1. Commissioning Power Supply NTI/Z 28.30.1
ABB i-bus® KNX
Commissioning Power Supply NTI/Z

2. Commissioning Power Supply NTI/Z 28.30.1
Application
The device is used for on site commissioning of KNX devices should KNX system voltage be unavailable. The most important functions of a KNX device with manual operation can be tested.
E.g.: - Pre-assembled Fan Coil Actuator in Fan Coil Unit - There is no KNX system voltage in the building yet - With connection of the NTI/Z the basic functions of the the Fan Coil Actator can be tested via the manual keypad.

3. Commissioning Power Supply NTI/Z 28.30.1
Application
FCA/S 1.1M
NTI/Z

4. Commissioning Power Supply NTI/Z 28.30.1
Technical Data
Power Supply: 85…265 V AC
Rated output voltage: 21…28 V DC SELV
Rated output current: 30 mA
Supply (Euro plug, approx. 1.5 m)
Output (pluggable connection terminal)
LED green (in operation)
LED red (short circuit, overload) 1 2 3
h = 25,5 4

5. Commissioning Power Supply NTI/Z 28.30.1
Ordering details
Type MW
Order Code
Price Group
NTI/Z -
2CDG R0011 26