1. Topics: Arduino Target Package
Arduino Part 4
Topics:
Arduino Target Package

2. MathWorks Solutions(review)1
Arduino IO Package:
Used to perform analog and digital input and output as
well as motor control from the MATLAB command line 2
Arduino Target:
Used to compile and download Simulink® code directly to
the Arduino board

3. Workshop Overview Getting started Hands-on Project 1: LED control
Hands-on Project 2: LED dimmer

4. 1 2 3 Getting started Install Matlab 2012a or later version
In a MATLAB® Command Window, enter targetinstaller. 3
Choose to get the support package from the Internet or from a folder.

5. Getting started(cont.)4
Select the Install check box for either Arduino® target, and click Next > 5
Click install
ArduinoIO

6. Getting started(cont.)
Click 7
Click simulink icon to launch simulink library browser.
Library target for use with arduino hardware

7. Hands-on Project 1: LED blink
Prepare your simulink block:
Output to arduino led pin13

8. Hands-on Project 1: LED blink2
Click tools > Run on Target Hardware > prepare to Run
click

9. Hands-on Project 1: LED blink3
Click OK
click

10. Hands-on Project 1: LED blink4
Click tools > Run on Target Hardware > Run
click

11. Hands-on Project 1: LED blink5
Make sure your model has been successfully downloaded to arduino and
observe the onboard LED

12. Hands-on Project 2: LED dimmer1 2
Hardware
Simulink model
R 1k Ohm
R 220 Ohm

13. Hands-on Project 2: LED dimmer3
Click tools > Run on Target Hardware > Run
click

14. http://www.mathworks.com/har dware-support/arduino- matlab.html
dware-support/arduino- matlab.html
References