1. Certification Exam Insights
Lars Christensen
CADimensions

2. Agenda… What is SolidWorks certification about
CSWA vs. CSWP vs. CSWE and all the other ones
What is the requirements?
How do I get it?
How is these things are constructed?
Lets get SolidWorks rocking!
Tips, tricks and of course if any questions

3. What is SolidWorks certification about
SolidWorks certifications can be used as a benchmark to measure your knowledge and competency with SolidWorks software.
CSWA A CSWA certification is proof of your SolidWorks® expertise – cutting-edge skills that businesses seek out and reward.
CSWP A CSWP has proven their ability to design and analyze parametric parts and moveable assemblies using a variety of complex features in SolidWorks.
CSWE A CSWE is able to solve practically any modeling problem given to them, and is traditionally the go-to SolidWorks user among their colleagues.

4. Other certifications…
CSWP-Sheet Metal
CSWP-Weldments
CSWP-Surfacing
CSWP-Mold Tools
CSWSP-FEA

5. What is the requirements?
You need internet connection doing the whole test.
You can take the test on any level of SolidWorks 2008 or later.
There is a 30-day waiting period before retaking the CSWA, and there is a 14-day waiting period before retaking any CSWP segment exam.
I do not use SolidWorks or SolidWorks Simulation. Can I still take the exam with an evaluation copy? Yes. But you will have to get the evaluation version from one of the SolidWorks resellers in your area.

6. How do I get it?

7. How is these things are constructed?
CSWA = 3 hours Exam with a 70% minimum passing rate
Exam features hands-on challenges in many of these areas:
Sketch entities - lines, rectangles, circles, arcs, ellipses, centerlines, Sketch tools - offset, convert, trim, Sketch relations, Boss and cut features - extrudes, revolves, sweeps, lofts, Fillets and chamfers, Linear, circular and fill patterns, Dimensions, Feature conditions – start and end, Mass properties, Materials, Inserting components, Standard mates - coincident, parallel, perpendicular, tangent, concentric, distance, angle
Reference geometry – planes, axis, mate references, Drawing sheets and views, Annotations

8. How is these things are constructed?

9. How is these things are constructed?
Sample CSWA Exam link:

10. How is these things are constructed?
CSWP= 3 hours 30 minutes exam with a 75% in each segment
Segment 1: (90 Minutes)
Create a part from a drawing
Segment 2: (40 Minutes)
Modify existing part
Segment 3: (80 Minutes)
Creating an assembly
Sample CSWP Exam link:

11. Tips & Tricks “Ctrl+” to copy parts in assembly mode.
Coordinate System.
Distance Mate.
With Mate.
Collision Detection.
Simulation Express
Face+edge = Angular Reference Plane.

12. I need more information…
Become a Certified SolidWorks Associate by Mark Martel
How to Become a CSWP by Mark Martel
CSWP Preparation by Chris McAndrew

13. Looks familiar