2. 5 pcs ,fasten the tray, please pay attention ,
Screw 1 and 2 are the same. 1 for the body and tray, 2 for body and cover, 3 for body and columns

3. Put on the columns, connect the back wall with columns, each side 5 pcs screws
Screw 1 and 2 are the same. 1 for the body and tray, 2 for body and cover, 3 for body and columns

4. connect the columns with ring

5. 5 pcs ,fasten the cover
Screw 1 and 2 are the same. 1 for the body and tray, 2 for body and cover, 3 for body and columns

6. Install two fixed glass, put the glass into the plate and fasten
Install two fixed glass, put the glass into the plate and fasten. For first fixed glass, must let one person to hoist the cover
Do not tighten screws too hard, grey plastic will break over time

7. Put the small wheel into the upside hole of door glass, and hang the door like this
bigger
small

8. bigger
small
Put the bigger wheels into the downside hole of door glass, put two pcs wheels at the same time

10. Connect hose, 5 to 5, 6 to 6

11. This hose to the top shower

12. The longest metal hose is connect it to the steam generator
But connect like this
go out from this hole, then connect steam generator
Hose go into this hole

13. Connect with loudspeaker
Connect with fan

14. Loosen the wire of antenna, put it to the top of cover

15. Background light

16. This soft seal install between the glass and column, the same in another side

17. The grey rubber is for replacement, when the original one is broken and leaking. So no need to install this grey rubber.
This white rubber can be dropped off ,not need this.