Presentation is loading. Please wait.

Presentation is loading. Please wait.

Module F: Presentation Understanding Robot Fundamentals

Similar presentations


Presentation on theme: "Module F: Presentation Understanding Robot Fundamentals"— Presentation transcript:

1 Module F: Presentation Understanding Robot Fundamentals
Department of Defense Education Activity Robotics Engineering – CTE502 Career and Technical Education Robotics Engineering (CTE502) – DoDEA Career and Technical Education Module F: Presentation – Understanding Robot Fundamentals Revised 17 November 2018

2 NXT-G Programming

3 Learning outcomes Write a simple programs that will drive the tri-bot in a square. Add a loop to the program to make a square in as few statements as possible. Wait to start the square when a loud sound is sensed. Switch between a left turn and right turn square based on lighting levels in the room.

4 NXT Intelligent Brick, Motors, and Sensors

5 Collection of Training Robot Platforms

6 NXT Interface Play selected program section NXT window
Stop NXT window Download and play entire program Download

7 NXT programming environment

8 Motor Block 1 Motor port selection (C & B) 2 Motor direction (Forward)
3 Motor power from (about 75) 4 Length of motor turn (Rotations)

9 Motor Control Panel Port Direction Steering Power
Duration (Rotations, Unlimited, Degrees & Seconds) Next action

10 Sound Allows the programmer to add audible output to the robots program. 1. Action 2. Control 3. Volume 4. Function 5. File 6. Wait

11 Display Displays an output picture. 1. Display action
2. Display or clear 3. Image file name 4. Image location

12 Wait Time Touch Light Sound Ultrasonic
Wait till the touch sensor is pressed. Wait till the sound sensor in port 2 hears a sound greater than 50.

13 Loops Forever Sensor Time Count Logic Sensor controlled loops
Time controlled loops

14 Switch controlled by values
The switch takes an wire input at 1 If the condition is met the upper path is taken, otherwise the lower path is executed.

15 Switches controlled by sensors
The value of the light sensor in port 3 is read. If it is greater than 50 turn right, less than 50 turn left.


Download ppt "Module F: Presentation Understanding Robot Fundamentals"

Similar presentations


Ads by Google