1. Layer Management and MIBs Sections Report
IEEE RPRWG

2. LM Comments summary 14 comments 2 comments accepted
7 editorial: Not discussed since section editor absent
6 Technical non-binding
1 Technical binding
2 comments accepted
5 accepted-modified
IEEE RPRWG

3. Highlights
Rename the MIB attributes in order to be consistent with other section’s abbreviations
Break the table that specifies the MIB and their description into a few tables to improve readability and clarity
Generalize the primitives between the management and the MAC MIB attributes so they will cover all private primitives that were defined in other sections.
IEEE RPRWG

4. Annex E Comments summary
11 editorial: Not discussed since section editor absent
21 Technical non-binding
2 Technical binding
7 comments accepted
10 accepted-modified
4 rejected
2 withdrawn
IEEE RPRWG

5. Rejected Comments #427 #40 #87 #44
Add new table. Commenter was requested to resubmit a detailed comment and proposed resolution
#40
Change the index to Topology table. The proposed resolution doesn’t improve the table structure
#87
MIB to support multiple ringlets. Wasn’t addressed by the group
#44
Add a new object tote/deactivate the protection switching capability on SD. Alternatively, SD threshold can be set higher than SF.
IEEE RPRWG

6. Highlights Release the MIBs to the IETF after it will be completed
Should the IEEE provide a separate ascii file of the MIB tables
Incorporate references from the MIBs description to the relevant sections in the draft
Add Total statistics tables to the MIB. OAM clause will determine optionally of the intervals vs. total statistics
MIB attributes will follow changes in the drafts
IEEE RPRWG