1. Changing the orientation of the adjusting link within CF Options to resolve interference issue Options Impacted: CF , CF , CF , CF , CF , CF , CF Engine Family: D1H (ISB6.7 G), D31 (B6.7 L), D32 (QSB4.5 L) Date: 3/23/2017

2. Project Scope Change Summary:( Description of change)
Changing the orientation of the adjusting link within the CF options, rotate the part by 180°.
Background:( Reason for change)
To improve the robustness of the wiring harness and cover exposed wires, the new wiring harness comes with a backshell on the Oil Pressure Sensor/Switch, and the backshell is interfering with the CF options (adjusting link within the option).
Making this change will allow us to create clearance between the harness backshell and not to have to remove the backshell in order to avoid this interference issue

3. Change Summary (Using Graphics)
Current Option
Proposed Orientation
Orientation change

4. Overlay of Proposed option & Current option
Red = Proposed orientation
Yellow = Current orientation

5. Current Overlay Integration on Engine

6. Proposed Overlay Integration on Engine

7. Current Option on Engine Fit Check
23°
CF bracket at initial position
CF bracket fully extended
Note: the angular displacement of the front face of the bracket was measured to 23° (+/-2) from vertical plane

8. Proposed Orientation on Engine Fit Check
23°
CF bracket at initial position
CF bracket fully extended
Note: the angular displacement of the front face of the bracket was measured to 23° (+/-2) from vertical plane