
18a. Fuel Chamber
18b. Spark Induction
18c. Fuel Suspension
18d. Heater Chamber
18e. Gas Inlet
28a. ¾” x 12 TPI
28b. Plug Flat
28c. Seal Flange
35a. Top Shim
35b. Bottom Shim
36a. Expansion Chamber
37a.-38a. Connection a
37b.-38b. Connection b
8/28/2012
Burn Chamber Specified Areas

4. Burn Chamber Specified Areas
Shim(s) – a.- 35b. & 18b. Are intended as a pack together that adjust the Burn
Chamber components for sealing and anti vibration purposes.
Flats 28b. & 16d. Are hex flats for a wrench 7/8”.
Pressure seals & 32. are high pressure seals (copper) for sealing the Burn
Chamber.
Grooves 17c. & 17d. Are machined into the holder(s) and provide hollow passages
for gas and liquid to pass across and into a chamber that collects the liquid from
the dry powder/H20 hydrogen generation method and then continues through and
into the Heat Chamber 18d. and continues the path through a miniature hollow
passage 18e. at a rate that fills a double cone geometry hollow 36a. and passes
through the 36. jet opening into Burn Chamber 18a.
Fuel Chamber 18. is designed for the nano powder nickel fuel mix and the high
voltage electrostatic spark induces a field in area 18b. which in turn induces a
magnetic gauss 18c. as to attract the Fe nano particles and agitate the powder fuel.
8/28/2012
Burn Chamber Specified Areas