1. Boiling Water Make-up Lab
Make sure you have the lab sheet to collect, record
and analyze your data.

2. How to do the lab:
The lab will basically take you through everything you need to complete the activity.
Click through the animations slowly and make sure each animation is totally done before you click again.
Watch the temperatures on the thermometer as time goes by (it is pretty close to how the real lab worked)

3. water (ice) into a beaker and measure it initial temperature
First, we are going to
drop a solid block of
water (ice) into a beaker
and measure it initial
temperature
On the thermometer, there
Are three types of lines:
Short black: 2.5 degrees
Long black: 5 degrees
Long blue: lower one is 0 degrees,
middle one is 50 degrees,
upper one is 100 degrees
Solid Block
of water (ice)
Now watch the temperature
as the time goes by. Every
minute, take a temperature
reading and record it in
your data table.
350
300
250
SUCCESS!!!
We have accomplished
boiling water. Now take readings for 3 more minutes (no, the PPT is NOT broken) and then answer the questions on your lab:
200
150
Watch, as the “ice” melts away
the water becomes a liquid.
After the flame is added, the
temperature will soon
begin to rise
100 50