1. End-to-end Anomalous Event Detection in Production Networks
Les Cottrell, Connie Logg, Felipe Haro, Mahesh Chhaparia (SLAC), Maxim Grigoriev (FNAL), Mark Sandford (Loughborough University)
Site Visit by Thomas Ndousse April 27, 2005
Network administrators and others need ways to be notified when there are significant, persistent anomalous changes in network performance that may require intervention. We have successfully implemented techniques (plateau algorithm and Kolmogorov-Smirnov) to find such step changes in time series measurements of network performance. However, if there are large seasonal changes (e.g. day/night, weekday/weekend) then the number of false positives or misses can be larger than desirable. We are thus working with FNAL to evaluate seasonal effect algorithms (e.g. Holt-Winters) on real production network performance measurements. We will present results on the performance of such algorithms as well as plans to evaluate methods to look at multiple metrics (e.g. capacity, available bandwidth, RTT, multiple paths) simultaneously using Principal Component Analysis.
Partially funded by DOE/MICS for Internet End-to-end Performance Monitoring (IEPM)

2. Outline Why? Input data How? Results Conclusions & Futures
First approaches
The real world
Results
Conclusions & Futures

3. Uses of Techniques Automated problem identification:
Alerts for network administrators, e.g.
Bandwidth changes in time-series, iperf, SNMP
Alerts for systems people
OS/Host metrics
Anomalies for security
Forecasts (are a fallout of the techniques) for Grid Middleware, e.g. replica manager, data placement

4. Data Uses packet pair dispersion of 20 packets to provide:
Capacity, X-traffic, available bandwidth
At 3 minute intervals
Very noisy time series data
Moving averaged
over 1 hour
Capacity

5. Plateau, most intuitive
Each observation:
If outside history buffer mean mh ± b*sh then add to trigger buffer
Else add to history, and remove oldest from trigger buffer
When trigger buffer > t points then trigger issued
Check if (mh - mt) / mh > D & 90% trigger in last T mins then have trigger
Move trigger buffer to history buffer
Observations
Event *
= history length = 1 day,
t = trigger length = 3 hours
= standard deviations = 2
We set the history buffer length to one day in order to minimize the lag between the history mean and the observations due to diurnal changes.
Trigger % full
History mean
History mean – 2 * stdev

6. K-S
For each observation: for the previous 100 observations with next 100 observations
Compare the vertical difference in CDFs
How does it differ from random CDFs
Expressed as % difference
The trigger buffer reporting the event well after start of step down is partially an artifact. It could for example report the time of the start of the event as say when the trigger buffer reached 10% full. However, K-S is still more accurate in defining the time when the change was greatest.
Compare K-S with Plateau

7. Compare
Results between K-S & plateau very similar, using K-S threshold = 70%
Current plateau only finds negative changes
Useful to see when condition returns to normal
K-S implemented in C and executes faster than Plateau (in Perl), depends on parameters
K-S more formalized
Plateau and K-S work well for non seasonal observations (e.g. small changes day/night)
Plateau takes about 14 mins for 100 days
H-W FNAL takes 7 mins
K-S takes 1.08 min on points
3.07 min on points
14.75 min on points

8. Seasons & false alerts
Congestion on Monday following a quiet weekend causes a high forecast, gives an alert
Also a history buffer of not a day causes History mean to be out of sync with observations

9. Effect on events
Change in bandwidth (drops) between 19:00 & 20:00 causes more anomalous events around this time

10. Seasonal Changes Use Holt-Winters (H-W) technique:
Uses triple exponential weighted moving average
EWMA(i) = Obs(i) * a + (1-a) * EWMA(i-1)
Three terms each with its own parameter (a, b, ) that take into account local smoothing, long term seasonal smoothing, and trends
The trend component for our data is flat.

11. Example Local smoothing 99% weight for last 24 hours
Linear trend 50% last 24 hours
Seasonal 99% for last week
Within an 80 minute window, 80% points outside deviation envelope ≡ event
Observations
Deviations are smoothed absolute residuals
Note the difference in weekend vs weekday
Deviations
Forecast
Weekend
Weekdays

12. Evaluation
Created a library of time series for 100 days from June through Sep 2004 for 40 hosts
Analyzed using Plateau and saved all events where trigger buffer filled (no filters on size of step)
23 hosts had 120 candidate events
Event types: steps; diurnal changes; congestion from cron jobs, bandwidth tests, flash crowds
Classify ~120 events as to whether interesting
Large, sharp drop in bandwidth, persist for >> 3hrs
Plateau easiest to understand and tune etc. also first to be developed.
Classification is subjective, large (mh-mt)/mh> 10%, also looked at 30%, step occurs in <4 hours

