1. 10/100Base-TX to 100Base-FX Redundant Media Converter
FT-1105A
FT-1205A
Copyright © PLANET Technology Corporation. All rights reserved.

2. Presentation Outline

3. Presentation Outline Product Overview Product Benefits
Product Features
Application
Available modules

4. Product Overview 10/100TX to 100FX Redundant Media Converter
3-port Media Converter
Either 3-port switch mode or 2-port conversion with redundant mode
10/100 TX
100 FX
FT-1105A
Model
FT-1105A
FT-1205A
Fiber Connector
1 x 100Base SFP
2 x 100Base SFP
Copper
2 x 10/100Base-TX
1 x 10/100Base-TX
Redundant Link
Port-2 and Port-3
Port-1 and Port-2
FT-1205A

5. Product Overview Redundant Pair FT-1105A Front Panel
1-Port 100Base-FX Fiber Port
2-Port 10/100Base-TX Copper Port
FT-1205A Front Panel
2-Port 100Base-FX Fiber Port
1-Port 10/100Base-TX Copper Port
Redundant Pair

6. Product Overview FT-1105A / FT-1205A Rear Panel 1 x 5V/2A DC Jack
1 x 2-DIP switch

7. Product Benefits Hardware
Fibers or copper links to automatically recover less then 10ms
Not only a Media Converter, but also an Ethernet switch.
Compact size work with MC-700/1000R/1500 family media chassis
Prevent packet loss with backpressure (Half-Duplex) and PAUSE frame flow control (Full-Duplex)
Auto-MDI / MDI-X on Copper port
Plug and play

8. Features FT-1105A Standard Interface Mechanical
Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX
IEEE 802.3x Full-Duplex Flow-Control, Back-Pressure in Half-Duplex eliminate packets loss
Interface
Dual 10/100Base-TX Copper, One 100Base-FX SFP Fiber optic
Auto-Negotiation for 100Base-TX Half-Duplex or 100Base-Full-Duplex
Supports Auto MDI/MDI-X function
Supports Maximum frame size up to 2046Kbytes.
Mechanical
External 5V/2A DC power supply
LED indicators for easy network diagnose
DIP Switch for 3-Port operation with Fast Ethernet Switch mode or Redundant mode
DIP switch for LBR (Loop Back Reply) on / off selection
Compact size work with PLANET MC family Media Chassis ( MC-700/1000R/1500)
EMI standards comply with FCC class A, CE class B
10/100 TX
100 FX
10/100 TX
Switch mode
10/100 TX
100 FX
< 10ms
10/100 TX
Redundant mode

9. Features FT-1205A Standard Interface Mechanical
Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX
IEEE 802.3x Full-Duplex Flow-Control, Back-Pressure in Half-Duplex eliminate packets loss
Interface
Dual 100Base-FX SFP Fiber optic, One 10/100Base-TX Copper
Auto-Negotiation for 100Base-TX Half-Duplex or 100Base-Full-Duplex
Supports Auto MDI/MDI-X function
Supports Maximum frame size up to 2046Kbytes.
Mechanical
External 5V/2A DC power supply
LED indicators for easy network diagnose
DIP Switch for 3-Port operation with Fast Ethernet Switch mode or Redundant mode
DIP switch for LBR (Loop Back Reply) on / off selection
Compact size work with PLANET MC family Media Chassis ( MC-700/1000R/1500)
EMI standards comply with FCC class A, CE class B
10/100 TX
100 FX
100 FX
Switch mode
10/100 TX
100 FX
< 10ms
100 FX
Redundant mode

10. Redundant Features
Link status auto detect and redundant on Dual ports with same connector type.
Only Primary-Port is active at a time, the Backup-Port is blocked.
While Primary-Port link fail occur, the traffic swap to Backup-Port automatically.
Once the Primary-Port status back to link up, the traffic swap from Backup-Port to Primary-Port.
Hardware redundant swap less than 10 ms.
依照SFP模組可彈性的延伸距離,滿足不同的需求
結合Layer 2 switch 的功能,及Media Converter 的特性

11. Fiber-optic Networking for ISP, enterprise, and home
Application
Fiber-optic Networking for ISP, enterprise, and home
The PLANET FT-1105A/1205A are 3-Port Redundant Media Converter which support conversion between 10/100Base-TX and 100Base-FX network. The difference with the other one-port channel media converter is the Redundant Media Converter is designed for critical networks that require fibers or copper links to automatically recover less then 10ms, such as ISPs, telecom, hospitals, banks and enterprises.
With high performance data transmit and easy installation, the FT-1105A/1205A can building a ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building) for small office network environment from enterprise.

12. Fault Tolerant Redundant Link for critical network applications
The FT-1105A and FT-1205A are designed for optical fiber networks that require rapid link redundancy. With the auto-recover less than 10ms, the two redundant media converters provides the rapid responded time required for critical applications.

13. Application – FT-1105A Copper Link Redundant
2 km
Primary Link 100Base-TX Copper
( Forwarding)
Fail
100Base-FX Fiber
2km
Backup Link 100Base-TX Copper
( Standby)

14. Application – FT-1105A Switch Mode

15. Application – FT-1205A Fiber Link Redundant
Primary Link 100Base-FX Fiber ( Forwarding)
Broken
Backup Link 100Base-FX Fiber ( Standby)
20 km

16. Application – FT-1205A Critical Network Service
Primary Link 100Base-FX Fiber ( Forwarding)
Copper 10/100Base-TX
Backup Link 100Base-FX Fiber ( Standby)

17. Application – FT-1205A Switch Mode - Distance Extension
MFB-F20
MFB-F20
100Base Fiber
20 km
100Base Fiber
20 km
40 km

18. Related products Standard Media Converter Chassis
10-inch (MC-700), 19-inch (MC-1000R, MC- 1500) rack-mountable, 2.4U high
7, 10, 15-Slot media converter chassis, with hot swappable slot
Per-slot power isolation for hot-swap and per slot protection
Redundant power (RPS-120W) with options for MC-1000R
Sufficient power supply system
Reduce the effort of converter maintenance and management
Support PLANET FT and GT series media converters
MC-1000R
RPS-120W
(Redundant Power
Supply)
MC-1500
MC-700

19. Available modules Related 100Base-FX SFP Transceiver modules
MFB-FX SFP-Port 100Base-FX Transceiver (1310nm) -2km
MFB-F20 SFP-Port 100Base-FX Transceiver (1310nm) – 20km
MFB-FA20 SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm) -20km
MFB-FB20 SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm) -20km