1. Jute Padding 1974 TCS before removal

2. Jute Padding 1974 TCS

3. Jute Padding 1974 TCS Chassis section of jute
Cloth backed rubber ‘Y’ piece, thick
Top ‘Y’ piece, two pieces of jute bonded 0.25” ” thick

4. Jute Covering Main Box Section of Chassis All dimensions in inches & symmetric about centerline Start with a piece 60 x 28, you’ll have plenty Cut the external dimensions oversize and the internal undersize and fit to chassis
Total length 57.5
5.50
10.25
16.125
2.75
6.00
4.75
26.125
29.0
6.50
3.25
2.50
Front end is square to the centerline, just the picture angle
45 degree angle
24.0
23.25
14.375
49.0 to the corner
Thickness is 0.25 after 30 plus years

5. Front cross-member and rear Y piece
26 x 2.25 x 0.50 thick
Rubber side on the bottom. Basically thick rubber with a thin cloth backing
1 layer 0.25 jute bonded to second layer 0.50 jute
0.75 total thickness
Both pieces the same size but different thicknesses
4.50
5.0
13.75
14.75