13. Results K-S shows similar results to Plateau
As adjust parameters to reduce false positives then increase missed events
E.g. for plateau with trigger buffer = 3 hrs filled to 90% in < 220 minutes, history buffer=1 day, effect of threshold D=(mh-mt)/mh
Plateau (b=2)
K-S with ± 100 observations D
False
Miss
10%
16% 8%
30% 2%
32%

14. Conclusions A few paths (10%) have strong seasonal effects
Plateau & K-S work well if only weak seasonal effects
K-S detects both step downs & up, also gives accurate time estimate of event (good for correlations)
H-W promising for seasonal effects, but
Is more complex, and requires more parameters which may not be easy to estimate
Requires regular data (interpolation step)
CPU time can depend critically on parameters chosen, e.g. increasing K-S range from ±100 to say ±400 increases CPU time by factor 14
H-W works, still need to quantify its effectiveness
Looking at PCA to evaluate multiple metrics simultaneously (e.g. fwd & bwd traffic, RTT, multiple paths) AND multiple paths

15. Future Work
Improve the event detection technique for Holt-Winters (HW) method.
We tried to apply KS on the residuals of HW Technique, but this does not seem to come up well.
Next we plan to apply plateau on the residuals on HW.
Future Development in PCA
Enable looking at multiple measurements simultaneously
E.g. RTT, loss, capacity …; multiple routes
Neural networks to interpolate heavyweight/infrequent measurements based on light weight more frequent

16. More information SLAC Plateau implementation
SLAC H-W implementation
www-iepm.slac.stanford.edu/monitoring/forecast/hw.html
Eng. Statistics Handbook
Comparison Between Mark Burgess Method & KS

17. Diurnal Variation
People arriving at work between 19:00 & 20:00 PDT (7:00 & 8:00 PK time) cause sudden drop in dynamic capacity

18. H-W Implementation
Need regularly spaced data (else going back one season is difficult, and gets out of sync):
Interpolate data: select bin size
Average points in bin
If no points in first week bin then get data from future weeks
For following weeks, missing data bins filled from previous week
Initial values for smoothing from NIST “Engineering Statistics Handbook”
Choose parms by minimizing (1/N)Σ(Ft-yt)2
Ft=forecast for time t as function of parameters, yt = observation at time t
A week is special and defines a cycle of seasons. We do nothing special with the day.
Note we need a weeks worth of data to get going

19. H-W Implementation Three implementations evaluated (two new)
FNAL (Maxim Grigoriev)
Inspiration for evaluating this method
Part of RRD (Brutlag)
Limited control over what it produces and how it works
SLAC
Implemented NIST formulation, different formulation/parameter values from Brutlag/FNAL, also added minimize sums of squares to get parms

20. Events Can look at residuals (Ft – yt), or Χ2
Could use K-S or plateau on: residuals, or on the local smoothing (i.e. after removing long term seasonal effects)

21. Mark Burgess Method
A two dimensional time-series approach in order to classify a periodic, adaptive threshold for service level anomaly detection
An iterative algorithm is applied to history analysis on this periodic time to provide a smooth roll-off in the significance of the data with time.
This method was originally designed to detect anomalous behavior on a single host.

22. Compare with KS Mark Burgess technique detects the anomalies for
Iperf from SLAC to Caltech – Feb & Mar 05
KS-Result
KS Technique works Very well for the long Term anomalous
Variations in internet End-to-end traffic.
Mark Burgess
technique detects
the anomalies for
each and every
Unwanted huge
spikes/variation
(Real Time)
Mark Burgess Tech-Result

23. PCA
PCA is a coordinate transformation method that maps a given set of data points onto new axes. These axes are called the principal axes or principal components.
For network anomaly detection PCA divides the data into normal & abnormal subspace
Procedure
Arrangement of data into matrix form
Zero meaning the matrix data
Calculating the covariance matrix
Calculate principal components
Application of the formulae (I-PPT)(data-matrix) yields the result. P is the matrix of Principal Components.

24. PCA Results on SLAC-BINP (June-Sep, 2004)
Due to 10%
rise in dbcap
Anomalous Good Events
10% rise in RTT
Caught all the events that were detected by HW, Plateau and KS
Can work on multiple parameters
Tested PCA on six routes so far SLAC-FZK, SLAC-DESY, SLAC-CALTECH, SLAC-NIIT, SLAC-BINP, SLAC-UMICH